Inhaltszusammenfassung zur Seite Nr. 1
Patch Release Note
Patch 86222-10
For Rapier Switches and AR800 Series
Modular Switching Routers
Introduction
This patch release note lists the issues addressed and enhancements made in
patch 86222-10 for Software Release 2.2.2 on existing models of Rapier L3
managed switches and AR800 Series L3 modular switching routers. Patch file
details are listed in Table 1.
Table 1: Patch file details for Patch 86222-10.
86s-222.rez
Base Software Release File
29-Nov-2001
Patch Release Date
86222-10.paz
Inhaltszusammenfassung zur Seite Nr. 2
2 Patch Release Note PCR: 01264 Module: SWI Network affecting: No Some switch chip register settings have been optimised to improve the provision of CoS with the newer revision of switching silicon. Features in 86222-09 Patch file details for Patch 86222-09 are listed in Table 2. Table 2: Patch file details for Patch 86222-09. 86s-222.rez Base Software Release File 27-Nov-2001 Patch Release Date 86222-09.paz Compressed Patch File Name 295444 bytes Compressed Patch File Size Patch 86222-09 inclu
Inhaltszusammenfassung zur Seite Nr. 3
Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers 3 PCR: 01248 Module: SWI Network affecting: No A configuration problem prevented trunking of gigabit ports at 100Mbit speeds. This issue has been resolved. The A39 gigabit copper uplink reverted to autonegotiation after a restart, even if it was configured to a fixed speed. This issue has been resolved. When the port has been configured for a fixed speed, the mode is now set to MDIX, not MDI. PCR: 01254 Module: PRI
Inhaltszusammenfassung zur Seite Nr. 4
4 Patch Release Note PCR: 01237 Module: SWI Network affecting: No The dot1dBridge MIB implementation now complies with RFC1493. Features in 86222-07 Patch file details for Patch 86222-07 are listed in Table 4: Table 4: Patch file details for Patch 86222-07 86s-222.rez Base Software Release File 26-Oct-2001 Patch Release Date 86222-07.paz Compressed Patch File Name 250468 bytes Compressed Patch File Size Patch 86222-07 includes all issues resolved and enhancements released in previous patches fo
Inhaltszusammenfassung zur Seite Nr. 5
Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers 5 PCR: 01197 Module: Q931 Network affecting: No Debug messages are no longer generated when a Q.931 Advise of Charge Notification message is received. PCR: 01198 Module: TCP Network affecting: No TCP sessions would get stuck in the FINWAIT2 state if the remote host did not send a FIN message when required. The router now starts a timer when a TCP session enters the FINWAIT2 state and will automatically close the se
Inhaltszusammenfassung zur Seite Nr. 6
6 Patch Release Note PCR: 01213 Module: TRG, SNMP Network affecting: No The Trigger Facility was generating a trap with variable { 0 0 }, and was not documented in the ATI enterprise MIB. This issue has been resolved. The MIB object triggerLastTriggerActivated ({ enterprises(1) alliedTelesyn(207) mibObjects(8) brouterMib(4) atrouter(4) modules(4) trigger(53) 1 }) has been defined, to record the trigger number of the last trigger activated, and this variable is now transmitted in the trigger
Inhaltszusammenfassung zur Seite Nr. 7
Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers 7 PCR: 01234 Module: SWI Network affecting: No A switch port that was transmitting STP BPDUs and also mirroring its transmit traffic to the mirror port caused a fatal error. This issue has been resolved. Features in 86222-06 Patch file details for Patch 86222-06 are listed in Table 5. Table 5: Patch file details for Patch 86222-06. 86s-222.rez Base Software Release File 30-Aug-2001 Patch Release Date 86222-06.paz Com
Inhaltszusammenfassung zur Seite Nr. 8
8 Patch Release Note PCR: 01148 Module: SWI Network affecting: No A39 copper uplink modules in the Rapier G6 sometimes experienced spurious link up or link down events. This issue has been resolved. PCR: 01157 Module: CORE Network affecting: No The enterprise MIB now supports objects for power supply monitoring. PCR: 01162 Module: PKI Network affecting: No Certificates containing GeneralisedTime with the year in YYYY format are now parsed correctly. The keyUsage field of certificates is now pa
Inhaltszusammenfassung zur Seite Nr. 9
Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers 9 PCR: 01186 Module: FIREWALL Network affecting: No When large numbers of sessions were being handled the firewall would become overly aggressive in restricting new sessions. The Active TCP Opens field in the output of the SHOW FIREWALL POLICY would show a very 8 high number (42 × 10 ). This issue has been resolved. PCR: 01187 Module: IPG Network affecting: No If the IGMP table was empty and a timeout was set, a fat
Inhaltszusammenfassung zur Seite Nr. 10
10 Patch Release Note correctly when only one byte has been specified. The CRL update time is now displayed correctly in hours. If the username and password parameters are present the location parameter must be present and appear before the username and password parameters. PCR: 01165 Module: DHCP Network affecting: No The DHCP server now correctly allocates addresses to clients running Apple Open Transport 2.5.1 or 2.5.2. PCR: 01166 Module: FIREWALL Network affecting: No Both public and pri
Inhaltszusammenfassung zur Seite Nr. 11
Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers 11 PCR: 01112 Module: IPG Network affecting: No DNS response packets with corrupt length fields were causing a fatal error. This issue has been resolved. PCR: 01139 Module: IPG Network Affecting: No IP NAT caused a fatal error when an ARP wait timer timed out and tried to send a host unreachable message. This issue has been resolved. PCR: 01147 Module: STT Network affecting: No The router was restarting after a “tear
Inhaltszusammenfassung zur Seite Nr. 12
12 Patch Release Note PCR: 01131 Module: CORE Network affecting: No The SHOW CPU command sometimes displayed incorrect CPU utilisation figures. Typically a value of about 74% was reported when in fact the CPU was almost idle. This issue has been resolved. PCR: 01134 Module: GUI Network affecting: No Port parameters can now be set correctly using the Layer 3 Switch GUI. PCR: 01135 Module: GUI,INST Network affecting: No Clicking the Apply button on a Layer 3 Switch GUI page caused the switch to
Inhaltszusammenfassung zur Seite Nr. 13
Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers 13 PCR: 01119 Module: IPV6 Network affecting: No Repeated addition and deletion of an address with the VALID parameter set to or from an IPV6 interface caused a fatal error. This issue has been corrected. The VALID parameter specifies the life of the address, and defaults to INFINITE. The address is deleted when the lifetime expires. The PREF parameter specifies the time that the address is the preferred address o
Inhaltszusammenfassung zur Seite Nr. 14
14 Patch Release Note Patch 86222-10 for Software Release 2.2.2 C613-10319-00 REV J
