Inhaltszusammenfassung zur Seite Nr. 3
MODEL SERIAL NUMBER INSTALLED BY INSTALLATION CHECKED BY SERVICE CENTER NAME / NUMBER For service or information call: Customer Service at 800.90TURBO or +1 214-379-6000 Sales and Marketing at 866.90TURBO TM Accelerating the World of Cooking
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT SAFETY INFORMATION The information contained in this manual is important for the proper installation, use and maintenance of this oven. Adherence to these procedures and instructions is important for satisfactory baking results and long-term trouble-free service. Please read this manual carefully and retain it for future reference. Errors - descriptive, typographic or pictorial - are subject to correction. Specifications are subject to change without notice. WARNING: Improper installat
Inhaltszusammenfassung zur Seite Nr. 5
Table of Contents Introduction Important Safety Instructions 2 Precautions to Avoid Possible Exposure to Excessive Microwave Energy 3 Grounding Instructions 3 RF Interference Considerations 3 Oven Description and Specifications 4 Installation Ventilation Requirements 5 Delivery and Location 5 C3 Oven Assembly 6 Operation Glossary of Terms 9 The Control Pad 10 Power–Up 11 Cooking Instructions 11 Turning the Oven Off 12 Editing a Food Item 13 Enabling/Disabling the Edit Mode 14 Cooking Options -
Inhaltszusammenfassung zur Seite Nr. 6
2 INTRODUCTION Introduction TO THE TURBOCHEF C3 OVEN IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, the following basic safety precautions should be strictly adhered to so as to reduce the risk of burns, electric shock, fire, injury, or exposure to excessive microwave energy: o Read all instructions before using the appliance. o Read and follow the specific PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY found on page 3. o This appliance must be grounded. Co
Inhaltszusammenfassung zur Seite Nr. 7
INTRODUCTION 3 PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY To reduce the risk of exposure to excessive microwave energy: ox DO NOT attempt to operate this oven with the door open since open-door operation can result in harmful expo- sure to microwave energy. It is important not to defeat or tamper with the safety interlocks. ox DO NOT place any object between the oven front face and the door or allow soil or cleaner residue to accumulate on the sealing surfaces. ox DO NO
Inhaltszusammenfassung zur Seite Nr. 8
4 INTRODUCTION OVEN DESCRIPTION AND SPECIFICATIONS The C3 roasts, browns, and broils a wide variety of foods up to 10X faster and at a quality that meets or exceeds traditional cooking methods. Intense microwave energy combines with rapidly-recirculating hot air to cook food faster than conventional ovens without sacrificing product quality. The closed-loop airpath contains a catalytic converter that eliminates flavor transfer between foods and reduces airborne grease in the oven. Rapid-respons
Inhaltszusammenfassung zur Seite Nr. 9
INSTALLATION 5 Installation OF THE TURBOCHEF C3 OVEN Please follow the detailed instructions provided in this section regarding the assembly and installation of your C3 oven for enhanced safety and optimal oven functionality. INSTALLATION DELIVERY AND LOCATION The TurboChef C3 Oven is manufactured to comply Delivery - Initial Inspection with applicable CE, NSF, UL, cUL, FDA and FCC All TurboChef C3 ovens are shipped so as to prevent requirements. All equipment is designed and certified for damag
Inhaltszusammenfassung zur Seite Nr. 10
6 INSTALLATION WARNING:Death, injury and equipment damage CAUTION: Equipment damage may occur from may result from improper positioning. It is the improper installation of the ceramic platter. operator’s responsibility to ensure the oven is properly Install the ceramic platter with the rounded corners to positioned on countertop daily. TurboChef will not warrant rear of oven (the lip of the platter should face forward). any damage or injury to ovens that fall off countertops due to improper pl
Inhaltszusammenfassung zur Seite Nr. 11
INSTALLATION 7 Built-In Installation Installation Near Open Heat Source Figure 4. Figure 5, page 8. TurboChef ovens are designed to be installed on a When placing a TurboChef oven near an open countertop or table. They are not intended for heat source, strictly adhere to the following: built-in or enclosed installation. Verify oven location has a minimum 6" (152 mm) clearance on top and minimum 2" (51 “Built-in or enclosed installation” is defined as mm) of clearance on each side. installing an
Inhaltszusammenfassung zur Seite Nr. 12
8 INSTALLATION FIGURE 5: Installation Near Open Heat Source
Inhaltszusammenfassung zur Seite Nr. 13
OPERATION 9 Operation USING THE C3 AND ALL OF ITS FEATURES This section contains detailed information on how to power up your C3 oven, cooking and programming instructions, and operation tips. Read this information thoroughly and refer back to it as necessary. GLOSSARY OF TERMS Oven Operating Components DISPLAY The primary interface to relay messages to the operator. KEYPAD The primary interface for the operator to use the oven. COOK CAVITY Cavity in which food products are cooked. Product Recip
Inhaltszusammenfassung zur Seite Nr. 14
10 OPERATION 1 2 2 3 3 4 5 7 6 FIGURE 6: The Control Pad THE CONTROL PAD Figure 6. 4. Stop Key Press to stop cook cycles. 1. Display Window Displays operation and programming information. 5. Keypad Used to enter data in the programming mode and 2. Soft Keys manually input cooking times. Eight keys used to select options that are displayed adjacently on the screen. 6. Back Key Press to return to a previous screen. When the oven is 3. Arrow Keys idling between cook cycles, press to turn the oven o
Inhaltszusammenfassung zur Seite Nr. 15
OPERATION 11 POWER–UP 4. When the oven cooking temperature is within 7ºF (4.8ºC) of the cook cavity set point temperature, the The Initial Power On oven will display “Ready to Cook” and an audible When power is initially applied, the oven START UP alarm will sound. After approximately 1 second, the screen will display the firmware version and the oven’s MENU GROUP SELECT screen will appear. serial number for 5 seconds (Figure 7). The OFF screen will then display “Oven Off” in large text (Figure
Inhaltszusammenfassung zur Seite Nr. 16
12 OPERATION 2. The MENU ITEM SELECT screen is displayed with eight 6. If the DONE function is enabled, the display menu items, each associated with the eight soft keys. will provide two additional options (Figure 13): Press the soft key corresponding to the desired menu a. Save Time: Press this soft key to save an adjusted item (Figure 11). cook time. This option will appear only if the START screen is also enabled (page 14). 3. From the MENU ITEM SELECT screen, press the soft key b. Cook Mo
Inhaltszusammenfassung zur Seite Nr. 17
OPERATION 13 EDITING A FOOD ITEM b. Item Name - Same as “Group Name,” above. 1. From the COOLING DOWN or OFF mode, c. Cook Time - Enter the cook time using the simultaneously press the UP and DOWN keys. numeric keypad. 2. Enter the code “9” and press ENTER. d. Events 1 through 6 - Edit using the numeric keypad: o % Time - Each event is a percentage (0-100%) of NOTE: For instructions on changing the EDIT PIN the total cook time. The sum of all event percent- number, contact Customer Service at
Inhaltszusammenfassung zur Seite Nr. 18
14 OPERATION 9. Press the “Save” soft key to save the new settings. 3. When prompted, press “9” to enable the START screen. Doing so will permanently replace old item settings. Press any other numeric key to disable the START screen. 10.When done editing recipes, press the BACK key until The “Done” Screen returned to the COOLING DOWN or OVEN OFF screen. For more information about the DONE screen, see page 12. To enable/disable the DONE screen (Figure 18): ENABLING/DISABLING THE EDIT MODE 1. Fr
Inhaltszusammenfassung zur Seite Nr. 19
OPERATION 15 Loading a Menu from a Smart Card 2. Enable the SAVE MENU function: Please note that once the procedure below is completed, the a. Simultaneously press the UP and DOWN keys. old menu settings will be permanently lost. b. Enter the code 6-3-6-8 (M-E-N-U) and press ENTER. c. Press 9 to enable LOAD MENU. The oven will return 1. Ensure the oven is in the OVEN OFF/COOLING to OVEN OFF/COOLING DOWN. DOWN mode (page 12). d. Simultaneously press the UP and DOWN keys. e. Enter the code 7-2-8-
Inhaltszusammenfassung zur Seite Nr. 20
16 OPERATION OPERATING TIPS HANDLING TIPS How to Develop Cook Settings Do: o TurboChef ovens use both hot air and microwave energy Ensure the oven is cleaned daily. o to cook food. If you have experience with either a convec- Use only microwave-safe, specified C3 oven utensils tion oven or microwave oven, you will see similarities and (contact 800.90TURBO or +1 214-379-6000 to obtain significant differences. The key to creating good cook a price sheet of C3 oven accessories). o settings for you
Inhaltszusammenfassung zur Seite Nr. 1
C3 Owner’s Manual
FOR THE TURBOCHEF C3 SPEED COOK OVEN
TM
Accelerating the World of Cooking
800.90TURBO / +1 214-379-6000
Part Number: TC3-0209 / Revision E / May 2007
Inhaltszusammenfassung zur Seite Nr. 2
