Inhaltszusammenfassung zur Seite Nr. 1
Mobile Video HDD
User Manual
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Contents Introduction 1 About the Remote Controller 2 Parts Name and Functions 3 How to Use the Mobile Video HDD 4 Using the AV Playback Function 5 Connecting to AV Equipment 5 Power Connection 6 Activating the Mobile Video HDD for AV Playback 7 Selecting the Media Files for Playback 7 Introduction and Playback of the Media Files 10 Operations while Playing Back 12 Function Setup 17 PC Operation 21 Software Installation 21 Connecting to PC 22 Disconnecting from PC 23
Inhaltszusammenfassung zur Seite Nr. 4
Inhaltszusammenfassung zur Seite Nr. 5
Introduction Features The Mobile Video HDD was specially designed as a dual-use hard disk drive. When attached to a PC, it operates as a Hi-speed USB 2.0 (or IEEE 1394 external hard disk drive), with a large capacity of disk storage. When attached to an AV device, the Mobile Video HDD lets you browse and playback your entire media library directly to your TV or Home Theater! The Mobile Video HDD can play back Mpeg1 (VCD), Mpeg2 (DVD) movie files, MP3 music files, Jpeg photo and grap
Inhaltszusammenfassung zur Seite Nr. 6
About the Remote Controller How to take and store the remote controller This device is designed with a remote control storage compartment on the bottom. If not in use, have the remote control stored to the compartment to avoid misplacing. Take out the Remote Cntroller Store the Remote Controller : Push the bottom of remote forward. : With the buttons toward up, insert the top of remote and push it forward. : The remote will be released from the stand. : Push the bottom of remo
Inhaltszusammenfassung zur Seite Nr. 7
Parts Name and Functions ⑪ Remote receiver : When using the remote, point the remote here. Remote indicator (Red) : Blinks 1 time: Received the remote signal. Blinks 3 times: Cannot use media player function, check and make sure the unit is not connected to a PC. No reaction after pressing remote: See [Appendix] – [Troubleshooting] Power and access Lights up: The power is on. indicator (Blue) : Blinking: Accessing the data through PC con
Inhaltszusammenfassung zur Seite Nr. 8
How to Use the Mobile Video HDD Besides being used as a high-speed external hard disk drive to store or access files, this device can also connect to your video equipment to playback all kinds of audio/video file formats. Please read the following sections according to your application. Using as an External Hard Disk for PC Please refer to the following chapters in sequence : Installation software Connecting to PC Access data P-21 P-22 Using as a Media Player The
Inhaltszusammenfassung zur Seite Nr. 9
Using the AV Playback Function Connecting to AV Equipment Using Composite Video Output The composite video is the most popular video output method. Most TV sets and AV receivers support this kind of connection. White Fig. 1 Yellow Red INPUT Using Component Video Output (Y/Pb/Pr) Component video output provides higher picture quality. If your TV supports Progressive Scan (Y/Pb/Pr), you can enable it by selecting “Video Output” on the “Image Setup” menu and then selecti
Inhaltszusammenfassung zur Seite Nr. 10
Using the AV Playback Function Using Composite Stereo Audio Output To output the stereo audio signal, refer to Fig. 1, connect this connector to TV or AV amplifier (receiver). Using Coaxial Output Digital Audio To output the digital audio signal, connect this connector to an AV amplifier (receiver) which equips a Dolby Digital decoder. You will get the multi-channel sound effect. The Coaxial cable is not provided INPUT Power Connection 1. Connect the plug of
Inhaltszusammenfassung zur Seite Nr. 11
Using the AV Playback Function Activating the Mobile Video HDD for AV Playback 1. Turn on your TV and AV receiver, and switch to the correct input channel. 2. Make sure the Mobile Video HDD is turned on (blue LED lights up) and press (STANDBY) button to activate this unit. If this unit is not turned on, press the Power button to turn it on. 3. Now you can use the remote to operate this unit for playback. 4. After playback, press to go back to standby mode; you don’t need to power of
Inhaltszusammenfassung zur Seite Nr. 12
Using the AV Playback Function Operation of “File NAVI” List the folders and media files for selection and playback Selection Press button to select a folder or file. You can also press 0~9 buttons to select the number of the target file. If the selected file is playable, it will be play back. (The files in the “ROOT” folder cannot be selected by pressing 0~9 buttons) Playback Press the PLAY button when a folder is selected. If this folder doesn’t contain any playable AV f
Inhaltszusammenfassung zur Seite Nr. 13
Using the AV Playback Function Icon Descriptions : Indicates this is a folder : Indicates this file is the “VIDEO_TS.IFO” of the DVD movie. To play back a full function of a DVD movie, you must play this file. : Indicates this is the Mpeg1 (VCD) file. The filename extensions are dat, mpeg. : Indicates this is the DivX /XviD movie file. : Indicates this is the DivX /XviD subtitle file. : Indicates this is the Mpeg2 file. The filename extensions are mpg, vob, m2p. : Indi
Inhaltszusammenfassung zur Seite Nr. 14
Using the AV Playback Function Hiding Private Folders 1. On “File NAVI” screen, press the TITLE button to go back to “ROOT” folder. 2. Use 0~9 buttons to enter 4 digits of an incorrect password. 3. If the password is incorrect, the private folders will disappear immediately. 4. You can also press button to go back to standby mode. The private folders will be hidden when activating this unit next time. Introduction and Playback of the Media Files DVD on HDD IFO files Movie1 VO
Inhaltszusammenfassung zur Seite Nr. 15
Using the AV Playback Function VCD and Mpeg1 Files The files that meet the Mpeg1 format Movie3 This kind of media file includes all files that meet the Mpeg1 format (the filename extensions are dat, mpe, mpeg). To play, select a file or a folder which contains the files, and then press PLAY. Mpeg2 Files The files that meet the Mpeg2 format Movie4 This kind of media file includes all files that meet the Mpeg2 format (the filename extensions are mpg, vob, m2p). To play, select
Inhaltszusammenfassung zur Seite Nr. 16
Using the AV Playback Function Operations while Playing Back While playing back, you can take enable following operations : [ The icons on the top of table indicate the available media files ] Stop Playback Stops the playback and goes back to “File NAVI” Stop Press button, stops the playback and goes back to “File NAVI”. After stop the playback of and , you can do the following: Resume After stopping, if you never play another file and the current file is still selected,
Inhaltszusammenfassung zur Seite Nr. 17
Using the AV Playback Function Fast Forward Fast rewind Fast forward: quickly plays the file forward (the speed can be changed). Rewind: quickly plays the file backward (the speed can be changed). Fast forward Press button to change the speed. Rewind Press button to change the speed. Resume Press PLAY button goes back to normal speed. : Change the speed in sequence: [2X 4X 6X 8X Normal]. : Change the speed in sequence: [2X 4X 8X 16X Normal]. During the fast f
Inhaltszusammenfassung zur Seite Nr. 18
Using the AV Playback Function Skip Playback Skip forward or backward for a segment, and then play. Skip forward Press button. Skip backward Press button. Repeat Playback Shuffle Playback Repeat Playback: repeat plays the current file. Shuffle Repeat: randomly play all files in the current folder. Change mode Press REPEAT button to change the mode in sequence : “REPEAT ONE” (repeat the current) “REPEAT ALL” (repeat all files in the folder) “SHUFFLE REPEAT” (random
Inhaltszusammenfassung zur Seite Nr. 19
Using the AV Playback Function Time Searching Enter the time desired to play the movie. Display Press SEARCH 2 times, the screen displays _ _ : _ _ : _ _ (hh:mm:ss). Input Press 0~9 or buttons to input the desired value. Play Press PLAY, the movie will be played at the indicated time. The entered value must be within the length of the movie, or the will appear to indicates it has an error. Change Subtitle Change the subtitle, or disable the subtitle. Change sub
Inhaltszusammenfassung zur Seite Nr. 20
Using the AV Playback Function Change View Angle While playing a movie which contains multi view angles, you can change it. Change angle Press ANGLE button. Zoom In Enlarge the image. Zoom in Press ZOOM button to enlarge the image. Move If the image is larger than the screen, press to move it. Resume Press ZOOM again will resume back to normal size. After enlarging a photo, a “Zoom ON” message appears, you can: (DivX is not available for this function) Press button to
