Inhaltszusammenfassung zur Seite Nr. 1
Encore 802.11n Wireless Router
User Manual
Inhaltszusammenfassung zur Seite Nr. 2
FCC Certifications Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfe
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents UNPACKING INFORMATION ····················································································· 1 INTRODUCTION TO WIRELESS ROUTER ··························································· 1 General Description····································································································· 1 Key Features ··············································································································· 2 The Front Panel····
Inhaltszusammenfassung zur Seite Nr. 4
System Log Settings··························································································· 41 Date/Time Settings ····························································································· 42 Management·············································································································· 43 Admin Account···································································································· 43 Ping Test················
Inhaltszusammenfassung zur Seite Nr. 5
Unpacking Information Thank you for purchasing Encore 802.11n Wireless Router. Before you start, please check all the contents of this package. The product package should include the following: 1. One Wireless Router 2. One power adapter 3. One User Manual (CD) 4. One detachable antenna Introduction To Wireless Router General Description The Encore 802.11n Wireless Router is compatible with IEEE802.11n standard, which supports data rate up to 300 Mbps in 2.4 GHz band, which is als
Inhaltszusammenfassung zur Seite Nr. 6
Key Features The switch provides the following key features: Compatible with IEEE 802.11n, 802.11g/b wireless standards. Provides three 802.11n/g/b wireless Reverse SMA detachable antennas High speed transfer data rate up to 300Mbps Supports wireless data encryption with 64/128-bit WEP, WPA and WPA2 Supports authentication for wireless connectivity based on ESSID Supports Multiple BSSID. Provides MAC access control and hidden SSID function WDS supported with WEP, TKIP and AES e
Inhaltszusammenfassung zur Seite Nr. 7
The Front Panel The front panel of the Wireless Router: LED Definitions Status LED The LED will be dark for a few seconds when the system is started. After that, the LED will blink periodically to show the Wireless Router is working normally. If the LED stays green/dark that means the system failed, you need to contact your agent or try to reboot the system. WLAN LED I. When Wireless AP is ready for data transmitting and receiving, it is steady green. II. When the data is trans
Inhaltszusammenfassung zur Seite Nr. 8
The Rear Panel The rear panel of the Wireless Router is shown below. Power Connection Plug the circle end of the power adapter firmly into the rear panel of the Wireless Router, and the other end put into an electric service outlet then the system is ready. Placement Desktop Option 1. The Router has one plastic stand that can be divided into two parts. 2. Combine one part of stand with the side of router. 3. Do the same with the second part. 4. Place the Router. Restore
Inhaltszusammenfassung zur Seite Nr. 9
Installing And Using Wireless Router This Chapter provides a step-by-step guide to the installation and configuration of the Wireless Router. We suggest you go over the whole chapter and then do more advanced operation. Network configuration setup Steps to build up the network: Connect the ADSL or Cable modem to the Ethernet WAN port on the back of the Wireless Router by using the UTP cable. Connect the phone line from the wall socket to the line-in port on the ADSL modem, or the coa
Inhaltszusammenfassung zur Seite Nr. 10
Procedures to configure IP addresses for your computer 1. If you are in Classic Start menu view, click Start > Settings > Control Panel > Network Connections. If you are in Start menu view, click Start > Control Panel > Network Connections. 2. Double click Local Area Connection. 3. Choose Internet Protocol (TCP/IP) and click Properties. 4. You may choose “Obtain an IP address automatically”(recommend) to get IP address automatically or
Inhaltszusammenfassung zur Seite Nr. 11
Management Wireless Router configuration setup In order to make the whole network operate successfully, it is necessary to configure the Wireless Router through your computer has a WEB browser installed. Please follow up the steps listed below. 1. Double click the Internet WEB browser icon on your desktop screen (Netscape Communicator 4.0 and Internet Explorer 3.0 or update version) 2. Type 192.168.1.1 into the URL WEB address location and press Enter. 3. The Login Name and Password R
Inhaltszusammenfassung zur Seite Nr. 12
4. The Graphic User Interface After the password authorization, the Information page shows up as the home page of the Graphic User interface. You may click on each folder on left column of each page to get access to each configuration page. Note: Please note that you should click the Save Settings button to apply your configuration to this device. You can also restore the default settings by clicking the Reset Settings button. 8
Inhaltszusammenfassung zur Seite Nr. 13
Network Setting WAN Interface Setup This page allows users to configure those parameters for connecting to Internet. You may select the WAN Access Type from the “My Connection type” column and configure parameters for each mode. 9
Inhaltszusammenfassung zur Seite Nr. 14
Static IP Mode Items Information IP Address, Subnet Mask and Fill in the IP address, Subnet Mask and Default Gateway Default Gateway that provided by your Internet Service Provider (ISP). nd Primary and 2 DNS server To specify the Domain Name Server (DNS). st Enter the DNS provided by your ISP in 1 nd and 2 server. Static IP MTU To enable the Maximum Transmission Unit of Router setup. Any packet over this number will be chopped up into suitable size before sending. Larger number wi
Inhaltszusammenfassung zur Seite Nr. 15
DHCP Client Mode Items Information Set DNS server If your DNS provide by ISP is dynamic, choose “Automatically”, if not choose “Manually” and enter the DNS provided by your ISP in DNS 1, 2. DHCP MTU To enable the Maximum Transmission Unit of Router setup. Any packet over this number will be chopped up into suitable size before sending. Larger number will enhance the transmission performance. Enter your MTU number in the text-box to set the limitation (default 1500bytes). Host Nam
Inhaltszusammenfassung zur Seite Nr. 16
PPPoE Mode Items Information Fill in the User Name and Password that provided PPPoE Username and Password by your ISP. The default username/password is USERNAME/PASSWORD. Set DNS server If your DNS provide by ISP is dynamic, choose “Automatically”, if not, choose “Manually” and enter the DNS provided by your ISP in DNS 1, 2. PPPoE MTU To enable the Maximum Transmission Unit of Router setup. Any packet over this number will be chopped up into suitable size before sending. Larger n
Inhaltszusammenfassung zur Seite Nr. 17
LAN Interface Setup To set up the configuration of LAN interface, private IP of you router LAN port and subnet mask for your LAN segment. 13
Inhaltszusammenfassung zur Seite Nr. 18
Router Settings Items Information IP address The IP of your Router LAN port (default 192.168.1.1). Subnet Mask Subnet Mask of you LAN (default 255.255.255.0). DNS Proxy DNS proxy takes DNS queries from the local network and forwards them to an Internet DNS. Mark the check box to enable DNS Proxy function or clear to disable. * Please click on the Save Settings button or the Reset Settings button on the above table to save/reset the configurations. DHCP Server Settings Items Information
Inhaltszusammenfassung zur Seite Nr. 19
QoS Settings The QoS (Quality of Service) Settings page provides different priority to different users or data flows. 15
Inhaltszusammenfassung zur Seite Nr. 20
Total Bandwidth Settings You can setup the total upload/ download bandwidth manually (default 102400). Bandwidth QoS Settings Items Information Enable this Rule Mark to enable the configuration, and clear to disable. Type Select the type of download or upload. LAN IP Address Fill in the MAC address that you are going to control. Priority Select the transmission priority of low, medium, high, or highest. Bandwidth Fill in the minimum and maximum bandwidth. Comment Give a definition to t
