Bedienungsanleitung Extron electronic sHDSDI-ACR 100

Inhaltszusammenfassung zur Seite Nr. 1

User’s Guide
HDSDI-ACR 100
SDI-AVR 100
High Definition SDI to Component Video/RGB Converter
SDI to Video/RGB Converter
68-553-01 C
Printed in the USA
02 02

Inhaltszusammenfassung zur Seite Nr. 2

FORMAT 720P 1080I 1080P H - DSDI ACR 100 HDSDI TO VIDEO/RGB CONVERTER Installation Overview The Extron HDSDI-ACR 100 converts a high definition (HD) serial digital interface (SDI) input (SMPTE-292M) to either analog component or RGB video. The converter supports the 720p, 1080i, and 1080p HDTV rates. The 1080p rate is limited to a maximum 30 Hz refresh rate and includes 1080p segmented frame 23.94/24. DIP switches select between RGB and component video, and, for component video output, betwee

Inhaltszusammenfassung zur Seite Nr. 3

Installation IN R/R-Y G/Y B/B-Y RGB/Component (HDSDI-ACR 100) or RGB/YUV (SDI- COMPOSITE S-VIDEO OUTPUT OUTPUT AVR 100) switch — Set this switch to the Off position to 5 OUT HV S output RGB video. Set the switch on for component video. ON ON OFF OFF 100-240V 50/60 Hz 0.2A SDI INPUT OUTPUTS Bi/tri-level switch (HDSDI-ACR 100 only) — Set this switch to the On position to output tri-level sync on the 6 1 2 7 3 4 component video output. Set the switch off for bi-level sync. ON Figure 4 — S

Inhaltszusammenfassung zur Seite Nr. 4

Indicators and Specifications The equalization applied to the SDI-AVR 100’s input signal is FORMAT sufficient for an input coaxial cable length of at least 1000 feet (305 720P 1080I 1080P meters) of Extron SHR cable or Belden 8281 cable. HDSDI-ACR 100 HDSDI TO VIDEO/RGB CONVERTER The equalization applied to the HDSDI-ACR 100’s input signal is sufficient for an input coaxial cable length of at least 330 feet (100 1 2 3 4 meters) of Extron SHR cable or Belden 8281 cable. Figure 5 — HDSDI-ACR 100 f

Inhaltszusammenfassung zur Seite Nr. 5

Impedance .................................... 75 ohms Return loss .................................... -30dB @ 5 MHz Sync Output type .................................. RGBHV, RGBS, RGsB Standards (SDI-AVR 100 only) .. NTSC 3.58, PAL 4.43, Betacam Output impedance....................... 75 ohms Max. rise/fall time....................... 200 nS Polarity .......................................... SDI-AVR 100 ............ negative HDSDI-ACR 100 ...... bi-level or tri-level sync (switch selectable)