Inhaltszusammenfassung zur Seite Nr. 1
GA-8ANXP-D
® ®
Intel Pentium 4 LGA775 Processor Motherboard
User's Manual
Rev. 2002
12ME-8ANXPD-2002
Inhaltszusammenfassung zur Seite Nr. 2
Motherboard GA-8ANXP-D Motherboard GA-8ANXP-D Jun. 11, 2004 Jun. 11, 2004
Inhaltszusammenfassung zur Seite Nr. 3
Copyright © 2004 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in the manual are legally registered to their respective companies. Notice The written content provided with this product is the property of Gigabyte. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without Gigabyte's prior written permission. Specifications and features are subject to change without prior notice. Product Manual Classification In
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents GA-8ANXP-D Motherboard Layout ............................................................................... 6 Block Diagram ............................................................................................................... 7 Chapter 1 Hardware Installation ................................................................................... 9 1-1 Considerations Prior to Installation ................................................................. 9 1-2 Feature Sum
Inhaltszusammenfassung zur Seite Nr. 5
Chapter 3 Drivers Installation ..................................................................................... 49 3-1 Install Chipset Drivers ................................................................................... 49 3-2 Software Applications .................................................................................... 50 3-3 Driver CD Information ................................................................................... 50 3-4 Hardware Information .............
Inhaltszusammenfassung zur Seite Nr. 6
GA-8ANXP-D Motherboard Layout VRM_CONN KB_MS SPDIF_O LGA775 SPDIF_I PWR_FAN ATX ATX_12V AUDIO1 Intel 925X CPU_FAN AUDIO2 Marvell NB_FAN 8001 IDE AZALIA_FP FDD PCIE_16 Broadcom SATA3_SB 5751 SATA2_SB PCIE_1 BAT CODEC SATA1_SB Main Intel ICH6R SATA0_SB PCIE_2 CD_IN BIOS TSB82AA2 Backup PCIE_3 BIOS TSB81BA3 F_PANEL IR PCI1 SiI3114 CY7C6564D PWR_LED PCI2 F_USB3 F_USB2 F_USB1 F2_1394 F1_1394 - 6 - USB USB COM LPT LAN2 LAN1 IT8712 GA-8ANXP-D DDRII1 DDRII2 DDRII3 F_USB4 SATA0_SII DDRII4 SATA1_SII DDRII
Inhaltszusammenfassung zur Seite Nr. 7
Block Diagram PCI-ECLK (100MHz) CPUCLK+/-(200/133MHz) LGA775 Processor Host Interface (Note) DDRII 600 /533/400MHz DIMM PCI Express x16 Intel 925X Dual Channel Memory 3 PCI Express x 1 Ports MCH MCHCLK (133/200MHz) PCI-ECLK 66MHz (100MHz) 33MHz RJ45 14.318MHz 48MHz Broadcom 5751 Dual BIOS 4 Serial ATA PCI Express x 1 Bus Intel 4 Serial ATA PCI Bus SiI3114 ICH6R ATA33/66/100 IDE Channels TSB82AA2 Marvell 8001 TSB81BA3 Floppy LPT Port RJ45 IT 8712 CODEC COM Port 24MHz PS/2 KB/Mouse 8 USB Ports 33M
Inhaltszusammenfassung zur Seite Nr. 8
- 8 -
Inhaltszusammenfassung zur Seite Nr. 9
English Chapter 1Hardware Installation 1-1 Considerations Prior to Installation Preparing Your Computer The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please follow the instructions below: 1. Please turn off the computer and unplug its power cord. 2. When handling the motherboard, avoid touching any metal leads or connectors. 3. It is best to wear an electrostatic d
Inhaltszusammenfassung zur Seite Nr. 10
1-2 Feature Summary ® ® CPU Supports the latest Intel Pentium 4 LGA775 CPU Supports 800/533MHz FSB L2 cache varies with CPU ® Chipset Northbridge: Intel 925X Express Chipset ® Southbridge: Intel ICH6R (Note 1) Memory 6 DDR II DIMM memory slots (supports up to 4GB memory) (Note 2) Supports dual channel DDR II 600 /533/400 unbrffered DIMM Supports 1.8V DDR II DIMM Slots 1 PCI Express x 16 slot 3 PCI Express x 1 slots 2 PCI slots IDE Connections 1 IDE connection (UDMA 33/ATA 66/ATA 100
Inhaltszusammenfassung zur Seite Nr. 11
English I/O Control IT8712 Hardware Monitor System voltage detection CPU temperature detection CPU / System / Power fan speed detection CPU warning temperature CPU / System / Power fan failure warning CPU smart fan control Onboard SATA RAID Onboard ICH6R chipset (SATA0_SB, SATA1_SB, SATA2_SB, SATA3_SB) - supports data striping (RAID 0) or mirroring (RAID 1) function - supports data transfer rate of up 150 MB - supports hot plugging function - supports a maximum of 4 SATA connections - su
Inhaltszusammenfassung zur Seite Nr. 12
1-3 Installation of the CPU and Heatsink Before installing the CPU, please comply with the following conditions: 1. Please make sure that the motherboard supports the CPU. 2. Please take note of the one indented corner of the CPU. If you install the CPU in the wrong direction, the CPU will not insert properly. If this occurs, please change the insert direction of the CPU. 3. Please add an even layer of heat sink paste between the CPU and heatsink. 4. Please make sure the heatsink is installed
Inhaltszusammenfassung zur Seite Nr. 13
English 1-3-2 Installation of the Heatsink Male Push Pin The top of Female Push Pin Female Push Pin Fig.1 Fig. 2 Please apply an even layer of heatsink paste on (Turning the push pin along the direction of arrow is the surface of the installed CPU. to remove the heatsink, on the contrary, is to install.) Please note the direction of arrow sign on the male push pin doesn't face inwards before installation. (This instruction is only for Intel boxed fan) Fig. 3 Fig. 4 Place the heatsink atop the CP
Inhaltszusammenfassung zur Seite Nr. 14
1-4 Installing/Removing Cool-Plus (Northbridge Cooling Fan) Fig.1 Fig.2 To attach Cool-Plus to Once the fan is properly a heatsink, align the affixed onto the extensions on both heatsink, plug the sides with the grooves power cable into the in the heatsink as NB_FAN connector. shown. Firmly press down until it snaps into position. Fig.3 Before proceeding, first check to make sure that the fan's power cable is disconnected. Then, while applying pressure to the top of the fan, carefully use a scr
Inhaltszusammenfassung zur Seite Nr. 15
English Fig.1 The DIMM socket has a notch, so the DIMM memory module can only fit in one direction. Insert the DIMM memory module vertically into the DIMM socket. Then push it down. Fig.2 Close the plastic clip at both edges of the DIMM sockets to lock the DIMM module. Reverse the installation steps when you wish to remove the DIMM module. Dual Channel DDR II GA-8ANXP-D supports the Dual Channel Technology. After operating the Dual Channel Technology, the bandwidth of Memory Bus will add double
Inhaltszusammenfassung zur Seite Nr. 16
1-6 Installation of Expansion Cards You can install your expansion card by following the steps outlined below: 1. Read the related expansion card's instruction document before install the expansion card into the computer. 2. Remove your computer's chassis cover, screws and slot bracket from the computer. 3. Press the expansion card firmly into expansion slot in motherboard. 4. Be sure the metal contacts on the card are indeed seated in the slot. 5. Replace the screw to secure the slot bracket of
Inhaltszusammenfassung zur Seite Nr. 17
English 1-7 I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse Connector To install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the lower port (purple). Parallel Port The parallel port allows connection of a printer, scanner and other peripheral devices. SPDIF_O (SPDIF Out) The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital Decoder. SPDIF_I (SPDIF In) Use SPDIF In
Inhaltszusammenfassung zur Seite Nr. 18
Center/Subwoofer Speaker Out Connect the Center/Subwoofer speakers to this connector. Side Speaker Out Connect the side surround speakers to this connector. You can use audio software to configure 2-/4-/6-/8-channel audio functioning. 1-8 Connectors Introduction 13 5 2 6 13 8 7 18 19 4 14 9 17 11 16 15 10 12 1) ATX_12V 11) PWR_LED 2) ATX (Power Connector) 12) F_PANEL 3) CPU_FAN 13) AZALIA_FP 4) SYS_FAN 14) CD_IN 5) PWR_FAN 15) F_USB1 / F_USB2 / F_USB3 / F_USB4 6) NB_FAN 16) F1_1394 / F2_1394 7)
Inhaltszusammenfassung zur Seite Nr. 19
English 1/2) ATX_12V/ATX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed. Align the power connector with its proper location on the motherboard and connect tightly. The ATX_12V power connector mainly supplies power to the CPU. If the ATX_12V power connector is not connected, the system will
Inhaltszusammenfassung zur Seite Nr. 20
3/4/5) CPU_FAN / SYS_FAN / PWR_FAN (Cooler Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin(only for CPU_FAN) power connector and possesses a ful-proof connection design. Most coolers are designed with color-coded power connector wires. A red power connector wire indicates a positive connection and requires a +12V power voltage. The black connector wire is the ground wire (GND). Please remember to connect the power to the cooler to prevent syste
