Inhaltszusammenfassung zur Seite Nr. 1
User’s Manual
Model # AR504
Ver. 1A
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents 1. Introduction .................................................................................................................3 1.1 Functions and Features ......................................................................................... 3 2. Hardware Installation................................................................................................... 5 2.1 Connect the Router..............................................................................
Inhaltszusammenfassung zur Seite Nr. 3
1. Introduction Congratulations on your purchase of this Broadband Router. This product is specifically designed for Small Office and Home Office needs. It provides a complete SOHO solution for Internet surfing and is easy to configure and operate even for non-technical users. Instructions for installing and configuring this product can be found in this manual. Before you install and use this product, please read this manual carefully for proper operation of this product. 1.1 Function
Inhaltszusammenfassung zur Seite Nr. 4
Security Functions • Packet Filter Supported Packet Filter allows you to control access to a network by analyzing the incoming and outgoing packets and allowing or denying them access based on the IP address of the source and destination. • Domain Filter Supported o Lets you prevent users from accessing specified domains through this device. • URL Blocking Supported o Lets you prevent users from accessing specified URLs through this device. • VPN Pass-Through o Support VPN pass-thro
Inhaltszusammenfassung zur Seite Nr. 5
2. Hardware Installation 2.1 Connect the Router Note: Prior to connecting the router, be sure to power off your computer, DSL/Cable modem, and the router. Step 1 Connect one end of a network cable to the WAN port of the router and connect the other end of the cable to the DSL/Cable modem. Step 2 With another network cable, connect one end of the cable to your computer’s network card and connect the other end to one of the LAN ports of the router. Step 3 Power on the DSL/Cable m
Inhaltszusammenfassung zur Seite Nr. 6
2.2 LED Description LED Function Color Status Description Power POWER Green On Device is powered on. indication System M1 flashes once per second to Status status Orange Blinking indicate system is active. M2 is lit indication when system is busy. On The WAN port is linked. WAN port WAN Green The WAN port is sending or activity Blinking receiving data. System is restoring to factory Reset M1 Green Flashing default settings. An active station is connected to On the corresp
Inhaltszusammenfassung zur Seite Nr. 7
2.3 Verify Connection to Router Step 1 Go to Start, Run, type command (for Windows 95/98/ME) or cmd (for Windows 2000/XP) and click OK. You will see the command prompt as below. Step 2 Type ping 192.168.1.1 and press Enter. You should get four reply responses back. Step 3 If you get Request timed out, or Destination host unreachable, double-check the network cable connection between the computer and the router and try Step 2 again. If you still encounter problem, go to the next
Inhaltszusammenfassung zur Seite Nr. 8
Step 5 Type ipconfig/renew and press Enter. You should get an IP address of 192.168.1.x (where x is a number between 2 - 254). Proceed to Section 3, Configure the Router. If you don’t get an IP address, reset the router by holding in the reset button at the back of the router for 10 seconds while it is ON and try ipconfig/renew again. Step 6 For Windows 95/98/ME go to Start, Run, type winipcfg and click OK. Step 7 Select your network card from the drop-down menu and click Release.
Inhaltszusammenfassung zur Seite Nr. 9
Step 8 After your IP address is released, click Renew. You should get an IP address of 192.168.1.x (where x is a number between 2 - 254). If you don’t get an IP address, reset the router by holding in the reset button at the back of the router for 10 seconds while it is ON and try Renew again. 9
Inhaltszusammenfassung zur Seite Nr. 10
3. Configure the Router 3.1 Setup Wizard Step 1 Open the web browser and type 192.168.1.1 in the URL Address field and press Enter. Step 2 Enter admin for the password field and click Log in. Step 3 Click on Wizard from the main menu to open the Setup Wizard. Step 4 Click Next to begin the Setup Wizard. Step 5 Select your WAN Type (Internet Connection Type) and click Next. If you are not sure what your Internet Connection Type is, please contact your Internet Service Pro
Inhaltszusammenfassung zur Seite Nr. 11
Static IP If your ISP provided you with a static IP address, select ISP assigns you a static IP address (Static IP Address) and click Next. Proceed to Step 6, Static IP. Cable Modem If you use cable modem, select Obtain an IP address from ISP automatically (Dynamic IP Address) and click Next. Proceed to Step 6, Cable Modem. Road Runner If your ISP is running Road Runner Session Management, select Dynamic IP Address with Road Runner Session Management (e.g. Telstra BigPond) an
Inhaltszusammenfassung zur Seite Nr. 12
Static IP Fill in the applicable fields according to the information provided by your ISP. Click Next when done and proceed to Step 7. Cable Modem If your ISP has provided you with a host name, enter it in the Host Name field. If your ISP requires a registered MAC Address, click on the Clone MAC button. Click Next when done and proceed to Step 7. 12
Inhaltszusammenfassung zur Seite Nr. 13
Road Runner Fill in the applicable fields according to the information provided by your ISP. Click Next when done and proceed to Step 7. DSL Fill in the applicable fields according to the information provided by your ISP. Click Next when done and proceed to Step 7. Note: Depending on the ISP, you may need to include the domain name with your account name. Example: username@sbcglobal.net 13
Inhaltszusammenfassung zur Seite Nr. 14
PPTP Fill in the applicable fields according to the information provided by your ISP. Click Next when done and proceed to Step 7. L2TP Fill in the applicable fields according to the information provided by your ISP. Click Next when done and proceed to Step 7. 14
Inhaltszusammenfassung zur Seite Nr. 15
Step 7 Click Reboot to apply your settings. Step 8 Click OK to confirm reboot. Step 9 Wait for the router to reboot and proceed to Section 4, Verify Connection Status. 15
Inhaltszusammenfassung zur Seite Nr. 16
4. Verify Connection Status 4.1 Checking the System Status View the System Status to verify your Internet connection. Step 1 Login to the router’s web configuration page and click on the Status link from the Main Menu. Step 2 Verify that the WAN Status displays valid numbers (instead of all 0’s). If you use Cable modem and you see all 0’s, click on the Renew button. If you use DSL and you see all 0’s, click on the Connect button. 16
Inhaltszusammenfassung zur Seite Nr. 17
Step 3 Once you clicked the Renew or Connect button, you should see some numbers under WAN Status. This means you have successfully established Internet connection. Note: If you still see all 0’s after clicking on the Renew or Connect button, try the troubleshooting tips at the end of this manual. 17
Inhaltszusammenfassung zur Seite Nr. 18
5. Web Configuration 5.1 Accessing the Web Configuration Utility You may configure the router through the web browser using the Web Configuration Utility. Step 1 Open the web browser and type in 192.168.1.1 and press Enter. Step 2 Enter admin for the password field and click Log in. You will see the Web Configuration Utility’s home page (System Status). You can navigate through the utility from the Main Menu located at the left side of the page. 18
Inhaltszusammenfassung zur Seite Nr. 19
5.2 Basic Setting 5.2.1 Primary Setup You can set the router’s LAN IP address and change the WAN type (Internet Connection Type) on this page. LAN IP Address: The router’s default IP address is 192.168.1.1. You can change this address to suit your existing network. WAN Type: Displays the current WAN type (Internet Connection Type) selected. Click the Change button to change the WAN type. The following describes the various WAN types supported by the router: Dynamic IP Ad
Inhaltszusammenfassung zur Seite Nr. 20
Host Name (optional): Some ISPs require a registered host name to connect to their services. Enter the host name provided by your ISP, if applicable. WAN’s MAC Address: Some ISPs require a registered MAC address to connect to their services. Either manually enter the MAC address or click the Clone MAC button. Renew IP Forever: Checking the Enable box will allow the router to automatically renew the IP address automatically when the lease time is expired. Click Save to save any change
