Bedienungsanleitung D-Link DWL-900AP

Inhaltszusammenfassung zur Seite Nr. 1

This product can be set up using any DWL-900AP+

current web browser, i.e., Internet
D-Link AirPlus™

Explorer 5x, Netscape Navigator 4x.
Wireless Access Point


Before You Begin
It’s best to use a computer (with an Ethernet adapter) that is connected to a router for
configuring the DWL-900AP+. The default IP address for the DWL-900AP+ is
192.168.0.50 with a Subnet Mask of 255.255.255.0. You will need to assign your
computer a Static IP address within the same range as the

Inhaltszusammenfassung zur Seite Nr. 2

Connecting The DWL-900AP+ Wireless Access Point To Your Network A. First, connect the power adapter to the receptor at the back panel of the DWL-900AP+ and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation. B. Using a Straight-Through Ethernet When connecting cable, insert one end of the cable to the the DWL-900AP+ Ethernet port on the back panel of the Wireless Access Point to DWL-900AP+ and t

Inhaltszusammenfassung zur Seite Nr. 3

When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: Using The Setup Wizard Open your Web browser and type “http://192.168.0.50” into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type “admin” for the username and leave the password field blank. Click OK

Inhaltszusammenfassung zur Seite Nr. 4

Using The Setup Wizard (continued) Once you have logged in, the Home screen will appear. Click Run Wizard You will see the following screens. Click Next

Inhaltszusammenfassung zur Seite Nr. 5

Step 1 - Set up your new password. You have the option to establish a password. Click Next Step 2 - Wireless Setup The default wireless settings are: SSID = default Channel = 6 You can change these settings to match an existing wireless network. Click Next Step 3 - Encryption The DWL-900AP+ is capable of three levels of wireless encryption - 64-bit, 128-bit, and 256-bit. By default the encryption is disabled. You can change the encryption settings for more secu

Inhaltszusammenfassung zur Seite Nr. 6

Your Setup is Complete! Click Restart Click Close You will be returned to the Home tab.

Inhaltszusammenfassung zur Seite Nr. 7

Click Exit For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-management interface; or to the manual located on the CD-ROM.

Inhaltszusammenfassung zur Seite Nr. 8

Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone. D-Link Technical Support over the Telephone: (800) 758-5489 24 hours a day, seven days a week D-Link Technical Support