Inhaltszusammenfassung zur Seite Nr. 1
SIEMENS ADSL E-110/E-110-I
ETH & USB ComboRouter
User Manual
Rev:01_040220
2004-02-20
No part of this publication may be reproduced in any form by any means without the prior written
permission from Siemens Switzerland Ltd
Inhaltszusammenfassung zur Seite Nr. 2
SIEMENS ADSL E-110_E-110-I user manual Safety Notes For Installation • Use only the type of power source indicated on the marking labels. • Use only the power adapter supplied with the product. • Do not overload wall outlet or extension cables as this may increase the risk of electric shock or fire. If the power cable is frayed, replace it with a new one. • Proper ventilation is necessary to prevent the product overheating. Do not block or cover the slots and openings on the device, whic
Inhaltszusammenfassung zur Seite Nr. 3
Contents Content Safety Notes................................................................................................................................. i Safety Notes................................................................................................................................ ii For Installation.................................................................................................................... ii For Using ..........................................
Inhaltszusammenfassung zur Seite Nr. 4
SIEMENS ADSL E-110_E-110-I user manual Advanced Configuration via Web browser .............................................................................. 33 Main Menu .......................................................................................................................34 Commonly Used Buttons and Icons.................................................................................... 34 Viewing Basic System Information.....................................................
Inhaltszusammenfassung zur Seite Nr. 5
Contents Appendix: Specification................................................................................................................... 83 Software ................................................................................................................................... 83 Hardware .................................................................................................................................. 84 Rev:01_040220 v
Inhaltszusammenfassung zur Seite Nr. 6
Inhaltszusammenfassung zur Seite Nr. 7
Before You Use Before You Use The SIEMENS ADSL E-110/E-110-I is an Asymmetric Digital Subscriber Line (ADSL) Router. With the asymmetric technology, this device runs over standard copper phone lines. In addition, ADSL allows you to have both voice and data services in use simultaneously all over one phone line. The SIEMENS ADSL E-110/E-110-I is designed to offer cost-effective high-speed services for home or office users. It provides a downstream rate of up to 8 Mbps and upstream rate of
Inhaltszusammenfassung zur Seite Nr. 8
SIEMENS ADSL E-110_E-110-I user manual Configuration and Management • DSL Forum TR37-compliant auto configuration • SNMPv1 over DSL or Ethernet for access to the MIB-II (router only) • CLI (Command Line Interface) via serial interface or Telnet over Ethernet or DSL • Web-based Graphical User Interface (GUI) enabling end-user device configuration via Web browser • Update of boot image configuration data over TFTP/FTP System Requirements For using this, you have to make sure you have the f
Inhaltszusammenfassung zur Seite Nr. 9
Chapter 1: Overview Chapter 1: Overview Physical Outlook Physical Outlook Front Panel The following illustration shows the front panel of the ADSL Router: LED Indicators (Front Panel System Messages) The ADSL Router is equipped with orange LEDs on the front panel as described in the table below (from left to right): LED Status Description Power On Unit is powered on. Off Unit is powered off. Status Blinking Flashes to indicate that the device software is operational. ADSL Short
Inhaltszusammenfassung zur Seite Nr. 10
SIEMENS ADSL E-110_E-110-I user manual Rear PanelRear Panel The following figure illustrates the rear panel of your ADSL Router. ADSL Connects the device to an ADSL telephone jack using the supplied cable. USB Connects the device to the USB port on your PC. Ethernet Connects the device to your PC's Ethernet port, or to the uplink port on your LAN's hub, using the cable provided. Reset Button Reset to factory defaults. To reset the device to factory defaults, you don’t need to power off
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 2: Installation Chapter 2: Installation Choosing a place for the ADSL Router 1. Place the ADSL Router close to ADSL wall outlet and power outlet for the cable to reach it easily. 2. Avoid placing the device in places where people may walk on the cables. Also keep it away from direct sunshine or heat sources. 3. Place the device on a flat and stable stand. Connecting the ADSL Router Follow the steps below to connect the related devices. Note: For ADSL standard, a PSTN Microfil
Inhaltszusammenfassung zur Seite Nr. 12
SIEMENS ADSL E-110_E-110-I user manual ISDN installation If your telephone service is ISDN (SIEMENS ADSL E-110-I), proceed as follows to install your Hardware: 1. Remove the U-Line (incoming line) form your ISDN NT and plug it into the “LINE” plug of the ISDN Splitter. Use another phone line to connect your ISDN NT with your ISDN Splitter. Plug this phone line onto the “PHONE” plug of the ADSL splitter, and plug the other end of the line into the U-Line plug of your ISDN NT. PHONE port LI
Inhaltszusammenfassung zur Seite Nr. 13
Chapter 2: Installation USB driver installation Install the USB driver Note: The USB driver is only working on the following operating systems (OS): Windows 98, Windows 98SE, Windows ME, Windows 2000 and Windows XP If your Router is NOT equipped with an Ethernet interface you have to install first the USB driver in order to be able to configure your ADSL Router. For the driver installation proceed as follows: Note: Windows 98 users need the Windows 98 CD-ROM to complete the installation
Inhaltszusammenfassung zur Seite Nr. 14
SIEMENS ADSL E-110_E-110-I user manual 7. You will be asked whether the PC should be restarted. Click on Close. The PC will be restarted and the following window appears: 8. Click on Finish. Uninstall the USB driver Note: Do not unplug the ADSL router from the PC until the uninstaller asks!From your PC desktop click Start Programs Siemens DSL Modem Uninstall. 1. A message will be displayed asking you to confirm the removal of the SANTIS ADSL router software, click on Yes. 2. The
Inhaltszusammenfassung zur Seite Nr. 15
Chapter 3: Configuration Chapter 3: Configuration In order to access the Internet through the router, you must check the TCP/IP settings before configuring the router. Step 1: Configure TCP/IP on Client PC To access the ADSL Router via Ethernet, the host computer must meet the following requirements: • With Ethernet network interface. • Must have TCP/IP protocol installed. • Set client PC with obtain an IP address automatically. • With a Web browser installed: Internet Explorer 5.x or
Inhaltszusammenfassung zur Seite Nr. 16
SIEMENS ADSL E-110_E-110-I user manual 2. Double-click the Network icon. 3. The Network window appears. On the Configuration tab, check out the list of installed network components. Option 1: If you have no TCP/IP protocol, click [Add]. Option 2: If you have TCP/IP protocol, go to Step 6. 4. Highlight Protocol and click [Add]. 10 Rev:01_040220
Inhaltszusammenfassung zur Seite Nr. 17
Chapter 3: Configuration 5. On the left side of the windows, highlight Microsoft and then select TCP/IP on the right side. Then click [OK]. 6. When returning to Network window, highlight TCP/IP protocol for your NIC and click [Properties]. 7. On IP Address tab, select Obtain an IP address automatically. Then click [OK]. Rev:01_040220 11
Inhaltszusammenfassung zur Seite Nr. 18
SIEMENS ADSL E-110_E-110-I user manual 8. When returning to Network window, click [OK]. 9. Windows may ask you for the original Windows installation disk or additional files. Insert the Windows 95 installation CD-ROM and click [OK]. 10. Supply the requested files by pointing to the correct location, e.g. D:\Win95, where “D” represents the letter of your CD-ROM drive. 11. Wait for Windows copying files. 12. When prompted with System Settings Change dialog box, click [Yes] to resta
Inhaltszusammenfassung zur Seite Nr. 19
Chapter 3: Configuration For Windows 98 and Windows 98 SE Note: Windows 98 and 98 SE users need the Windows 98 / Windows 98 SE installation CD-ROM to complete the installation! 1. Click on the Start menu, point to Settings and click on Control Panel. 2. Double-click the Network icon. Rev:01_040220 13
Inhaltszusammenfassung zur Seite Nr. 20
SIEMENS ADSL E-110_E-110-I user manual 3. The Network window appears. On the Configuration tab, check out the list of installed network components. Option 1: If you have no TCP/IP protocol, click [Add]. Option 2: If you have TCP/IP protocol, go to Step 6. Your network interface card. Check out if TCP/IP for your NIC is installed or not. 4. Highlight Protocol and click [Add]. 5. On the left side of the windows, highlight Microsoft and then select TCP/IP on the right side. Then click
