Inhaltszusammenfassung zur Seite Nr. 1
1- Port Print Server
(USB 2.0)
Users Manual
Model #: APS-U2001
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS 1. INTRODUCTION...............................................................................................4 PRODUCT OVERVIEW...............................................................................................................4 COMPONENTS AND FEATURES..............................................................................................4 HARDWARE INSTALLATION.............................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
IPX/SPX-COMPATIBLE PROTOCOL INSTALLATION.............................................................49 NETBEUI PROTOCOL INSTALLATION....................................................................................50 WINDOWS 95/98/ME/NT/2000/XP/2003 MANUAL INSTALLATION PROCEDURE.................50 UNINSTALLING NETWORK PRINT PORT ON WINDOWS 95/98/ME/NT/2000/XP/2003.......52 7. TCP/IP LPR PORT PRINTING INSTALLATION.............................................53 BASIC TCP/IP INSTALLATI
Inhaltszusammenfassung zur Seite Nr. 4
Trademarks NetWare is a registered trademark of Novell Inc and Windows 95/98/Me and Windows NT/2000/XP/2003 are registered trademarks of Microsoft Corp. All other brands and product names are trademarks of their respective companies. Copyright No part of this publication may be reproduced in any form or by any means or used to make any derivative (such as translation, transformation or adaptation) without the express written consent of the manufacturer as stipulated by the United Stat
Inhaltszusammenfassung zur Seite Nr. 5
1. Introduction Product Overview The external print servers enhance capability by letting you place your printers at convenient locations directly on the Ethernet network, and by increasing network printer performance and management. Please note that the print server does not support printing with host-based printers, e.g. CAPT, GDI, PPA. Network Management The print servers support the Simple Network Management Protocol (SNMP), which remote printer management and a warning. A standa
Inhaltszusammenfassung zur Seite Nr. 6
Status Blinking for When power switched on, the Status POST (Yellow) indicator will flash five times, and then on. 100Mbps On (Green) LAN Port has a valid network connection at 100Mbps. 10Mbps On (Yellow) LAN Port has a valid network connection at 10Mbps. USB On (Green) Connect with USB1.1 printer On (Yellow) Connect with USB2.0 printer Before you start, you should prepare the following items: One Windows-based computer with print server setup CD One printer One
Inhaltszusammenfassung zur Seite Nr. 7
Network Environment Wired Network with Print Server: 2. Print Server Installation Preparation To meet users’ network printing needs in today’s heterogeneous and multiple protocol networking environments, the print server supports industrial standard protocols, including TCP/IP, IPX/SPX, NetBEUI and AppleTalk. This means that the print server supports the most popular network operating systems today, including NetWare, Windows 95/98/Me/NT/2000/XP/2003, UNIX systems and Macint
Inhaltszusammenfassung zur Seite Nr. 8
Setup Operating Function Remarks System PSAdmin utility / Setup Wizard Windows 95/98/Me Install a single network Easy printer installation Windows on a peer-to-peer or runs from print server NT/2000/XP/2003 client-server network setup CD Embedded Web server Windows 95/98/Me Remote setup print Follow standard Windows server from private browse, e.g. IE or NT/2000/XP/2003 LAN Netscape Mac OS, Linux… HP Web JetAdmin Windows Remote Print server solution for continual ma
Inhaltszusammenfassung zur Seite Nr. 9
3. Software Installation The PSAdmin is a proprietary Windows-based management program that can assist you in configuring and managing your print server in NetWare environments. The program can be installed from the setup CD of print server. Installing the PSAdmin and Print Server’s Driver 1. To enable network communication with print server, your computer must have a proper IP address, e.g. 192.168.0.100 (the print server’s default IP is 192.168.0.10) 2. Insert the setup CD into your
Inhaltszusammenfassung zur Seite Nr. 10
Note: The setup CD will install the print server’s driver, PSAdmin and Setup Wizard into your computer. The default installation directory will be C:\Program files\Network Print Monitor. 4. Click Next, the wizard will automatically discover the print server. 5. From the Select A Print Sever screen, select the print server and its port number that you want to configure and click Next.
Inhaltszusammenfassung zur Seite Nr. 11
6. On the Change Settings screen, select No or Yes: Click No if you want the print server to keep using the default IP address and keep the default settings: IP address: 192.168.0.10 Subnet Mask: 255.255.255.0 Click Yes if you want change IP address to the print server, and then click Next. Note: The IP address of print server must be within the same subnet as your network adapter. 7. In the setup wizard, select an already configured printer from the list, click Next, Next a
Inhaltszusammenfassung zur Seite Nr. 12
8. Click Add New Printer to launch Windows Add Printer Wizard. 9. Click Next and select Local Printer, make sure the Automatically detect and install my Plug and Play printer check box is NOT checked. Then click Next.
Inhaltszusammenfassung zur Seite Nr. 13
10. Make sure the Use the following port radio-button is clicked and select LPT1: (recommended Printer Port) from the pull-down list. Then click Next. 11. Select Manufacturer and Printer from the lists of printer’s driver. Then click Next.
Inhaltszusammenfassung zur Seite Nr. 14
12. If you already have the printer’s driver installed, you will be asked whether to keep it or to replace it. Click Next. Supply a name for the printer and choose whether you want to make it your default printer. Then click Next. 13. Then, choose whether you want to share the printer with other network user, print a test page (please select No.), etc. Select the appropriate radio-button and click Next and Finish. 14. In the setup wizard, finish the installation by highlighting the in
Inhaltszusammenfassung zur Seite Nr. 15
15. From Windows system, go to start -> Printers and Faxes and highlight your newly installed printer. 16. Right-click, select Properties -> Ports and verify that the print server’s port appears.
Inhaltszusammenfassung zur Seite Nr. 16
17. Go to General; click Print Test Page to verify the configuration. 18. Done. Note: If you want to install more print servers, start setup wizard from your Windows Start menu: start - > All Programs -> Network Print Server -> PSWizard and repeat the installation procedure. Using PSAdmin After the software of setup CD is successfully installed, starts PSAdmin utility from your Windows Start menu: start -> All Programs -> Network Print Server -> PSAdmin. The screen will then ap
Inhaltszusammenfassung zur Seite Nr. 17
All print server(s) feature Novell NetWare function on the LAN will be displayed along with their respective device name, MAC Address, print server name, firmware version, and status. The terms are defined as follows: Device Name: The name of the print server hardware used for identification purposes. MAC Address: The Ethernet address of the print server. Print server Name: The print server to which the device is attached. Version: The firmware version of the print server. Status:
Inhaltszusammenfassung zur Seite Nr. 18
2 Select “Obtain an IP address from DHCP server”. If there is a DHCP server on your network. This option allows the print server to obtain IP-related settings automatically from your DHCP server. This setting, by default, is disabled. If you would like to manually specify an IP address to the device, please skip to the following step. 3 In the IP Address option, type an IP address for the print server. The IP address must meet the IP addressing requirements of the network segment. 4 (O
Inhaltszusammenfassung zur Seite Nr. 19
3. Select the NetWare File Server to which the print server device will be attached. 4. Type in a Print server. 5. Type in a Print Queue Names. Note: Each print queue corresponds to each print port of the print server. 6. Click OK. 7. Done. 8. From your NetWare client computer, such as Windows 95/98/Me, create a printer that is connected (redirected) to one of the NetWare print queues serviced by the print server. Manual Setup Manual Setup is a configuration program designed f
Inhaltszusammenfassung zur Seite Nr. 20
7. (Optional) In NDS Settings, Select NetWare file server(s), NetWare 4.x or later that print server can do NDS mode. 8. Click OK. From your NetWare client computer, such as Windows 95/98/Me, create a printer that is connected (redirected) to one of the NetWare print queues serviced by the print server. Properties –TCP/IP Options The TCP/IP options allow you to modify the print server’s TCP/IP settings. Each option is detailed as follows. Obtain an IP address from a DHCP server:
