Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Contents Safety....................................................................... E1 Remote Control Unit................................................ E2 ~ E3 Copyright & Glossary............................................... E4 STB Connections..................................................... E5 ~ E7 Guide of Functions .................................................. E8 ~ E9 Guide of Main Menu ................................................ E10 ~ E24 Troubleshooting Guide ........
Inhaltszusammenfassung zur Seite Nr. 3
Safety This STB has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully. MAINS SUPPLY : 190 - 250 V AC 50/60 Hz OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. LIQUIDS : The STB shall not be exposed to dripping or splashing and that no objects filled with liquids, such as base, shall be placed on the apparatus. CLEANING : Disconnect the STB from the wall outlet b
Inhaltszusammenfassung zur Seite Nr. 4
Remote Control Unit E2
Inhaltszusammenfassung zur Seite Nr. 5
1 NUMERIC BUTTONS CATV 10 Press to select a service, enter your PIN code or Press to select the CATV mode. numeric on the menu. 11 TV/RADIO 2 INFORMATION(RED) Press to select the TV/RADIO mode. Press to display the programme information box on the screen. And this button functions same as 12 MUTE the RED button on the menus. Press to temporarily cut off the sound. 3 SOUNDTRACK(GREEN) 13 MENU Press to display the soundtrack list for the current Press to display the Main Menu on the screen serv
Inhaltszusammenfassung zur Seite Nr. 6
Copyright & Glossary Copyright TM • VIACCESS is a trademark of France Telecom. • CryptoWorks(TM) is a trademark of Philips Electronics N.V. • Irdeto is a trademark of Mindport BV. • Nagravision is a registered trademark of Kudelski S.A. • Conax is a trademark of Telenor Conax AS. • “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Warning HUMAX cannot be held responsible for any kind of problems caused by the use of unofficial software. The use of software versions other th
Inhaltszusammenfassung zur Seite Nr. 7
Inhaltszusammenfassung zur Seite Nr. 8
STB Connections Rear Panel 1 RS-232C Use it when connecting to your PC. 2 TV SCART For the audio/video input of the TV. VCR SCART 3 For the VCR. 4 AUDIO/VIDEO OUTPUT Audio/video signal from your STB to VCR or TV. 5 ANTENNA Use to connect a CATV Antenna jacks to a ANTENNA input jack on the STB. 6 TV/VCR Use to connect a CATV signal from your STB to RF(ANT) input jack on your TV or VCR. 7 S/PDIF Output for connection to a digital amplifier. E6
Inhaltszusammenfassung zur Seite Nr. 9
There are several ways of connecting the STB to your existing Audio/TV system. We recommend using one of the following set-up for best results: TV only 1. Connect one end of 21-pin SCART cable to the TV SCART socket on the STB and the other end to a SCART socket on your TV. 2. If you want to use RCA/Cinch cable, connect one end of RCA/Cinch cable to the VIDEO socket on the STB and the other end to a Video Input socket on your TV. Connect two ends of RCA/Cinch stereo cable to the AUDIO R/L
Inhaltszusammenfassung zur Seite Nr. 10
Guide of Functions Information Box(I-Plate) The details of service part and event part are automatically displayed on the I-Plate when pressing the i button( ) or changing services. I-Plate is divided into service part and event part. SERVICE-PART(Left side of the box) SERVICE PART consists of the following items: • I-Plate icon, Current time and Dolby Digital symbol • Service name, Service number, icons • Subtitle, Teletext, Scrambling service symbol (These are automatically displa
Inhaltszusammenfassung zur Seite Nr. 11
Volume Control To adjust the volume level, use the buttons or buttons. To temporarily stop the volume, press the Mute( )button. To cancel mute, press the Mute( )button again or press the buttons or buttons. Soundtrack When you want to change the audio language of current service, press the Green( )button firstly. The on-screen menu is displayed on the top to left side of the screen. To change the audio language: 1. buttons : Use to select the au
Inhaltszusammenfassung zur Seite Nr. 12
Guide of Main Menu 1. Select Service The select service displays the required service list which can be viewed in Simple or Advanced mode. 2. TV Guide Your STB has an Electronic Programme Guide(EPG) to help you navigate through all the possible viewing options. The TV Guide supplies information such as programme listings and start and end times for all available services. In addition, detailed information about the programme listings and start and end times for all available services. In add
Inhaltszusammenfassung zur Seite Nr. 13
1. Select Service To select the desired in the service list, you should firstly display the service list using button. Use buttons to select a service and press button. Also use buttons to select a service directly in the service list. The contents of service list are as follows: Simple Service List 1. Use the buttons to select “Select Service” from the Main Menu and press the button. 2. Use the buttons to select “Simple” from the Main
Inhaltszusammenfassung zur Seite Nr. 14
Guide of Main Menu Service Favourite Service Favourite 1. Press the Green( ) button on the remote control unit to select the Favourite service list. Note : The groups are labeled in four different alphabet characters (A,B,C,D). 2. Use the buttons to select a favourite group that you want. 3. Press the Green( )button to toggle group and service list. Service Network 1. Press the Yellow( )button on the remote control unit to select the Network service list. 2. Use the
Inhaltszusammenfassung zur Seite Nr. 15
2. TV GUIDE You can watch a programme being shown and reserve it in the TV Guide mode. To enter the TV Guide mode Press the EPG( )button on the remote control unit or select the TV Guide on the Main Menu. To select the TV/Radio Guide Press the button on the remote control unit and TV Guide will be switched to the Radio Guide. TV Guide mode includes four different modes. To select each mode, use the following buttons: • Red ( )button : Use to display the current and next progr
Inhaltszusammenfassung zur Seite Nr. 16
Guide of Main Menu Reserved mode Shows the programme lists that you have already reserved on the TV Guide or Information box. Maximum eight programmes can be reserved. This programme list includes service name, date, duration time, reservation mode and event name. To cancel the Reserved service, select a programme you want to cancel using the buttons and then press the White( )button. Quick mode Shows a simple TV Guide like an Information box. This mode shows in the A/V playback
Inhaltszusammenfassung zur Seite Nr. 17
4. Installation This mode allows you to customise, add a new service and displays the state of the STB. Enter the submenus after selecting the Installation mode in the Main Menu. 4-1. System Setting The System Setting mode supports the STB internal settings according to the connection of the receiver and external units. This mode includes Language Setting, Time Setting, A/V Output Setting, UHF Tuning and Other Settings. Language Setting Select the language for menu, audio or subtitle. 1. Select
Inhaltszusammenfassung zur Seite Nr. 18
Guide of Main Menu Time Setting You can set the Current Time and Wakeup Time in this mode. Furthermore, the Service Number in the Wakeup mode and Sleep Time(standby mode) can be set. When a VCR is connected, recording can be automatically done according to Wakeup/Sleep Time Setting. Current Time To set the Current Time, enter the Offset value using the standardised information of current service area. The time setting will be used as the standardised time for the I-Plate, TV Guide, Wakeup an
Inhaltszusammenfassung zur Seite Nr. 19
A/V Output Setting Video Output(CVBS/S-Video/RGB) Set the video mode for the TV SCART output. Audio Output Set the audio mode which is output from the TV SCART and RCA/Cinch Jack. (Stereo/Mono) Dolby Digital lf Dolby Digital option is ON and the broadcaster provides the Dolby Digital stream, the Dolby Digital audio language is firstly selected when changing the service. Screen Mode Select the aspect ratio of TV which is connected to STB(4:3 or 16:9). Display Format Select the format which the
Inhaltszusammenfassung zur Seite Nr. 20
Guide of Main Menu Other Setting Select the OSD Transparency, Information Box Display Time and so on. OSD Transparency Select the OSD Transparent type. It affects Information box, Soundtrack, Subtitle, Service list, Time and Quick mode of TV Guide. Use the buttons to toggle transparent, opaque, 20%, 40%, 60% and 80%. Info. Box Display Time Set the display duration of Information box displayed on the screen after changing services. The time ranges from 0 to 20 seconds. Menu Background
