Inhaltszusammenfassung zur Seite Nr. 1
6218-I1 Wireless Router
User’s Guide
Document No. 6218-A2-GB23-00
September 2005
Inhaltszusammenfassung zur Seite Nr. 2
Copyright 2005 Paradyne Corporation. All rights reserved. Printed in U.S.A. Notice This publication is protected by federal copyright law. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language in any form or by any means, electronic, mechanical, magnetic, manual or otherwise, or disclosed to third parties without the express written permission of Paradyne Corporation, 8545 126th Ave.
Inhaltszusammenfassung zur Seite Nr. 3
! Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these slots and openings must not be blocked or covered. 3. Do not allow anything to rest on the power cord and do not locate the product where persons will walk on the power cord. 4. Do not attempt to service thi
Inhaltszusammenfassung zur Seite Nr. 4
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferenc
Inhaltszusammenfassung zur Seite Nr. 5
Notice to Users of the Canadian Telephone Network NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation IC before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. NOTICE: The Ringer Equivalence Numbe
Inhaltszusammenfassung zur Seite Nr. 6
E September 2005 6218-A2-GB23-00
Inhaltszusammenfassung zur Seite Nr. 7
Contents About This Guide Document Purpose and Intended Audience . . . . . . . . . . . . . . . . . . . . v Document Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Product-Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi 1 Introduction Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 8
Contents ARP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 4 Quick Setup Quick Setup with Auto-Connect Enabled . . . . . . . . . . . . . . . . . . . . . . . 4-1 Quick Setup with Auto-Connect Disabled . . . . . . . . . . . . . . . . . . . . . . 4-3 5 Advanced Setup WAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Add Function – ATM PVC Configuration . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 9
Contents Wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25 Wireless - Basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25 Wireless - Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25 Wireless - MAC Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27 Wireless - Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 10
Contents iv September 2005 6218-A2-GB23-00
Inhaltszusammenfassung zur Seite Nr. 11
About This Guide Document Purpose and Intended Audience This guide contains detailed information about the 6218-I1 router. It is intended for all users of the router. Document Summary Section Description Chapter 1, Introduction Describes the features of the router. Chapter 2, Hardware Shows how to connect the router and set up your PC to Installation and PC Setup manage the router. Chapter 3, Device Information Explains how to use the web interface to obtain statistics and other information a
Inhaltszusammenfassung zur Seite Nr. 12
About This Guide Product-Related Documents Complete documentation for Paradyne products is available online at www.paradyne.com. Select Support → Technical Manuals. To order a paper copy of a Paradyne document, or to speak with a sales representative, please call 1-727-530-2000. vi September 2005 6218-A2-GB23-00
Inhaltszusammenfassung zur Seite Nr. 13
Introduction 1 Introduction Congratulations on becoming the owner of a 6218 wireless router. This User’s Guide will show you how to set up the router, and how to customize its configuration to get the most out of this product. Features The 6218 router has the following features: Built-in Asynchronous Digital Subscriber Line (ADSL) modem which offers G.dmt, G.lite, T1.413, ADSL2, Annex L, and ADSL2+ to meet different linking speeds from your Internet Service Provider (ISP) Four 10/100BaseT E
Inhaltszusammenfassung zur Seite Nr. 14
1. Introduction System Requirements In order to use the 6218 wireless router for Internet access, you must have the following: ADSL service subscription from your ISP A PC with: — An Ethernet 10/100BaseT network interface card — A processor equivalent to or faster than a Pentium II 133 MHz — 32 MB RAM or greater — Windows 95b, 98, 98SE, 2000, ME, NT, or XP (Note: Windows 95 requires the installation of the Winsock program, not included.) — (Optional) An Ethernet hub or switch, if you wish t
Inhaltszusammenfassung zur Seite Nr. 15
1. Introduction Front Panel The front panel contains LED indicators that show the status of the unit. Figure 1-1. Front Panel LEDs Table 1-1. Front Panel Label and LEDs Label Color Function xDSL LNK Green On: ADSL link is established. Flashing: ADSL link is established and active. Off: No ADSL link. xDSL ACT Green Off: No PPP connection is established or the connection is not used. Blinking: a PPP connection is being attempted.
Inhaltszusammenfassung zur Seite Nr. 16
1. Introduction Rear Panel Figure 1-2. Back Panel The rear panel contains the ports for the router's data and power connections. Table 1-2. Rear Panel Labels and Connectors Label Function LINE Connects to your ADSL line LAN 1–4 Connects the router to Ethernet devices on your LAN, such as your PC's Ethernet port, or the uplink port on a hub or switch RESET/DEFAULT To reset the router to its default settings POWER Connects
Inhaltszusammenfassung zur Seite Nr. 17
Hardware Installation and PC Setup 2 Overview This chapter provides basic instructions for connecting the router to a computer or a LAN and to the Internet using DSL. The first part provides instructions to set up the hardware, and the second part describes how to prepare your PC for use with the router. It is assumed that you have already subscribed to DSL service with your Internet service provider (ISP). 6218-A2-GB23-00 September 2005 2-1
Inhaltszusammenfassung zur Seite Nr. 18
2. Hardware Installation and PC Setup Connecting the Hardware Shut down your PC and any other equipment before connecting it to the router. To connect your router: Procedure 1. Verify that the router’s power switch is in the Off (outward) position. Verify that any PCs and other LAN devices you will attach (such as hubs or switches) are turned off. 2. Use the provided modular phone cable to connect the LINE jack of the router to your RJ11 wall jack. 3. Use the provided Ethernet cable to conne
Inhaltszusammenfassung zur Seite Nr. 19
2. Hardware Installation and PC Setup Figure 2-1. Hardware Installation Table 2-1. LED Indicators This LED . . . Should be: POWER Solid green to indicate that the device is turned on. If this light is not on, check if the power adapter is attached to the router and plugged into an AC power source. STATUS Solid green to indicate that the router can communicate with your ISP via ADSL, or flashing when the router is trying to c
Inhaltszusammenfassung zur Seite Nr. 20
2. Hardware Installation and PC Setup Configuring Your Computer Before you can access the router over the LAN you have to configure your PC's TCP/IP address to be 192.168.1.x (where x is any number between 3 and 254), with a subnet mask of 255.255.255.0. Your router's default IP address is 192.168.1.1. If you know the version of Windows that you use, go to the appropriate section below to learn how to set the IP address of your PC. To determine the version of Windows running on your PC, cli
