Inhaltszusammenfassung zur Seite Nr. 1
CG-WLBARGS
Wireless 108M
Broadband Router
User Manual
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Contents WLBARGS Manual 1. Product Introduction 1.1 Package Contents................................................................................... 3 1.2 Features..................................................................................................... 3 1.3 Hardware Introduction........................................................................ 4 2. Hardware Installation 2.1 WLBARGS should be connecting to PC and modem............ 5 2.2 Installation Procedure .......
Inhaltszusammenfassung zur Seite Nr. 4
WLB C AR on GS Mt anual ents ...................................................... 30 ........................................... 33 ............................................. 34 ............................................................. 34 ................................................ 35 ........................................
Inhaltszusammenfassung zur Seite Nr. 5
Product Introduction WLBARGS Manual 1 corega ‘s WLBARGS is an advanced model of broadband Router as well as an IEEE802.11g wireless access point which can speeds up to 108Mbps. Its management interface is straightforward for ease in setting up, while it sup- ports various security features to effectively prevent hackers from attacking your networks, such as firewall, WPA, Mac Address filtering, VPN pass through, hidden ESSID and no respond to the WAN ping function. Different from the dull and
Inhaltszusammenfassung zur Seite Nr. 6
6 7 4 5 8 9 1 0 WLBARGS Manual 1.3 Hardware Introduction B a c k F r o n t B o t t o m 1 2 A P R o u t e r 3 1 1 6. Detachable Antenna 1. Power LED (Green) Indicate power status Connector 2.Status LED (Red) 7. LAN port(1-4) ON:Reboot/Hung up/FirmWare Connected with PC upgrade 8. WAN port 3. WAN LED (Green) Connected with modem ON: Connected Blink:Transmitting or receiving 9. DC IN Socket data Connect with power 4.
Inhaltszusammenfassung zur Seite Nr. 7
Hardware Installation WLBARGS Manual 2 2.1 WLBARGS should be connecting to PC and modem Following the steps below to set up WLBARGS and the connection. (1) Insert the cable connector into the Network Adapter embeded in PC, and insert the other side into one of LAN ports (1~4) of the Router. (2) Insert the connect into the WAN port of the Router and insert the other side into the WAN port of the modem. (3) Connect the Power Adapter, and plug in the AC power. Modem WAN LAN PC corega WLBARGS 2.2
Inhaltszusammenfassung zur Seite Nr. 8
WLBARGS M PC S anualetting 3 3.1 TCP/IP Configuration The following steps and screenshots maybe dissimilar in different operat- ing systems. This manual takes Windows XP/200, 95/98/ME, and Mac O/S as examples: 3.1.1 Windows XP O/S (1) Enter [Control Panel] -> click [Network Connection] -> right click and select [Open]. (2) Click [Local Area Connection] and right click and select [Properties]. 6 6 6 7 7 7
Inhaltszusammenfassung zur Seite Nr. 9
WLBARGS Manual (3) Click [General] -> click [Internet Protocol (TCP/IP), and click [Properties]. (4) Click [General], select [Obtaining an IP Address Automatically], and [Obtain DNS Server address automatically], and press [Advance]. 6 6 6 7 7 7
Inhaltszusammenfassung zur Seite Nr. 10
WLBARGS Manual (5) Click [DNS] tab, unselect [Register this connection’s address in DNS], and press [OK]. (6) Go back to [Internet Protocol TCP/IP] and press [OK]. (7) Press [OK] to close [Local Area Connection Properties]. 3.1.2 Windows 2000 O/S (1) Go to [My Computer], and enter [Control Panel], click open [Network and Dial Up Connections]. 8 8 9 9
Inhaltszusammenfassung zur Seite Nr. 11
WLBARGS Manual (2) Right click [Local Area Connection], and select [Properties] *Note: Please check if TCP/IP had been installed in the [Local Area Connection]. If not, consult [Add TCP/IP] steps in this chapter. (3) Click [Internet protocol (TCP/IP)] and click [Properties]. 8 8 9 9
Inhaltszusammenfassung zur Seite Nr. 12
WLBARGS Manual (4) Select [Obtain an IP address automatically], and [Obtain DNS server address automatically]. And click [Advance]. (5) Click [DNS] tab in [Advance TCP/IP setting] page, and unselect [Register this connection’s DNS address, and press [OK]. 10 10 11 11
Inhaltszusammenfassung zur Seite Nr. 13
WLBARGS Manual 3.1.3 Windows 98/95/ME O/S The configurations in all Windows 98/95/ME are the same, and this manual takes Windows 98 as an example. (1) Enter [Control Panel], and double click [Network]. (2) Click [Configuration] tab, and select [TCP/IP], click [Properties]. (3) Select [IP Address], and select [Obtain IP address automatically. Press [OK]. 10 10 11 11
Inhaltszusammenfassung zur Seite Nr. 14
WLBARGS Manual (4) Click [Gateway] tab, remove all the gateways, and press [OK] to close the window. (5) Go to [Network] and press [OK] to close the page. (6) The [Restart the windows] screen will pop-up, press [OK] to restart the PC. If the PC is not shown this message, restart the PC manually. 3.1.4 Mac OS 8.x~9.x O/S (1) Open the [TCP/IP] configuration from [Control Panel]. (2) Select [Ethernet Network] in the [connection methods]; select [DHCP server] in [Configuration], and close this page
Inhaltszusammenfassung zur Seite Nr. 15
WLBARGS Manual 3.2 Browser Configuration 3.2.1 Windows O/S The following examples are for Windows XP O/S, skip this chapter if you are using Windows 200/98/ME. (1) Open Internet Explorer (IE 6.0), select [Tools] menu and click [Internet Options]. If a [Dial-up Connection] window is pop-up, close it, and do not connect to the Internet now. (2) Click [Connections] tab -> select [Never dial a connection] -> click [LAN Settings]. 12 12 13 13
Inhaltszusammenfassung zur Seite Nr. 16
WLBARGS Manual (3) Unselect all three options in the [Local Area Network LAN Setting]. (4) Press [OK] in the [Internet Options]. 3.2.2 Mac O/S (1) Open Internet Explorer (IE 5.0) Go to [Edit] in the menu bar, select [Internet Explorer Preferences]. (2) Select [Proxies] options in [Network] on the left-side configuration items. (3) Do not select [Web Proxy], press [OK]. 14 14 14 15 15 15
Inhaltszusammenfassung zur Seite Nr. 17
Network Configuration WLBARGS Manual 4 4.1 Quick Network Configuration Basic configuration is required before connection your computer to the inter- net via WLBARGS. The connection methods may be differed by your contract to the ISP. Please reconfirm your connection conditions with your ISP prior to configure this router. The configuration procedures are as follow: *Note: Anti-virus or Firewall software may prevent this router from being set-up properly. Please close such software through out
Inhaltszusammenfassung zur Seite Nr. 18
WLBARGS Manual (5) Please select your region. e.g.) Singapore. Click on [Save]. (6) Click [Quick Installation Setting], and click [Next] to enter the Setup Wizard. (7) When seeing this screen shot, click on [Next]. 16 16 17 17
Inhaltszusammenfassung zur Seite Nr. 19
WLBARGS Manual (8) Select your connection type. Please make sure that your ADSL connection type is correct as you enter; the correct information can be obtained from the documents given by your ISP. If not, consult with your ISP before setting. 4.1.1 Auto obtain IP (DHCP) (1) If you are subscribing to auto obtain IP service ( or DHCP Dynamic IP) from your ISP, such as Cable Modem that obtain an IP automatically for connection, please select [Auto obtain IP(DHCP)]. Click on [Next]. 16 16 17
Inhaltszusammenfassung zur Seite Nr. 20
WLBARGS Manual (2) Press [Mac address clone] to obtain the Ethernet card’s Mac address. Then press [Next]. (3) Click on [Save] to perform connection tests. 18 18 19 19
