Inhaltszusammenfassung zur Seite Nr. 1
RuggedBackbone™
RX1510
Hardware Installation Guide
Revision 104 - October 14, 2011
www.RuggedCom.com
Inhaltszusammenfassung zur Seite Nr. 2
RuggedBackbone™ RX1510 RuggedBackbone™ RX1510: Hardware Installation Guide Copyright © 2011 RuggedCom Inc. All Rights Reserved Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized except where expressly permitted. Violations are liable for damages. All rights are reserved, particularly for the purposes of patent application or trademark registration. This document contains proprietary information, which is protected by copyright. All
Inhaltszusammenfassung zur Seite Nr. 3
RuggedBackbone™ RX1510 Table of Contents FCC Statement And Cautions ................................................................................................... 8 1. Product Overview ................................................................................................................... 9 1.1. Functional Overview .................................................................................................... 9 1.2. Feature Highlights ........................................
Inhaltszusammenfassung zur Seite Nr. 4
RuggedBackbone™ RX1510 3.14.1. APE Overview .............................................................................................. 34 3.14.2. Supported Operating Systems ..................................................................... 34 3.14.3. Secondary Network Interface ....................................................................... 35 3.14.4. Installing an Operating System .................................................................... 36 3.14.5. The APE BIOS ......
Inhaltszusammenfassung zur Seite Nr. 5
RuggedBackbone™ RX1510 List of Figures 2.1. RX1510 Chassis Slot Assignment .................................................................................... 11 2.2. Front View - RX1510 ........................................................................................................ 12 2.3. CG01: 2 × 10/100/1000TX RJ45 ...................................................................................... 13 2.4. 6TX01: 6 × 10/100/1000TX RJ45 .............................................
Inhaltszusammenfassung zur Seite Nr. 6
RuggedBackbone™ RX1510 3.19. RJ45 Ethernet Pin Configuration .................................................................................... 25 3.20. RJ45 Serial Pin Configuration ......................................................................................... 27 3.21. RJ45 DDS Pin Configuration .......................................................................................... 27 3.22. DDS Module Rx and Tx LED Indicators .....................................................
Inhaltszusammenfassung zur Seite Nr. 7
RuggedBackbone™ RX1510 List of Tables 2.1. Module Status LED Indications ......................................................................................... 12 3.1. RJ45 Serial Console Pinout .............................................................................................. 24 3.2. RJ45 T1/E1 Pin Assignment ............................................................................................. 24 3.3. RJ45 Ethernet Pin Assignment ..........................................
Inhaltszusammenfassung zur Seite Nr. 8
FCC Statement And Cautions FCC Statement And Cautions Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed
Inhaltszusammenfassung zur Seite Nr. 9
1. Product Overview 1. Product Overview 1.1. Functional Overview The RuggedBackbone™ RX1510 is a cost-efficient, rugged layer 3 switch and router. The RX1510’s modular and field replaceable platform allows you to select WAN, serial, and Ethernet options, making it ideally suited for electric power utilities, the industrial plant floor, and traffic control systems. The appliance’s compact form factor makes it ideal for pole mount applications or installation in restricted spaces. The RX1510 is de
Inhaltszusammenfassung zur Seite Nr. 10
1. Product Overview WAN Port Options • Up to 4 T1/E1 ports via RJ45 connectors (channelized/unchannelized) • Up to 2 E1 ports via BNC connectors (channelized/unchannelized) • Cellular/DDS Serial Ports • Fully compliant EIA/TIA RS485, RS422, RS232 serial ports (software selectable) with RJ45 connectors • Raw socket mode support allows conversion of any serial protocol Protocols WAN • • Frame Relay RFC 1490 or RFC 1294 • PPP RFC 1661, 1332, 1321, 1334, PAP, CHAP Authentication • Multilink PPP RFC
Inhaltszusammenfassung zur Seite Nr. 11
2. RuggedBackbone™ Modules 2. RuggedBackbone™ Modules The RX1510 chassis provides six module slots . Each slot accommodates a particular type of RuggedCom module. Figure 2.1, “RX1510 Chassis Slot Assignment” shows the module slots on the RX1510. Figure 2.1. RX1510 Chassis Slot Assignment The RX1510 chassis supports the following modules: LM1 through LM4 The RX1510 chassis supports up to four line module (LM) cards. For more information on line modules, see Section 2.2, “Line Modules (LM)”. All m
Inhaltszusammenfassung zur Seite Nr. 12
2. RuggedBackbone™ Modules 2.1. Front Panel The RX1510 Front Panel is equipped with an RS232 serial console port for initial management functions, and a locally connected 10/100Base-T Ethernet port for system management out of band from the switch fabric. Figure 2.2. Front View - RX1510 Other Front Panel features include: • Utility USB port. • Line module indicator LEDs. • Alarm Indicator LED, which indicates system alarm status. • Lamp Test / Alarm Cutoff (LT/ACO) button. • Removable 1GB Compac
Inhaltszusammenfassung zur Seite Nr. 13
2. RuggedBackbone™ Modules 2.2. Line Modules (LM) The RuggedBackbone™ RX1510 supports four line modules in slots LM1 through LM4 . Several types of line modules may be ordered, depending on the type, speed, and number of Ethernet ports required. The following illustrations show the typical port configurations and connectors available for RX1510 line modules. For complete information on the available line modules, refer to the RuggedBackbone™ RX1510 data sheet. Only one T1/E1 module may be used p
Inhaltszusammenfassung zur Seite Nr. 14
2. RuggedBackbone™ Modules 2.2.3. SFP Modular Figure 2.12. FG5*: 2 × 1000LX/1000SX SFP Figure 2.13. FX5*: 4 × 100FX/100LX/100SX SFP Figure 2.14. 6FX50: 6 × 100FX SFP 2.2.4. WAN Figure 2.15. TC1: 1 × T1/E1 RJ45 Figure 2.16. E01: 1 × E1 BNC Figure 2.17. TC2: 2 × T1/E1 RJ45 Figure 2.18. E02: 2 × E1 BNC Figure 2.19. TC4: 4 × T1/E1 RJ45 2.2.5. Serial Figure 2.20. 6S01: 6 × Serial RJ45 2.2.6. Cellular Modem Figure 2.21. W11, W21, W32 Cellular Modem Figure 2.22. W12, W22 Cellular Modem RuggedCom® Rugge
Inhaltszusammenfassung zur Seite Nr. 15
2. RuggedBackbone™ Modules 2.2.7. DDS - Digital Data Services Figure 2.23. D02: 1 × DDS RJ45 2.2.8. APE - Appplication Processing Engine Figure 2.24. APE 1402 RuggedCom® RuggedBackbone™ 15 RX1510 Installation Guide Rev 104
Inhaltszusammenfassung zur Seite Nr. 16
2. RuggedBackbone™ Modules 2.3. Power Supply The RX1510 may be equipped with one or two power modules. The use of two power modules is recommended to provide redundancy and load balancing. A single power module is capable of delivering a maximum of 42W, and accepts either AC or DC power at its input. Power modules may be ordered with a screw terminal block or with a pluggable terminal block. The screw terminal block features a safety cover which must be removed to make wiring connections, and mu
Inhaltszusammenfassung zur Seite Nr. 17
3. Installation 3. Installation 3.1. Mounting The RuggedBackbone™ RX1510 features optional mounting brackets for panel and DIN rail mounting. The optional brackets attach to both sides of the appliance at the rear of the chassis. For panel mounting, the mounting bracket provides four mounting holes. For DIN rail mounting, the DIN adaptor mounts to a standard 1" DIN rail and is secured with a lock screw on each adaptor. To attach the mounting brackets, align the brackets with the threaded holes o
Inhaltszusammenfassung zur Seite Nr. 18
3. Installation Figure 3.3. DIN Rail Mounting: Side View 3.1.1. RX1510Dimensions Figure 3.4. RX1510 Dimensions – Front View RuggedCom® RuggedBackbone™ 18 RX1510 Installation Guide Rev 104
Inhaltszusammenfassung zur Seite Nr. 19
3. Installation Figure 3.5. RX1510Dimensions – Top View Figure 3.6. RX1510 Dimensions – Side View RuggedCom® RuggedBackbone™ 19 RX1510 Installation Guide Rev 104
Inhaltszusammenfassung zur Seite Nr. 20
3. Installation 3.2. Power Supply Wiring and Grounding The RX1510 supports dual redundant power supplies, power module 1 (PM1) and power module 2 (PM2). Power connections are located on the PM1 and PM2 module face plates. An optional chassis ground connection is located on the front panel as shown in . RX1510 products can be equipped with either a Phillips Screw Terminal Block or a Phoenix Plug Terminal Block. The Phillips Screw Terminal Block has Phillips screws with compression plates, allowin
