Inhaltszusammenfassung zur Seite Nr. 1
SmartSwitch 9000
9E428-12/36 and 9E429-12/36
Local Management Appendix
9032034-01
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Appendix 9E428-12/36 and 9E429-12/36 Module Specific Information Introduction This appendix contains local management information that is specific to the following Ethernet modules: • 9E428-12 (12 Ports, Multimode Fiber, ST connectors) • 9E428-36 (36 Ports, Multimode Fiber, ST connectors) • 9E429-12 (12 Ports, Single-Mode Fiber, ST connectors) • 9E429-36 (36 Ports, Single-Mode Fiber, ST connectors) The 9E428-12 and 9E429-12 Ethernet Modules are 13-port switching modules with: • 12 front p
Inhaltszusammenfassung zur Seite Nr. 4
9E428-12/36 and 9E429-12/36 Module Specific Information Modifying Fields and User Privileges To modify fields on these modules, you must have read-write or super-user privileges. If you have read-only privileges, you can view information; however, you cannot modify any fields. For more information about user privileges and community names, see the SmartSwitch 9000 Module Local Management User’s Guide. Module Interface Codes The 9E428-36 and 9E429-36 Ethernet Modules have 41 interfaces
Inhaltszusammenfassung zur Seite Nr. 5
9E428-12/36 and 9E429-12/36 Module Specific Information Table 1. 9E428-36 and 9E429-36 Module Interface Codes (Continued) Interface Interface Interface Number Name Description 18 ENET13 Ethernet Front Panel Port 13 19 ENET14 Ethernet Front Panel Port 14 20 ENET15 Ethernet Front Panel Port 15 21 ENET16 Ethernet Front Panel Port 16 22 ENET17 Ethernet Front Panel Port 17 23 ENET18 Ethernet Front Panel Port 18 24 ENET19 Ethernet Front Panel Port 19 25 ENET20 Ethernet Front Panel Port 20 26 ENET
Inhaltszusammenfassung zur Seite Nr. 6
9E428-12/36 and 9E429-12/36 Module Specific Information Full Duplex Configuration Screen The 9E428-12/36 and 9E429-12/36 Full Duplex Configuration Screen (Figure 1), displays the port number, operation mode, link status, and port status of the module’s ports (12 ports at a time). SmartSwitch 9000 Local Management Full Duplex Configuration Module Name: 9E428-36 Firmware Revision: 01.04.07 Slot Number: 9
Inhaltszusammenfassung zur Seite Nr. 7
9E428-12/36 and 9E429-12/36 Module Specific Information Full Duplex Configuration Screen Fields The following information briefly explains each Full Duplex Configuration Screen field. OPERATION MODE (Modifiable) Indicates whether the specified port will transmit and receive data separately or simultaneously. You can set this field to one of the following values: • STANDARD ENET - The port can either transmit data or receive data, but not both at the same time. Therefore, the port is runn
Inhaltszusammenfassung zur Seite Nr. 8
9E428-12/36 and 9E429-12/36 Module Specific Information Displaying Information About Other Ports To display information about other ports: 1. Use the arrow keys to highlight one of the following fields (located at the bottom of the Full Duplex Configuration Screen): • [1-12] (for the first 12 ports) • [13-24] (for the next 12 ports, if applicable) • [25-36] (for the last 12 ports, if applicable) 2. Press the Return key. Setting One Ethernet Port to Full Dupl
Inhaltszusammenfassung zur Seite Nr. 9
9E428-12/36 and 9E429-12/36 Module Specific Information Switch Configuration Screen The 9E428-12/36 and 9E429-12/36 Switch Configuration Screen (Figure 2), provides basic setup options for making a switch operational in your network. SmartSwitch 9000 Local Management Switch Configuration Module Name: 9E428-36 Firmware Revision: 01.04.07 Slot Number: 9 BOOTPROM Revision: 01.01.01
Inhaltszusammenfassung zur Seite Nr. 10
9E428-12/36 and 9E429-12/36 Module Specific Information Switch Configuration Screen Fields The following information briefly explains each Switch Configuration Screen field. Type of STA (Toggle) Allows you to set the method that switches use to decide which switch is the controlling (Root) switch when two or more switches exist in parallel (Spanning Tree Algorithm). Press the Space Bar to toggle to the desired value. Valid types are: • DEC • IEEE • NONE All switches in a network must use the same
Inhaltszusammenfassung zur Seite Nr. 11
9E428-12/36 and 9E429-12/36 Module Specific Information Status (Toggle) Allows you to set the forwarding status of the listed interface (either ENABLED or DISABLED). Press the Space Bar to toggle to the desired value. Valid entries are: • ENABLED • DISABLED Displaying Other Ports To display other ports: 1. Use the arrow keys to highlight one of the following fields (located at the bottom of the Switch Configuration Screen): • [ 9-16 ] - for ports 9 through 16 • [ 17-24 ] - for ports 17 through 2
Inhaltszusammenfassung zur Seite Nr. 12
9E428-12/36 and 9E429-12/36 Module Specific Information Port Statistics Screen The 9E428-12/36 and 9E429-12/36 Port Statistics Screen (Figure 3), displays information and statistics about the module’s Ethernet ports. SmartSwitch 9000 Local Management Port Statistics Module Name: 9E428-36 Firmware Revision: 01.04.07 Slot Number: 9 BOOTPROM Revision: 01.01.01
Inhaltszusammenfassung zur Seite Nr. 13
9E428-12/36 and 9E429-12/36 Module Specific Information Port Statistics Screen Fields The following information briefly explains each Port Statistics Screen field. PORT # Indicates the current port for which statistics are displayed. OCTETS Displays the number of octets transmitted and received. PACKETS Displays the number of packets transmitted and received. TOTAL ERRORS Displays the total number of errors on this port. COLLISIONS Displays the total number of collisions detected on this port.
Inhaltszusammenfassung zur Seite Nr. 14
9E428-12/36 and 9E429-12/36 Module Specific Information MULTICASTS Displays the number of multicasts received. LINK STATUS Indicates whether there is a physical connection from this port to another 10Base- FL device. One of the following values appears: • Link - There is a 10Base-FL link signal present; there is a valid physical connection from this port to another 10Base-FL device. • No Link - There is no 10Base-FL link signal present; there is no valid physical connection from this port to
Inhaltszusammenfassung zur Seite Nr. 15
9E428-12/36 and 9E429-12/36 Module Specific Information PORT # (Modifiable) Selects the port for which statistics are to be displayed. Displaying Statistics for Another Port To display statistics for another port: 1. Use the arrow keys to highlight the Port # field at the bottom of the screen. 2. Press the Space Bar to increment (or press the Backspace key to decrement) the port number. 3. Press the Return key (neither the read-only Port # field nor the statistics will change until you press the R
Inhaltszusammenfassung zur Seite Nr. 16
9E428-12/36 and 9E429-12/36 Module Specific Information System Resources Screen The 9E428-12/36 and 9E429-12/36 System Resources Screen (Figure 4), displays information about current and available resources on the module. SmartSwitch 9000 Local Management System Resources Device Name: 9E428-36 Firmware Revision: 01.00.00 Slot #: 12 BOOTPROM Revision: 01.00.00
Inhaltszusammenfassung zur Seite Nr. 17
9E428-12/36 and 9E429-12/36 Module Specific Information System Resources Screen Fields The following information briefly explains each System Resources Screen field. Flash Memory Installed/Available Displays the size of Flash Memory and indicates how many bytes are currently available. DRAM Installed/Available Displays the size of dynamic random access memory (DRAM) and indicates how many bytes are currently available. SRAM Installed/Available Displays the size of static random access memory (SRA
Inhaltszusammenfassung zur Seite Nr. 18
9E428-12/36 and 9E429-12/36 Module Specific Information 16
