Inhaltszusammenfassung zur Seite Nr. 1
HP e3000/iX Network Planning and
Configuration Guide
HP e3000 MPE/iX Computer Systems
Edition 6
Manufacturing Part Number: 36922-90043
E0801
U.S.A. August 2001
Inhaltszusammenfassung zur Seite Nr. 2
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for direct, indirect, special, incidental or consequential damages in connection with the furnishing or use of this material. Hewlett-Packard assumes no responsi
Inhaltszusammenfassung zur Seite Nr. 3
Contents 1. Network Configuration Overview Pre-Configuration Hardware Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Pre-Configuration Software Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Configuration Process Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 2. Networking Concepts Network Environment Design Considerations. . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
Contents Communication Between Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Network Boundaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 IP Network Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Completing the Internetwork Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 5
Contents 5. Introductory Screens Begin Configuration Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 Start NMMGR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Open Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Select NS Configuration . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 6
Contents 11. Configuring the Network Directory Open Network Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153 Select Update Directory Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155 Add Nodes to Network Directory File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157 Configure Path Report Data for a Node . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 7
Contents Updating From a Previous MPE/iX Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 Reconfiguration Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 B. NS X.25 Migration: NS 3000/V to NS 3000/iX Differences Between NS 3000/V and NS 3000/iX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 8
Contents D. PCI 10/100Base-TX/3000 Quick Installation Notes on Manual Speed and Duplex Mode Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . .222 Notes on Autonegotiation and Autosensing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223 Quick Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225 8
Inhaltszusammenfassung zur Seite Nr. 9
Figures Figure 2-1. Class C Address with Subnet Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Figure 2-2. Class C Address with Subnet Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Figure 2-3. Gateway Configuration Scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Figure 3-1. Internetwork Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Figure 3-2. LAN Network Ma
Inhaltszusammenfassung zur Seite Nr. 10
Figures Figure 8-4. Neighbor Gateways Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Figure 8-5. Neighbor Gateway Reachable Networks Screen . . . . . . . . . . . . . . . . . . . . . . . 137 Figure 9-1. Gateway Half Link Screen Flow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 Figure 9-2. Gatehalf Configuration Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 Figure 11-1. Network Directory C
Inhaltszusammenfassung zur Seite Nr. 11
Tables Table 2-1. Valid Addresses of Example Subnetwork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Table 2-2. Configuration Maximums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Table 3-1. Internetwork Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Table 3-2. LAN Network Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Table 3-
Inhaltszusammenfassung zur Seite Nr. 12
Tables 12
Inhaltszusammenfassung zur Seite Nr. 13
Preface This manual documents functionality for the MPE/iX releases, for HP e3000 systems. It describes the concepts and terminology needed to design an NS 3000/iX network and to plan the configuration process for that network. It also provides step-by-step instructions to assist you in configuring the network links for HP e3000 systems. Audience This manual is intended for network managers and planners who are responsible for setting up and configuring a communications network. To make the best us
Inhaltszusammenfassung zur Seite Nr. 14
Chapter 5 , “Introductory Screens,” provides step-by-step instructions for configuring NMMGR introductory screens. Chapter 6 , “Configuring a LAN Node,” provides step-by-step instructions for configuring IEEE802.3/Ethernet LAN, token ring, and Fiber Distributed Data Interface (FDDI) links. Chapter 7 , “Configuring a Point-to-Point Node,” provides step-by-step instructions for configuring Point-to-Point (router) links. Chapter 8 , “Configuring a X.25 Node,” provides step-by-step instructions for configu
Inhaltszusammenfassung zur Seite Nr. 15
Related HP The following manuals are referenced in this manual or may be of use Publications to you as you plan and configure your network. Networking • Using the Node Management Services (NMS) Utilities • Configuring and Managing Host-Based X.25 Links • Managing Host-Based X.25 Links Quick Reference Guide • NS 3000/iX NMMGR Screens Reference Manual • NS 3000/iX Operations and Maintenance Reference Manual • NS 3000/iX Error Messages Reference Manual • NetIPC 3000/XL Programmer’s Reference Manual •
Inhaltszusammenfassung zur Seite Nr. 16
16
Inhaltszusammenfassung zur Seite Nr. 17
1 Network Configuration Overview This manual provides step-by-step instructions you can use to configure an HP e3000 node for network communications. You can use the information to configure an IEEE 802.3/Ethernet, Token Ring, FDDI, 100VG-AnyLAN, 100Base-T, Point-to-Point (router), or X.25 node. Before you begin configuration, you must ensure your network is physically set up and ready for network configuration. This chapter provides information you should know before you begin configuration. It tells
Inhaltszusammenfassung zur Seite Nr. 18
Network Configuration Overview Pre-Configuration Hardware Check Pre-Configuration Hardware Check Before beginning the actual configuration process, check that the hardware components required for NS 3000/iX have been installed and verified according to the procedures in the hardware installation manuals listed in the preface to this guide. 18 Chapter1
Inhaltszusammenfassung zur Seite Nr. 19
Network Configuration Overview Pre-Configuration Software Check Pre-Configuration Software Check Once you have verified that your hardware has been correctly installed, verify that the appropriate software is installed by performing the following steps: 1. Ensure that the Datacommunications and Terminal Subsystem (DTS) has been configured. If DTS has not been configured, refer to Configuring Systems for Terminals, Printers, and Other Serial Devices and configure the DTS before proceeding. 2. Check that
Inhaltszusammenfassung zur Seite Nr. 20
Network Configuration Overview Configuration Process Overview Configuration Process Overview The instructions in this guide explain how to configure each node on your network by using a “guided” branch of Hewlett-Packard’s NMMGR configuration program. The principal steps in this process are as follows: 1. Plan your network before you begin NMMGR. Use the worksheets provided in Chapter 4 , “Planning for Node Configuration,” to record all the items NMMGR requires. (See Chapter 2 , “Networking Concepts,”
