Inhaltszusammenfassung zur Seite Nr. 1
LR0202A-KIT
G.SHDSL Four-Wire Ethernet Network Extender Kit
Extend Ethernet with full-duplex transmission
®
BL A CK BOX
up to 10.8 Mbps over two pairs of copper.
Complies with ITU-T Rec. G.991.2 G.shdsl.bis standards.
Reaches distances up to 22,500 feet over 26 AWG twisted-pair cable.
Rate adaptive from 192 kbps to 4.608 Mbps on one pair or 384 kbps
to 9.216 Mbps on two pairs.
Has two RJ-45 connectors for 10BASE-T/100BASE-TX Ethernet ports
for combining two separate Ethernet data streams ov
Inhaltszusammenfassung zur Seite Nr. 2
G.SHDSL Four-Wire Ethernet Network Extender Kit Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners. We‘re here to help! If you have any questions about your application or our products, contact Black Box Tech Support at 724-746-5500 or go to blackbox.com and click on “Talk to Black Box.” You’ll be live with one of our t
Inhaltszusammenfassung zur Seite Nr. 3
FCC and IC RFI Statements Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 o
Inhaltszusammenfassung zur Seite Nr. 4
G.SHDSL Four-Wire Ethernet Network Extender Kit Normas Oficiales Mexicanas (NOM) Electrical Safety Statement INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4. Todas las instrucciones de operación y
Inhaltszusammenfassung zur Seite Nr. 5
CE Statement European Community (CE) Electromagnetic Compatibility Directive This equipment has been tested and found to comply with the protection requirements of European Emission Standard EN55022/EN61000-3 and the Generic European Immunity Standard EN55024. EMC: EN55022(2003)/CISPR-2( 2002): Class A IEC61000-4-2 (2001): 4 KV CD, 8 KV AD IEC61000-4-3( 2002): 3 V/m IEC61000-4-4(2001): 1 KV (power line), 0.5 KV (signal line) 724-746-5500 | blackbox.com Page 5
Inhaltszusammenfassung zur Seite Nr. 6
G.SHDSL Four-Wire Ethernet Network Extender Kit 1. Specifications ......................................................................................................................................................................................... 7 2. Overview ............................................................................................................................................................................................. 8 2.1 Introduction .................
Inhaltszusammenfassung zur Seite Nr. 7
Chapter 1: Specifications 1. Specifications Standards: ITU-T G.991.2 Compliance, TCPAM-16 Level Line Code, IEEE 802.3/IEEE 802.3u, EMI emissions standard, FCC Part 15 Class A, CE Mark Adaptive Data Rate: 1-pair SHDSL mode: 4.608 Mbps to 192 kbps; 2-pair SHDSL mode: 9.216 Mbps to 384 kbps Fixed Data Rate: 1-pair SHDSL mode: 64 kbps to 5.696 Mbps; 2-pair SHDSL mode: 128 kbps to 10.8 Mbps Maximum Distance: Table 2-1. Fixed data rates (1-pair and 2-pair) and maximum distances on 26 AWG t
Inhaltszusammenfassung zur Seite Nr. 8
G.SHDSL Four-Wire Ethernet Network Extender Kit 2. Overview 2.1 Introduction The LR0202A-KIT, a G.SHDSL (Single-pair High-bit-rate Digital Subscriber Line) Ethernet Network Extender, provides broadband full-duplex transmission with bandwidth aggregation up to 10.8 Mbps over two pairs of copper line for point-to-point LAN con- nectivity between two Ethernet networks. This is enough speed to support VoIP, Web hosting, and teleconferencing. The kit includes two extenders. The LR0202A-KIT can be
Inhaltszusammenfassung zur Seite Nr. 9
Chapter 2: Overview 2.3. Application LR0202A-KIT LR0202A-KIT (Remote Site—Slave) (CO Site—Master) Ethernet Switch Ethernet Switch LAN LAN Internet Figure 2-1. Sample application. 2.4 What’s Included Your package should include the following items. If anything is missing or damaged, please contact Black Box Technical Support at 724-746-5500. • (2) G.SHDSL Four-Wire Ethernet Network Extenders • (2) Power cords • (2) CAT5e Ethernet cables • This user’s manual on CD-ROM 2.5 LED Description
Inhaltszusammenfassung zur Seite Nr. 10
G.SHDSL Four-Wire Ethernet Network Extender Kit 2.6 Front and Back Panels LED Indicators RS-232 Console Port Figure 2-2. Front panel. Power Input RJ-48 Connector RJ-45 Connectors Power Switch Figure 2-3. Rear panel. Page 10 724-746-5500 | blackbox.com
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 3: Installation 3. Installation 1. Connect the SHDSL line to the DSL RJ-48 connector on the LR0202A-KIT rear panel. Pins 4 and 5 for SHDSL line Loop 1 Pins 1 and 2 for SHDSL line Loop 2 Figure 3-1. RJ-48 connector, Pins 4 and 5 and Pins 1 and 2. 2. Connect the Ethernet interface to the RJ-45 Port with the included CAT5 cable. 3. Connect the included power cord to the AC outlet. CAUTION: Verify that the AC-DC adapter conforms to your country’s AC power requirement and then insert t
Inhaltszusammenfassung zur Seite Nr. 12
G.SHDSL Four-Wire Ethernet Network Extender Kit 4. Console Configuration The LR0202A-KIT provides an RS-232C console port for user to monitor the OA&M status through a VT100 terminal. This section covers the operating procedures and settings for all screen selections. Connect the RS-232 cable to the computer’s COM port as shown in Figure 4-1. Set the personal computer to VT100 or VT102 type through HyperTerminal. Press the key and the main menu will be shown on the terminal’s screen
Inhaltszusammenfassung zur Seite Nr. 13
Chapter 4: Console Configuration 4.1. Main Menu The Main Menu screen enables you to access the LR0202A-KIT unit’s Configuration and Status screens. For details, refer to Figure 4-2. Welcome to G. Shdsl Ethernet Network Extender User Interface Main Menu 1. Configuration 2. Status Select (1-2) [ENTER] select Figure 4-2. Main menu. The main menu’s pull-down tree structure is shown in Figure 4-3. DSL Mode DSL Speed Configuration Default Configuration Main Menu System Information Status Syste
Inhaltszusammenfassung zur Seite Nr. 14
G.SHDSL Four-Wire Ethernet Network Extender Kit 4.2. Configuration Screen The Configuration screen will display the LR0202A-KIT unit’s connection selections. The screen includes three settings selections: DSL Mode, DSL Speed, and Default Configuration. Configuration 1. DSL Mode 2. DSL Speed 3. Default Configuration Select (1-3): [ENTER] select Figure 4-4. Configuration screen. 4.2.1. DSL Mode Screen From the DSL Mode screen, users can update the DSL mode settings. The DSL Mode settings’ in
Inhaltszusammenfassung zur Seite Nr. 15
Chapter 4: Console Configuration CO/RT: CO/RT has 2 options: STU-C and STU-R. To establish a successful connection for two G.SHDSL Two-Wire Ethernet Network Extenders, set one unit to STU-C (CO Site) and the other unit to STU-R (Remote Site). 2P/1P: 2P/1P has 2 options: 1 Pair and 2 Pairs. LR0202A-KIT supports both 1-pair and 2-pair SHDSL applications. To establish a successful connection for LR0202A-KIT, set the two units to the same selection. 4.2.2. DSL Speed Screen From the DSL Speed scree
Inhaltszusammenfassung zur Seite Nr. 16
G.SHDSL Four-Wire Ethernet Network Extender Kit 4.2.3. Default Configuration Screen When Default Configuration is selected, all the settings of the LR0202A-KIT will go back to default settings. In the screen shown in Figure 4-7, the setting is finished. Press the key to go back to the previous screen. The LR0202A-KIT’s default set- tings are: STU-C 2 Pair Adaptive speed Now the setting are STU-C, 2 Pair, and Adaptive Speed. Press [ESC] to quit [ENTER] quit Figure 4-7. Default Configura
Inhaltszusammenfassung zur Seite Nr. 17
Chapter 4: Console Configuration 4.3. Status Screen The Status screen shows the LR0202A-KIT’s connection status. The screen covers two selections: System Information and System Status. Status 1. System Information 2. System Status Select (1-2): [ENTER] select [ESC] quit Figure 4-8. Status screen. 4.3.1 System Information Screen Firmware Version: Indicates the firmware version in this unit. Vendor Model: Indicates this device’s vendor model name. Vendor Information: Indicates the vendor
Inhaltszusammenfassung zur Seite Nr. 18
G.SHDSL Four-Wire Ethernet Network Extender Kit 4.3.2. System Status Screen DSL mode: Indicates the current DSL mode setting. Speed setting: Indicates the current DSL speed setting. Speed actual (kbps): Indicates the actual DSL speed in kilobits per second. Link status of Pair #1: Indicates the DSL connection status (either up or down) for Pair #1. Link status of Pair #2: Indicates the DSL connection status (either up or down) for Pair #2. Noise margin of Pair #1 (dB): Indicates the noise m
Inhaltszusammenfassung zur Seite Nr. 19
NOTES Page 19 724-746-5500 | blackbox.com
Inhaltszusammenfassung zur Seite Nr. 20
Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Great tech support is just 30 seconds away at 724-746-5500 or blackbox.com. About Black Box Black Box Network Services is your source for an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 30 seconds or less. © Copyri
