Inhaltszusammenfassung zur Seite Nr. 1
USB 2.0 Link Cable
User Manual English
LINDY No. 42953
www.lindy.com
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (June 2005)
Inhaltszusammenfassung zur Seite Nr. 2
CONTENTS 1. Introduction----------------------------------------------------------------------------------2 2. Package Contents-------------------------------------------------------------------------2 3. Product Features--------------------------------------------------------------------------2 4. System Requirements-------------------------------------------------------------------2 5. Driver Installation (PC to PC File Transfer) ---------------------------------3 ® 5.
Inhaltszusammenfassung zur Seite Nr. 3
1. Introduction Congratulations on your purchase of the LINDY USB 2.0 Link cable. This unique cable allows you to easily connect two computers via a USB port and instantly transfer files at great speed. The USB 2.0 Link cable is your fast solution for peer-to-peer file transfer between two computers via the USB port. The cable provides true plug-and- play capability while transferring files at much greater speeds than USB1.1. The SuperLink application provides a drag-and-drop user-
Inhaltszusammenfassung zur Seite Nr. 4
5. Driver Installation (PC to PC File Transfer) ® 5.1 Windows 98 Driver Installation 5.1.1 Power on both computers and make sure the USB port is enabled and working properly. Insert the CD in to your CD-Rom drive. 5.1.2 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” (D: represents CD-ROM) and double click on “Setup.exe” to install driver. Attention: Don’t plug the USB 2.0 Link cableinto PC’s USB Port until the driver is installed. ® 5.1.3
Inhaltszusammenfassung zur Seite Nr. 5
5.1.5 Once the installation is complete, a new icon called “SuperLink” will appear on your desktop. 5.1.6 Plug the USB 2.0 Link cableinto an available USB Port on the PC, the pc will detect and install a new item “USB SuperLink Adapter” within “Universal Serial Bus controllers” in “Device Manager”. USB 2.0 Link Cable User’s
Inhaltszusammenfassung zur Seite Nr. 6
® 5.2 Windows 98 Driver Un-Installation If you don’t want to use this cable and want to delete the driver from the PC then please use the following un-install procedure. Attention: Before you go through the un-installation procedure, please make sure that the USB 2.0 Link cablehas been unplugged from the PC. 5.2.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” and double click on “Setup.exe”.
Inhaltszusammenfassung zur Seite Nr. 7
® 5.3 Windows ME Driver Installation 5.3.1 Power on both computers and make sure the USB port is enabled and working properly. Insert the CD in to your CD-Rom drive. 5.3.2 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” (D: represents CD-ROM) and double click on “Setup.exe” to install driver. Attention: Don’t plug the USB 2.0 Link cableinto the PC’s USB Port until the driver is installed. ® 5.3.3 Windows will install the driver to
Inhaltszusammenfassung zur Seite Nr. 8
5.3.5 Once the installation is complete, a new icon called “SuperLink” will appear on your desktop. 5.3.6 Plug the USB 2.0 Link cableinto an available USB Port on the PC, the pc will detect and install a new item “USB SuperLink Adapter” within “Universal Serial Bus controllers” in “Device Manager”. USB 2.0 Link Cab
Inhaltszusammenfassung zur Seite Nr. 9
® 5.4 Windows ME Driver Un-Installation If you don’t want to use this cable and want to delete the driver from the PC then follow the un-install procedure as following. Before you go through the un-installation procedure, please make sure that the USB 2.0 Link cablehas been unplugged from the PC. 5.4.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” and double click on “Setup.exe”. 5.4.2 Select “Only remove USB Link Adapter driver”,
Inhaltszusammenfassung zur Seite Nr. 10
® 5.5 Windows 2000 Driver Installation 5.5.1 Power on both computers and make sure the USB port is enabled and working properly. Insert the CD in to your CD-Rom drive. 5.5.2 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” (D: represents CD-ROM) and double click on “Setup.exe” to install driver. Attention: Don’t plug the USB 2.0 Link cableinto PC’s USB Port until the driver is installed. ® 5.5.3 Windows will install the driver
Inhaltszusammenfassung zur Seite Nr. 11
5.5.5 Once installation is complete, a new icon “SuperLink” will appear on your desktop. 5.5.6 Plug the USB 2.0 Link cableinto an available USB Port, , the pc will detect and install a new item “USB SuperLink Adapter” within “Universal Serial Bus controllers” of “Device Manager”. USB 2.0 Link Cable User’s Manual 10
Inhaltszusammenfassung zur Seite Nr. 12
® 5.6 Windows 2000 Driver Un-Installation If you don’t want to use this cable and want to delete the driver from the PC then just follow the un-install procedure as following. Before you go through the un-installation procedure, please make sure that the USB 2.0 Link cablehas been unplugged from the PC. 5.6.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” and double click on “Setup.exe”. 5.6.2 Select “Only remove USB Link
Inhaltszusammenfassung zur Seite Nr. 13
® 5.7 Windows XP Driver Installation 5.7.1 Power on both computers and make sure the USB port is enabled and working properly. Insert the CD in to your CD-Rom drive. 5.7.2 Select path of “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” (D: represents CD-ROM) and double click on “Setup.exe” to install driver. Attention: Don’t plug the USB 2.0 Link cableinto PC’s USB Port until the driver is installed. ® 5.7.3 Windows will install the driver to “C:\Program Fi
Inhaltszusammenfassung zur Seite Nr. 14
5.7.5 Click on “Finish” to complete this installation. 5.7.6 After installation is complete a new icon “SuperLink” will appear on your desktop. 5.7.7 Plug the USB 2.0 Link cableinto PC’s USB Port, then “Found New Hardware Wizard” will help you to install driver. Select “Install the software automatically [Recommended]” and click “Next” to continue.
Inhaltszusammenfassung zur Seite Nr. 15
® 5.7.8 Windows will show a warning message as following, press “Continue Anyway” to go on this installation. 5.7.9 Click on “Finish” to complete this installation. 5.7.10 Plug the USB 2.0 Link cableinto a USB Port, , the pc will detect and install a new item “USB SuperLink Adapter” at “Universal Serial Bus controllers” of “Device Manager”.
Inhaltszusammenfassung zur Seite Nr. 16
® 5.8 Windows XP Driver Un-Installation If you don’t want to use this cable and want to delete the driver from the PC then just follow the un-install procedure as following. Before you go through the un-installation procedure, please make sure that the USB 2.0 Link cablehas been unplugged from the PC. 5.8.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” and double click on “Setup.exe”. 5.8.2 Select “Only remove USB Link Adapter d
Inhaltszusammenfassung zur Seite Nr. 17
6. Running the SuperLink Application Program (PC to PC File Transfer) 6.1 Windows 98, ME, Windows 2000 & Windows XP Follow the steps below on how to run the SuperLink application program: The installation of the application is similar for all four operating systems. We ® have used Windows 2000 for this example. 6.1.1 Once PC#1 and PC#2 have finished installing the driver, connect each end of the USB 2.0 Link cableto PC#1 and PC#2. 6.1.2 Double click on the icon “Sup
Inhaltszusammenfassung zur Seite Nr. 18
6.1.5 The remote site will display “It’s busy now, please wait ….” 7. Using USB Networking (Ethernet Emulation) ® ® ® ® 7-1 Windows 98, Windows ME, Windows 2000, Windows XP Driver Installation Insert the CD in to your CD-Rom drive. Select the path “D:\DRIVER\ USB 2.0 LINK CABLE 42953\WINDOWS\Virtual Network_Install” (D: represents CD-R
Inhaltszusammenfassung zur Seite Nr. 19
8. FAQ Q: What if the USB 2.0 Link cablecan’t be successfully installed? A: This situation is common when your USB 2.0 port is a PCI card. If your USB 2.0 PCI Card uses a Microsoft driver then please download version 5.1.2600 (used with Windows 2000 & XP) from the Microsoft Web site. Q: How do I know the two PC’s are successfully connected? A: The bottom of the screen will show “Remote Connected” on both computers. Q: Should I un-install the driver each time the cab
Inhaltszusammenfassung zur Seite Nr. 20
10. FCC Statement This device generates and uses radio frequency and may cause interference to radio and television reception if not installed and used properly. This has been tested and found to comply with the limits of a Class B computing device in accordance with the specifications in Part 15 of FCC Rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will
