Bedienungsanleitung NetComm NP740N

Inhaltszusammenfassung zur Seite Nr. 1

Quick Start Guide
NP740n
11n Wireless Broadband Router

Inhaltszusammenfassung zur Seite Nr. 2

Package coNteNtS If any of the following items are missing or damaged, please contact your local reseller for replacement. • NP740n 11n Wireless Router • Vertical Stand • This printed Quick Start Guide • CDROM containing User Guide (in PDF Format - PDF Reader software is included) • 12VDC 1A Power Supply Sy Stem ReQuiRemeNtS • Internet connection, provided by xDSL or cable modem with a RJ-45 Ethernet port. • Computer or network devices with wired or wireless network interface card. • Web browse

Inhaltszusammenfassung zur Seite Nr. 3

Internet Internet 2. Connect all your computers, network devices (network-enabled consumer devices other than computers, like game console, or switch / hub) to the LAN port of the router. Internet Internet ADSL or Cable Modem ADSL or Cable Modem ADSL or Cable Modem ADSL or Cable Modem Switch/Router Switch/Router Gaming Console Desktop Computer Gaming Console Desktop Computer 3. Connect the A/C power adapter to the wall socket, and then connect it to the ‘Power’ socket of the router. Internet In

Inhaltszusammenfassung zur Seite Nr. 4

NetwoRk SetuP Please use the web browser to configure the wireless router. A computer with wired Ethernet connection to the wireless router is required for this first-time configuration. 1. Set your computer to obtain an IP address from wireless router: click ‘Start’ button (it should be located at lower-left corner of your computer), then click ‘Run’ (Windows XP) or click the Search Bar (Windows Vista) and type ‘ncpa.cpl’ and press enter. This will take you to the ‘Network Connections’ wind

Inhaltszusammenfassung zur Seite Nr. 5

3. After the IP address setup is complete, please click ‘start’ -> ‘run’ at the bottom-lower corner of your desktop, then input ‘cmd’ and click ‘OK’. 4. Input ‘ipconfig’, then press ‘Enter’ key. Please check the IP address followed by ‘Default Gateway’ (In this example, the IP address of router is 192.168.1.1) Please note that this value may be different. 5. Start the web browser and input the IP address of wireless router in address bar, and the following message should be shown. Please inpu

Inhaltszusammenfassung zur Seite Nr. 6

7. Select time zone of the area where you live, then click ‘Next’. 8. Select a broadband type of the Internet connection you’re using, then click ‘Next’. 9. Please input the Internet connection parameters, you should use the value provided by your Internet service provider. Click ‘OK’ when you finish. (The content of this page will vary depending on the connection method you selected in step 8) NP740N 11n Wireless Router Quick Start guide YML888  www.netcomm.com.au

Inhaltszusammenfassung zur Seite Nr. 7

10. Click ‘Apply’. 11. When you see this message, the router will be ready with new settings within 50 seconds. 12. Please use your computer to connect to any website on Internet, or start any Internet application and check that they are working properly. For instructions of advanced settings and wireless network setup, please refer to the user guide in supplied cd-Rom. YML888 NP740N NP740N 11n 11n Wireless Wireless Router Quick Start Router Quick Start uide ��uide www.netcomm.com.au 7

Inhaltszusammenfassung zur Seite Nr. 8

contact information If you have any technical difficulties with your product, please do not hesitate to contact NetComm’s Customer Support Department. Email: support@netcomm.com.au www.netcomm.com.au Note: NetComm Technical Support for this product only covers the basic installation and features outlined in the Quick Start Guide. For further information regarding the advanced features of this product, please refer to the configuring sections in this User Guide or contact a Network Specialist. N