Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK Technologies Co., Ltd. Copyright © 2005 TP-LINK Technologies Co.,
Inhaltszusammenfassung zur Seite Nr. 3
Package contents.............................................................................................................. 1 Chapter 1: About this Guide.............................................................................................. 2 1.1 Purposes.............................................................................................................. 2 1.2 Conventions......................................................................................................
Inhaltszusammenfassung zur Seite Nr. 4
5.9.1 Oray.net DDNS........................................................................................ 36 5.9.2 Comexe.cn DDNS.................................................................................... 36 5.10 System Tools.................................................................................................... 37 5.10.1 Time....................................................................................................... 38 5.10.2 Firmware.......................
Inhaltszusammenfassung zur Seite Nr. 5
TL-R460 Cable/DSL Router User Guide Package contents The following contents should be found in your box: One TL-R460 Cable/DSL Router One AC power Adapter for TL-R460 Cable/DSL Router Quick Installation Guide One Resource CD for TL-R460 Cable/DSL Router, including: • This Guide • Other Helpful Information Wall-mounting screws Note: If any of the listed contents are damaged or missing, please contact the retailer from whom you purchased the TL-R460 Cable/DSL Router for assista
Inhaltszusammenfassung zur Seite Nr. 6
TL-R460 Cable/DSL Router User Guide Chapter 1: About this Guide Thank you for choosing the TL-R460 Cable/DSL Router. This router provides dedicated solutions for Small Office/Home Office (SOHO) networks. With your network all connected, your local network can share Internet access, files and fun for multiple PCs through one ISP account. It is an easy, web-based setup for installation and management. Even though you may not be familiar with the router, this guide will make configurin
Inhaltszusammenfassung zur Seite Nr. 7
TL-R460 Cable/DSL Router User Guide Chapter 2: Introduction 2.1 Overview of the Router The TL-R460 Cable/DSL Router integrates a 4-port switch, firewall, and NAT-router. Its design is dedicated to Small Office/Home Office (SOHO) network solutions. The TL-R460 Cable/DSL Router will allow you to connect your network better than ever, sharing Internet Access, files and fun, easily and securely. The TL-R460 Cable/DSL Router provides flexible access control so that parents or network admi
Inhaltszusammenfassung zur Seite Nr. 8
TL-R460 Cable/DSL Router User Guide indicate connections. Viewed from left to right. Table 2-1 describes the LEDs on the front panel of the router. M1 Link/Act M2 100M Figure 2-1: Front Panel sketch Name Action Description Not lit The router works properly M1 M1 and M2 are flashing, Lit up The router has a hardware error synchronously, the router is Not lit The router has a hardware error restoring the factory default M2 Lit up The router has a hardware error settings. Flashing Th
Inhaltszusammenfassung zur Seite Nr. 9
TL-R460 Cable/DSL Router User Guide Chapter 3: Connecting the Router 3.1 System Requirements Broadband Internet Access Service (DSL/Cable/Ethernet) One DSL/Cable modem that has an RJ45 connector (It’s not necessary if you connect the router to Ethernet) Each PC on the LAN needs a working Ethernet Adapter and an Ethernet cable with RJ45 connectors TCP/IP protocol must be installed on each PC Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 o
Inhaltszusammenfassung zur Seite Nr. 10
TL-R460 Cable/DSL Router User Guide WAN 1 234 RESET To WAN To LAN Switch/Hub （） XDSL、、 Cable Ethernet Figure 3-1 Hardware Installation of the TL-R460 Cable/DSL Router - 6 -
Inhaltszusammenfassung zur Seite Nr. 11
TL-R460 Cable/DSL Router User Guide Chapter 4: Quick Installation Guide After connecting the TL-R460 router into your network, you should configure it. This chapter describes how to configure the basic functions of your TL-R460 Cable/DSL Router. These procedures only take you a few minutes. You can access the Internet via the router immediately after it has been successfully configured. 4.1 TCP/IP configuration The default IP address of the TL-R460 Cable/DSL Router is 192.168.1.1, and
Inhaltszusammenfassung zur Seite Nr. 12
TL-R460 Cable/DSL Router User Guide your PC and the router has been established. Figure 4-2 Failed result of Ping command If the result displayed is similar to what shown in figure 4-2, it means that your PC has not connected to the router. If so, refer to the following steps for a solution. 1. Is the connection between your PC and the router correct? Note: The Link/Act LEDs of LAN port on the router and LEDs on your PC's adapter should be lit. 2. Is the TCP/IP configuration for yo
Inhaltszusammenfassung zur Seite Nr. 13
TL-R460 Cable/DSL Router User Guide Note: If the above screen does not prompt, it means that your web-browser has been set to a proxy. Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it. If the User Name and Password are correct, you can configure the router using the web browser. Please click the Quick Setup link on the left of the main menu and the Quick Setup screen will appear. Figure 4
Inhaltszusammenfassung zur Seite Nr. 14
TL-R460 Cable/DSL Router User Guide ISP. These fields are case sensitive. If you have difficulty with this process, please contact your ISP. If you choose " Dynamic IP", the router will automatically receive the IP parameters from your ISP without needing to enter any parameters. If you Choose "Static IP", the Static IP settings page will appear, shown in figure 4-8: Figure 4-8 Quick Setup - Static IP Note: The IP parameters should have been provided by your ISP. IP Address - Thi
Inhaltszusammenfassung zur Seite Nr. 15
TL-R460 Cable/DSL Router User Guide Chapter 5: Configuring the Router This chapter describes each web page's key functions. 5.1 login After your successful login, you can configure and manage the router. There are nine main menus on the left of the web-based utility. Submenus will be available after you click one of the main menus. The nine main menus are: Status, Quick Setup, Network, DHCP, Forwarding, Security, Static Routing, DDNS and System Tools. On the right of the web-based u
Inhaltszusammenfassung zur Seite Nr. 16
TL-R460 Cable/DSL Router User Guide Figure 5-1 Router Status 5.3 Quick Setup Please refer to Section 4.2: "Quick Installation Guide." 5.4 Network Figure 5-2 the Network menu There are three submenus under the Network menu (shown in figure 5-2): LAN, WAN and MAC Clone. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 5.4.1 LAN You can configure the IP parameters of the LAN on this pag
Inhaltszusammenfassung zur Seite Nr. 17
TL-R460 Cable/DSL Router User Guide MAC Address - The physical address of the router, as seen from the LAN. The value can't be changed. IP Address - Enter the IP address of your router in dotted-decimal notation (factory default: 192.168.1.1). Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. Note: a. If you change the IP address of the LAN, you must use the new IP address to login to the router. b. If the new
Inhaltszusammenfassung zur Seite Nr. 18
TL-R460 Cable/DSL Router User Guide This page displays the WAN IP parameters assigned dynamically by your ISP, including IP address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP parameters from your ISP. Click the Release button to release the IP parameters. MTU Size: The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs you need to reduce the MTU. But this is rarely required, and should not be done unless y
Inhaltszusammenfassung zur Seite Nr. 19
TL-R460 Cable/DSL Router User Guide Figure 5-5 WAN - Static IP You should type the following parameters into the spaces provided: IP Address - Enter the IP address in dotted-decimal notation provided by your ISP. Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0. Default Gateway: (Optional) Enter the gateway IP address in dotted-decimal notation provided by your ISP. MTU Size - The normal MTU (Maximum Transmission Unit)
Inhaltszusammenfassung zur Seite Nr. 20
TL-R460 Cable/DSL Router User Guide Click Logout to end 802.1x authentication. 3. If you choose PPPoE, you should enter the following parameters (figure 5-6): Figure 5-6 WAN - PPPoE User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated d
