Inhaltszusammenfassung zur Seite Nr. 1
TE100-P21/TEW-P21G Windows 7 Installation Instruction
Hardware Installation
1. Go to http://www.trendnet.com/downloads/ to download the Windows 7 Utility. Save the file to
your desktop.
2. Right click on the file and select Extract All. Follow the wizard to uncompress the file.
3. Connect a RJ-45 Network cable from a switch/router to the LAN port of the Print Server
4. Connect the detachable antenna (for TEW-P21G only)
5. Connect the AC power adapter to the Print Server and then
Inhaltszusammenfassung zur Seite Nr. 2
c. Click Show Web Setup. d. Click on Configuration, then Wireless. Select the proper SSID and then click Save. (Enable and enter the encryption key if your wireless network is encrypted. Please contact your Network Administrator for the encryption key)(TEW-P21G only). e. Unplug the Ethernet cable and the power adapter from the print server. Wait 15 seconds, then plug the power adapter back in (TEW-P21G only).
Inhaltszusammenfassung zur Seite Nr. 3
Add the Printer to your computer 1. Double click on PSWizardSetup_v2.20.exe 2. Follow the steps to add the printer to your computer a. Select the print server, select the desired port and then click Add Printer. Note: 1. If your printer is connect to USB1, select PS-XXXXXX-U1. If your printer is connected to USB2, select PS-XXXXXX-U2. If your printer is connected to LPT, select PS-XXXXXX-P3. 2. PS-XXXXXX represents the
Inhaltszusammenfassung zur Seite Nr. 4
c. Click Next. d. Click Print Test Page. e. Click OK.
Inhaltszusammenfassung zur Seite Nr. 5
f. Click Finish. g. Repeat the above steps to add the printer to other computers on the network
Inhaltszusammenfassung zur Seite Nr. 6
Troubleshooting The PS Wizard / PS Utility is unable to see my printer server. What should I do? 1. Double check your hardware connections; make sure that the print server and printer are powered ON and are properly connected. 2. Click Discover. 3. Disable any software firewall programs (e.g. ZoneAlarm). Also, disable the built in Windows firewall program. My printer does not print the entire document. What should I do? Windows 7 1. Click on the Windows icon on the bottom lef
