Inhaltszusammenfassung zur Seite Nr. 1
BROADBAND ROUTER
4 Port 10/100 Mbits/sec DSL/Cable router
BR4100DC
Instruction Guide
* Actual product may vary from photo
The Professionals’ Source For Hard-to-Find Computer Parts
Inhaltszusammenfassung zur Seite Nr. 2
FCC COMPLIANCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
Inhaltszusammenfassung zur Seite Nr. 3
1 Table of Contents Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Minimum Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Contents . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
2 Chapter 5: Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Configuration Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Appendix A: IP Configur
Inhaltszusammenfassung zur Seite Nr. 5
3 Chapter 1: Introduction Thank you for purchasing a StarTech.com four-port Ethernet broadband router. Now you can configure multiple users to share one high-speed xDSL or cable Internet connection. With 20 Mbits/sec LAN-to-WAN throughput and the ability to add hubs or switches to expand your network, this router is ideal for small or home offices (SOHOs) or medium- sized businesses. Features • Allows multiple users to share a single Internet line • Supports up to 253 users (through switches and
Inhaltszusammenfassung zur Seite Nr. 6
4 Contents This package should contain: • 1 x four-port Ethernet broadband router unit • 1 x straight-through UTP cable • 1 x power adapter • Wall-mount accessories Router Basics Back Panel The back panel is divided into three sections: LAN, WAN, and Reset. • The four Local Area Network (LAN) ports are where you connect your LAN computers, print servers, hubs/switches, etc. • The Wide Area Network (WAN) ports are where you connect your cable/xDSL modem. You will only use one WAN port at a time.
Inhaltszusammenfassung zur Seite Nr. 7
5 The Front Panel The front panel LEDs are your best indication of the router’s activities. LED Status Description PWR On Router has power Off Router has no power WAN 10/100M On WAN port is connected at 100Mbits/sec Off WAN port is connected at 10Mbits/sec WAN LNK/ACT On WAN port is connected Off WAN port has no connection Flashing WAN port has activity, data being sent LAN 10/100M On LAN port is connected at 100Mbits/sec Off LAN port is connected at 10Mbits/sec LAN LNK/ACT On LAN port is connec
Inhaltszusammenfassung zur Seite Nr. 8
6 Getting Started NOTE: The information in the following section as well as the information in Chapter 2: Quick Setup is covered on the Quick Installation Guide that accompanies this manual. If you have already performed the steps in the Quick Installation Guide, you can proceed to Chapter 3: General Settings. Setting Up Your LAN Sample Network 1. Make sure all network devices are turned off. 2. Plug the power adapter into the 12VDC port on the back of the router. Plug the other end into an ava
Inhaltszusammenfassung zur Seite Nr. 9
7 Configuring Your PCs Each of your LAN PC clients must be set up to obtain IP addresses automatically. If you are running an OS that is different than those listed below, please consult your OS manufacturer for details. Windows XP a. From your Control Panel, double-click the Network Connections icon. b. Right-click on “Local Area Connection” and select Properties. c. Select “Internet Protocol [TCP/IP]” and click the Properties button. d. Select “Obtain an IP address automatically” and “Obtain D
Inhaltszusammenfassung zur Seite Nr. 10
8 f. Check each of the tabs and verify the following settings: • Bindings: Check “Client for Microsoft Networks” and “File and printer sharing for Microsoft Networks” • Gateway: All fields are blank • DNS Configuration: Select “Disable DNS” • WINS Configuration: Select “Disable WINS Resolution” • IP Address: Select “Obtain IP address automatically” g. Reboot your PC. Your PC will now obtain an IP address automatically from your router’s DHCP server. WinNT a. Go to your Control Panel and doubl
Inhaltszusammenfassung zur Seite Nr. 11
9 Accessing the Router Home Page Once your PCs have been properly configured, the router’s DHCP server will automatically provide your LAN clients with an IP address. NOTE: Please make sure that the DHCP server on the router is the only DHCP server available on your LAN. If necessary, you can turn off the router’s DHCP server. See LAN on page 25 for details. 1. On one of your connected PCs, open your web browser. In the address field, enter the router’s default IP address (192.168.2.1) and pre
Inhaltszusammenfassung zur Seite Nr. 12
10 Navigate the Router Management Interface To leave the router’s web-based management interface, use the Logout button at the top right of the screen. You can also use this shortcut bar to move between pages when configuring the router. When applicable, you can click on the question icon that appears to the right of the page heading for a further definition or description of the information on the page.
Inhaltszusammenfassung zur Seite Nr. 13
11 Chapter 2: Quick Setup The Quick Setup feature will allow you to start sharing your Internet connection as quickly as possible. Advanced features such as passwords or firewalls can not be configured through Quick Setup. BEFORE YOU BEGIN: Make sure that you know what type of Internet connection your ISP uses: Cable Modem, Fixed-IP xDSL, Point-To-Point Protocol over Ethernet (PPPoE), or Point-to-Point Tunneling Protocol (PPTP). Then see Broadband Type on page 12 to find out the information tha
Inhaltszusammenfassung zur Seite Nr. 14
12 Broadband Type The Broadband Type page requires you to select the method your ISP uses to connect you to the Internet. For tips on where to find the information required by the router, see Appendix A. If you are unsure of what type of connection you are using or of where to find any of the information required by the router, contact your ISP. Select your connection type and proceed to the appropriate IP Address Info page.
Inhaltszusammenfassung zur Seite Nr. 15
13 Cable Modem If you are using a cable modem, your ISP will automatically provide you with an IP address. Some ISPs may require that you fill in additional information, such as the Host Name and MAC Address. If your ISP does not require this information, click OK to complete the configuration. Parameter Description Host Name Enter the Host Name (if required). MAC Address Your ISP may be expecting the MAC address of the adapter you were using when you initially signed up with them. You can us
Inhaltszusammenfassung zur Seite Nr. 16
14 Fixed-IP xDSL If you are using a Fixed-IP xDSL connection, your ISP has provided you with a specific IP address for you to use. Your ISP can provide all the information required in this section. Parameter Description IP Enter your IP address. Gateway IP Enter your ISP’s gateway IP address. DNS Enter your ISP’s DNS (Domain Name System) server IP address. Subnet Mask Enter the subnet mask provided by your ISP. When you are satisfied with your IP address settings, click the OK button. Congratu
Inhaltszusammenfassung zur Seite Nr. 17
15 PPPoE If your ISP uses the Point-to-Point over Ethernet (PPPoE) protocol to connect you to the Internet, you will be required to fill in the information below. Parameter Description User Name Enter your user name. Password Enter your password. Please retype your password Enter your password again for confirmation. Service Name Enter the service name (if required). MTU As an option, you can specify the maximum size of your transmission packet to the Internet. Leave this field blank if you do
Inhaltszusammenfassung zur Seite Nr. 18
16 PPTP If your ISP uses the Point-to-Point Tunneling Protocol (PPTP) to connect to the Internet, you will be required to fill in the information below. Parameter Description IP Address Enter your IP address. Subnet Mask Enter the subnet mask. Default Gateway Enter the IP address of the ISP Gateway. User ID Enter your User ID (also known as a connection ID). Password Enter your password. PPTP Gateway If your LAN has a PPTP gateway, enter the gateway IP address here. Idle Time Out As an option, y
Inhaltszusammenfassung zur Seite Nr. 19
17 Chapter 3: General Settings The General Setup section contains advanced features that allow you to configure your router to meet your network’s needs. From here you can: assign passwords, set up remote management access, configure your LAN and WAN settings, or set up a firewall, DMZ, or many other functions. Remember, if you have already used the Quick Setup Wizard, you do not need to alter any of the General Settings in order to share the Internet. From the router homepage, click on General
Inhaltszusammenfassung zur Seite Nr. 20
18 System The system screen allows you to specify a time zone, change the system password, and specify a remote management user for the router. Time Zone The time zone screen lets you specify the time zone you are in, as well as choose if and when you want daylight savings enabled. To change the time zone, follow the procedure outlined in Quick Setup on page 11.
