Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents Table of Contents ADSL Tone Settings .........................................3 General Information ....................................................4 Virtual Server .........................................................33 Package Contents....................................................4 NAT—Virtual Servers Setup ............................33 Important Safety Instructions ...................................4 DMZ ......................................................
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Status ..........................................................................54 Device Info .............................................................54 DHCP Clients.........................................................54 WAN Info ................................................................55 Route Info ..............................................................55 Log .........................................................................56 LAN ..............
Inhaltszusammenfassung zur Seite Nr. 4
Section 1 - General Information General Information The D-Link DSL-540B is an ADSL + router off ering the convenience of 4 LAN ports for additional computers. This user manual provides you with a simple and easy-to-understand format to install and configure your router. Package Contents • ADSL/+ 4-P ort Ethernet Router • 1VDC, 1A DC CEC-compliant switching power adapter • RJ-11 telephone cable • RJ-45 Ethernet cable • Quick Install Guide • Documentation CD-ROM (QIG + user manual) Note:
Inhaltszusammenfassung zur Seite Nr. 5
Section 1 - General Information Front Panel View Internet LED A solid green light indicates that the router has an IP DSL LED address and is connected to the Internet. A red light A Solid light indicates the DSL is synchronized. indicates that the router does not have an IP address A flashing LED indicates the router is attempting or authentication has failed. No light indicates that to synchronize with the DSL provider. an ADSL connection is not present or the router is in bridge mode.
Inhaltszusammenfassung zur Seite Nr. 6
Section 1 - General Information Rear Panel View ON/OFF LAN Ports (1-4) DSL Line Press this button to turn the Connect Ethernet devices such as Connect to an active telephone unit on or off. computers, switches, and hubs. line (RJ-11). Reset Power Receptor Pressing the Reset button restores the router to Receptor for the supplied power its original factory default settings. adapter. D-Link DSL-540B ADSL + 4-P ort Router User Manual 6
Inhaltszusammenfassung zur Seite Nr. 7
Section - Installing The Router Installing the Router Connect the ADSL and Telephone Lines • Connect an RJ-11 cable between the wall phone jack and the line-end of the splitter (see diagram below). • Attach another RJ-11 phone cable to the router-end of the splitter and the ADSL port on the rear panel of the router. • The phone-end of the splitter will be connected to the telephone using a third RJ-11 phone cable. NOTE: See connections on the installation diagram. Connect the PC to the
Inhaltszusammenfassung zur Seite Nr. 8
Section - Installing The Router Connect the Power Adapter • Complete the process by connecting the supplied 1VAC, 1A power adapter to the POWER connector on the back of the device and plug the adapter into a wall outlet or power strip. Then turn on and boot up your PC and any LAN devices, such as hubs or switches, and any computers connected to them. D-Link DSL-540B ADSL + 4-P ort Router User Manual 8
Inhaltszusammenfassung zur Seite Nr. 9
Section 3 - Installation Diagram Installation Diagram D-Link DSL-540B ADSL+ 4-Port Router User Manual 9
Inhaltszusammenfassung zur Seite Nr. 10
Section 4 - Configuring Your Computer Configuring Your Computer Prior to accessing the router through the LAN port, note the following necessary configurations: • Your PC’s TCP/IP address: 19.168.1.x (where “x” is any number between and 54) • The router’s default IP address: 19.168.1.1 • Subnet mask: 55.55.55.0 Below are the procedures for configuring your computer. Follow the instructions for the operating system that you are using. ® Windows 2000 ® ® These are instructions for
Inhaltszusammenfassung zur Seite Nr. 11
Section 4 - Configuring Your Computer 7. If prompted to restart your computer with the new settings, click OK. 8. After your computer restarts, click on the Network and Dial-up Connections icon again, and right click on the Local Area Connection icon and then select Properties. 9. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP) and then click on Properties. 10. In the Internet Protocol (TCP/IP) Properties dialog box, click in the radio button labele
Inhaltszusammenfassung zur Seite Nr. 12
Section 5 - Log In To The Router Log in to the Router This section will explain how to log in to your router using the following steps: 1. Launch your web browser. . Enter the URL http://19.168.1.1 in the address bar and press Enter. A login screen like the one below will be displayed after you connect to the user interface. Note: There are three account types, each requiring a different username and password. • The user account provides limited access to certain configurations (usernam
Inhaltszusammenfassung zur Seite Nr. 13
Section 6 - Home Home The home section provides configurations for general use, including a Quick Setup Wizard with steps to quickly set up your router for Internet connection. Also included in this section are LAN/WAN setup and DNS configuration. The below sections explains the setup for each. Wizard This section will explain how to quickly configure the router if your only intention is to access the Internet. ATM PVC Configuration To enable the auto-connect process, click on the box labeled
Inhaltszusammenfassung zur Seite Nr. 14
Section 6 - Home If you uncheck the DSL Auto-connect box, the resulting screen is seen below. Enter the VPI/VCI as indicated by your ISP. There is also an option to enable Quality of Service. When you are ready, click Next to continue. D-Link DSL-540B ADSL + 4-P ort Router User Manual 14
Inhaltszusammenfassung zur Seite Nr. 15
Section 6 - Home Next is the Connection Type screen where you can select the type of network protocol and encapsulation mode over the ATM PVC that your ISP has instructed you to use. The following is a PPPoA example. Click Next to continue. D-Link DSL-540B ADSL + 4-P ort Router User Manual 15
Inhaltszusammenfassung zur Seite Nr. 16
Section 6 - Home Enter the PPP username and password given by your ISP. Then decide if you will be using any features such as dial on demand, PPP IP extension, keep alive and then click on Next. D-Link DSL-540B ADSL + 4-P ort Router User Manual 16
Inhaltszusammenfassung zur Seite Nr. 17
Section 6 - Home The next step is to configure the Network Address Translation (NAT) settings. For the example, NAT will be enabled. Leave the remaining fields at their defaults and click Next to continue. D-Link DSL-540B ADSL + 4-P ort Router User Manual 17
Inhaltszusammenfassung zur Seite Nr. 18
Section 6 - Home In this section, you can configure the DSL Router IP address and Subnet Mask to make the LAN interface correspond to your LAN’s IP Subnet. If you want the DHCP server to automatically assign IP addresses, then enable the DHCP server and enter the range of IP addresses that the DHCP server can assign to your computers. Disable the DHCP server if you would like to manually assign IP addresses. Click Next to continue. D-Link DSL-540B ADSL + 4-P ort Router User Manual 18
Inhaltszusammenfassung zur Seite Nr. 19
Section 6 - Home After all WAN configurations are complete, the WAN Setup Summary screen displays all WAN settings that you have made. Check that the settings are correct before clicking on the Save/Reboot button. Clicking on Save/Reboot will save your settings and restart your router. D-Link DSL-540B ADSL + 4-P ort Router User Manual 19
Inhaltszusammenfassung zur Seite Nr. 20
Section 6 - Home WAN Configure the WAN settings as provided by your ISP. Click on the Add button if you want to add a new connection for the WAN interface and to proceed to the ATM PVC Configuration screen as seen on page 1. The ATM PVC Configuration screen allows you to configure an ATM PVC identifier (VPI and VCI) and select a service category. D-Link DSL-540B ADSL + 4-P ort Router User Manual 0
