Inhaltszusammenfassung zur Seite Nr. 1
B 89092-4
Built-in oven
GB IE
Instruction booklet
Inhaltszusammenfassung zur Seite Nr. 2
Important Safety Information You MUST read hese warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 08705 350350 Installation Take great care when heating fats and oils as they will ignite if they become too hot. • This oven must be installed by qualified personnel Always use oven gloves to remove and replace food to the relevant British Standards. in the oven. This oven is heavy. Take care when moving it. Ensure that al
Inhaltszusammenfassung zur Seite Nr. 3
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about r
Inhaltszusammenfassung zur Seite Nr. 4
Contents Important Safety Information ............................................................................................................ 2 Description of the appliance ...........................................................................................................................5 Control Panel .......................................................................................................................................................6 The Oven Safety Devices ......
Inhaltszusammenfassung zur Seite Nr. 5
Description of the appliance Control Panel Air Vents for Cooling Fan Grill Element Oven Light Oven Fan Rating Plate Oven accessories Grill/roasting pan Grill trivet Anti-tip shelf (x 2) Removable handles 5
Inhaltszusammenfassung zur Seite Nr. 6
Control Panel Cooking Duration Time Temperature End Of Cooking Time Cooking Functions Symbol display display display Symbol Minute Minder Clock Symbol Symbol Thermometer Symbol 12 3 4 5 6 7 General Features of The Oven The Oven Electronic Controls Electronic Control 1. ON / OFF Touch control The touch controls 2. Cooking Functions Touch Control All the oven functions are controlled by an 3. Recipe Selection Touch Control electronic device. You can select any combination of cooking function, coo
Inhaltszusammenfassung zur Seite Nr. 7
The Oven Safety Devices The Safety Thermostat The cooling fan The cooling fan operates during cooking. Air is This oven is provided with a safety thermostat. expelled through vents between the oven door In case of malfunctioning of the main thermostat, and the control panel. and consequential over-heating, the safety The cooling fan may run on after the oven is device will stop the power supply to the switched off to keep the controls cool. This is appliance. If this happens, call your local Se
Inhaltszusammenfassung zur Seite Nr. 8
2. If symbol stops flashing before you have had time to set the clock, touch the "Time Function Control" twice. The symbol starts flashing again. Then, proceed as described at point 1. To Select the Language You can choose the language to be used in the Oven Electronic Control display. The oven must be OFF when carrying out this operation. 1. Touch the "Cooking Function Control" and the "Recipe Selection Control" at the same time and keep them pressed for 2 seconds at least. The Electroni
Inhaltszusammenfassung zur Seite Nr. 9
Before the first use of the oven Remove all packaging, both inside and outside the oven, before using it. The oven will work only if the time of day has been set. To switch the oven on and off The oven must be switched on before setting any cooking function or programme. When control is touched, the oven light will switch on. The oven symbol and the message "LIGHT" appear on the display (Fig. 5). To switch off the oven, you can touch control Fig. 5 at any time. Any cooking function or program
Inhaltszusammenfassung zur Seite Nr. 10
5. Allow the oven to run empty for approximately 45 minutes. 6. Open a window for ventilation. This procedure should be repeated with the "Fan Cooking" function and the "Double Grill" function for approximately 5-10 minutes. Once this operation is carried out, let the oven cool down, then clean the oven cavity with a soft cloth soaked in warm water to which a little mild washing-up liquid has been added. Before cooking for the first time, carefully wash the oven accessories. To select a Cookin
Inhaltszusammenfassung zur Seite Nr. 11
5. When the required temperature is reached, an acoustic alarm will sound for a short time and the thermometer symbol will light permanently. To set the temperature and time Control and are used to adjust both the temperature and the time settings. Details about using them according to the different functions of the Oven Electronic Control are given in the following chapters. As a general rule, please note that: > Controls and are used to increase or decrease the temperature settings while
Inhaltszusammenfassung zur Seite Nr. 12
Cooking Functions The following list displays in sequence all the available cooking functions. Fan cooking – This setting allows you to 1 roast or roast and bake simultaneously using any shelf, without flavour transference. Pre-set temperature: 175°C Conventional cooking – The heat comes 2 from both the top and bottom element, ensuring even heating inside the oven. Pre-set temperature: 200°C Grill - It can be used for grilling small 3 quantities. Pre-set temperature: 250°C Thermal Grilling – Thi
Inhaltszusammenfassung zur Seite Nr. 13
Programming the Oven How to set the minute minder 1. Touch the "Time Function" control . The symbol flashes near the "Minute Minder" symbol and the time display shows "0.00" (Fig. 10). 2. Symbol will flash for 5 seconds. Within this time, touch control to select the required time (Fig. 11). Maximum time is 23 Fig. 10 hours 59 minutes. After another 5 seconds after you have set the time, the symbol stops flashing. This means that the setting has been stored in the Electronic Control memory
Inhaltszusammenfassung zur Seite Nr. 14
To programme the Oven to switch off 1. Switch the oven on, place food in the oven, select a cooking function and adjust the cooking temperature, if required. 2. Touch the "Time Function" control . The symbol flashes near the "Cooking Duration" symbol . The time display shows "0.00" at the left hand and the current time of day at the right hand (Fig. 12). 3. Symbol will flash for 5 seconds. Within this time, touch control to select the Fig. 12 required time. Maximum time is 23 hours 59 minu
Inhaltszusammenfassung zur Seite Nr. 15
To programme the Oven to switch on and off 1. Carry out the "Cooking Duration" setting as described at points 1 to 4 in the previous chapter. 2. Touch the "Time Function" control twice: the symbol flashes near the "End of Cooking Time" symbol (Fig. 14). 3. Within 5 seconds, touch control “ “ to select the required end of cooking time, which is shown at the right hand of the time Fig. 14 display (Fig. 15). 4. After another 5 seconds after you have set the time, the symbol stops flashing, the
Inhaltszusammenfassung zur Seite Nr. 16
Safety and Energy Saving Functions Safety Cut-Off Function The oven will switch off automatically if any change of setting is made, according to the table below (Fig. 16). If temperature setting is: the oven will switch off: Fig. 16 1 250°C after 1 /2 hours 1 from 200 up to 245°C after 5 /2 hours 1 from 120 up to 195°C after 8 /2 hours less than 120°C after 12 hours Child Safety Function To avoid children switching on the oven, it is possible to lock the oven controls. 1. If the oven is on,
Inhaltszusammenfassung zur Seite Nr. 17
"Fast Heat Up" function (Booster) After a cooking function has been selected and the temperature has been adjusted, the cavity will gradually heat up until the selected temperature is reached. This will take from 10 to 15 minutes, depending on selected function and temperature. If it is necessary to reach the required temperature in a shorter time, the fast heat up function can be used. 1. Switch the oven on by touching the "ON/ OFF" control . 2. Set the required cooking function and temperatur
Inhaltszusammenfassung zur Seite Nr. 18
Residual Heat Function When a Cooking Duration time is set, the heating elements of the oven will automatically go off a few minutes before the end of the programmed time, and the oven will use the residual heat to finish your dishes without energy consumption. All current settings will be displayed until the Cooking Duration time is over. This function will not operate when the Cooking Duration time is less than 15 minutes. "Demo" mode This mode is intended to be used in the shops to demonstra
Inhaltszusammenfassung zur Seite Nr. 19
"Beep" Mode You can choose to make The Electronic Control beep each time that a control is touched. To enable this function, the oven must be off. 1. Press controls and at the same time for about 3 seconds. The Electronic Control beeps once (Fig. 22). To disable the "Beep" Function: 1. If the oven is on, touch control to switch it off. Fig. 22 2. Press controls and at the same time for about 3 seconds. The Electronic Control beeps once Error code The Oven Electronic Control does a continuo
Inhaltszusammenfassung zur Seite Nr. 20
3. Symbol " " flashing means that it is possible to adjust the pre-set temperature by touching control or . Temperature level is adjusted in 5 degree steps. Please note that symbol " " will flash for 5 seconds. 4. When 5 seconds elapse, symbol " " will go out showing that the temperature level has been stored in the Electronic Control memory. The thermometer symbol rises slowly , indicating the degree to which the oven is currently heated. The upper section of the display will now show the coo
