Inhaltszusammenfassung zur Seite Nr. 13
Chapter 1 Getting Started To charge the device using the docking station: 1. Plug the AC adapter cable into the power jack on the docking station. 2. Plug the AC adapter into an electrical outlet. 3. Slide the device into the docking station until it clicks into place. The connection is secure when the bottom edge of the device is aligned smoothly with the docking station, and the LED indicator on the docking station and device lights up red. LED status during charging: – Solid red: Charg
Inhaltszusammenfassung zur Seite Nr. 14
Powering On the PA500 After you have initially charged your device for about 16 hours, the device is ready to be used. You can now start up your device where you can calibrate the screen, set up the system time zone, and learn some basic stylus usage. 1. Turn on your device by pressing the Power button on the front panel. NOTE: The PA500 screen ships with a protective plastic film. You may remove it by peeling from one corner. The screen will be more susceptible to scratching without the
Inhaltszusammenfassung zur Seite Nr. 15
Chapter 2 Using the Hardware Using the Keypad The PA500 keypad has a navigation key and six special keys to launch particular applications and display the on-screen keyboard. No. Component Icon Description Software keyboard Press to launch the on-screen keyboard. 1. button Notes button Press to open Notes. Notes allows you to quickly record 2. information, reminders, ideas, drawings, and phone numbers. You can create a written note or include a recording in a note. Enter button Press the E
Inhaltszusammenfassung zur Seite Nr. 16
Using the Stylus CAUTION! Never use anything other than PA500 stylus on the screen, otherwise this could cause a permanent damage. 1. Push the stylus in the direction of the arrow, then pull out to remove the stylus from its holder. 2. Hold the stylus like holding a pencil. 3. To make a choice from a menu, lightly tap the tip of the stylus on that choice. 4. To write data into a field on a form, use the stylus to print the letters or numbers(of on-screen keyboard). Use very light pressure.
Inhaltszusammenfassung zur Seite Nr. 17
Chapter 2 Using the Hardware Using the SDIO/MMC Slot Your device has an expansion slot compatible with a range of SD, SDIO, and MMC storage cards, which are primarily used to back up or transfer files and data. To insert a storage card: 1. Hold the device securely, then lift the rubber cover from the SDIO/MMC slot . 2. Push the card into the slot until you feel the SD card click into place, this will signal that the card is already properly seated in the slot. The card is secure when it i
Inhaltszusammenfassung zur Seite Nr. 18
Using the Laser Scanner PA500 has an integrated laser scanner which reads all major barcode labels with excellent performance. NOTE: The reading software must be enabled in order to operate the scanner. This can be a user-loaded application or a pre-loaded utility such as Scanner Settings or Scan2Key. To scan a barcode: 1. Launch the Scanner Settings application. a. Tap Start → Settings. b. On the System tab, tap Scanner Settings. In the Scanner Control Panel screen, you can configure barc
Inhaltszusammenfassung zur Seite Nr. 19
Chapter 2 Using the Hardware d. Tap the Test tab. 2. Press either one of the scanner trigger keys on the device. 3. Aim the laser scanner at the selected barcode and press both trigger keys to scan. The scanned barcode data appears on the screen. 4. On the Scanner Control Panel screen, tap ok to exit 13
Inhaltszusammenfassung zur Seite Nr. 20
Command Interface The following section explains the PA500 command interface. Today Screen When you turn on your device for the first time each day or after a preset period of inactivity, you’ll see the Today screen.It provides an at-a-glance view of the important reminders and details. To display the Today screen: When viewing another screen, you can do either of the following: � Tap Start → Today. � Press the Today button on the device’s front panel. 14 Copyright 2007 unitech Electronics
Inhaltszusammenfassung zur Seite Nr. 1
unitech
PA500 Enterprise PDA
User’s Manual
Rev. C
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Preface About This Manual This manual explains how to install, operate and maintain the PA500 Enterprise PDA. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from the manufacturer. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. © Copyright 2007 unitech Electro
Inhaltszusammenfassung zur Seite Nr. 4
Storage and Safety Notice Although charged Lithium-Ion batteries may be left unused for several months, their capacity may be depleted due to build up of internal resistance. If this happens, they will require recharging before they are used. Lithium-Ion batteries may be stored at temperatures between -20°C to 60°C, however they may be depleted more rapidly at the high end of this range. It is recommended to store batteries within the normal room temperature. RoHS Statement This device confo
Inhaltszusammenfassung zur Seite Nr. 5
Table of Contents Table of Contents Preface About This Manual iii BatteryNotices ...................................................................................................................... iii Battery Charge Notice ............................................................................................................ iii Storage and Safety Notice...................................................................................................... iv RoHS Statement.............
Inhaltszusammenfassung zur Seite Nr. 6
Using ActiveSync .............................................................................................................. 24 Synchronizing Information with Your Computer ................................................................... 24 Using ActiveSync to Exchange Files .................................................................................... 26 Synchronization Options....................................................................................................... 27
Inhaltszusammenfassung zur Seite Nr. 7
Chapter 1 Getting Started Introducing the PA500 Thank you for purchasing the PA500 Enterprise PDA. Your PA500 was designed for users who need a compact and durable portable computer for data collection and real time transactions. Ultra-rugged Design The unitech PA500 Enterprise PDA is a compact mobile computing device designed for maximum durability. Easy to Use The unit is equipped with a color display with touch screen, a five-way directional key, and six application keys. The PA500 sup
Inhaltszusammenfassung zur Seite Nr. 8
Package Contents After opening the box, ensure the following accessories for the PA500 are present: PA500 Terminal Power Adapter* Battery Pack Earphone Stylus USB charging cable Stylus with bungee lanyard USB docking station Leather case (optional) (optional) (optional) CD-ROM Quick Reference Guide * The adapter’s replaceable clip plugs is available, depends on the region. If anything is missing or appears damaged, contact your dealer. 2 Copyright 2007 unitech Electronics Co., Ltd. All right
Inhaltszusammenfassung zur Seite Nr. 9
Chapter 1 Getting Started A Tour of the PA500 The following sections describe the main components and features of the PA500. Front View No. Component Description Barcode laser scanner Reads and captures information on a barcode label. 1. (optional) Status indicator Indicates the battery charging and barcode scanning status. 2. � Green - Battery is fully charged, the device is running on battery power, or barcode scanning process is completed without error. � Red - Battery is charging, barc
Inhaltszusammenfassung zur Seite Nr. 10
Back View No. Component Description Speaker When speaker phone is active, 10. sounds are emitted here. Battery release latch Slide toward the right side of the device and hold firmly, 11. then detach the battery from its bay. Reset button Press the end of the stylus into the button to reset your 12. device. Main battery Removable and rechargeable 3.7 V, 2200 mAh battery 13. pack. Universal connector Connects your device to a USB charging cable, whi
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 1 Getting Started Setting up the PA500 Perform the following set up tasks to begin using your device: � Install the battery pack � Charge your device � Power on the PA500 Installing the Battery WARNING!There is a risk of fire and burns if the battery pack is handled improperly. DO NOT disassemble, crush, puncture, short external contacts, or dispose the battery pack in fire or water. DO NOT attempt to open or service the battery pack. Dispose of used batteries according to the loca
Inhaltszusammenfassung zur Seite Nr. 12
Charging the PA500 For initial use, you need to charge your device for about 16 hours. After that, you can charge it everyday to recharge the battery to full capacity. You can charge your device using the USB charging cable or the docking station. CAUTION! Operating the PA500 for the first time without the AC adapter, and without fully charging the backup battery may result in loss of data stored in RAM memory. NOTE: Data you entered may not be properly stored until the internal backup batt
