Inhaltszusammenfassung zur Seite Nr. 1
SATA/eSATA II PCI & PCI-E Card & CardBus
Inhaltszusammenfassung zur Seite Nr. 2
Package Contents: SATA/eSATA PCI Host Controller (UGT-ST300): • Driver CD-ROM • User Manual • PCI Card SATA/eSATA PCI-Express Host Controller (UGT-ST400): • Driver CD-ROM • User Manual • PCI-Express Card 2-Port eSATA PCMCIA CardBus (UGT-ST350CB): • Driver CD-ROM • User Manual • PCMCIA PC Card TRADEMARKS MS-DOS, Microsoft, Windows 95/98/NT/2000/ME/XP are trademarks of Microsoft Corporation. Apple, Macintosh and Mac are trademarks of Apple Computer. *All other third-party brands and names are th
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents: 1. Introduction .................................................................................................... pg. 2 2. Specifications/Features ............................................................................... pg. 3 3. System Requirements ................................................................................... pg. 4 4. Parts Layout ....................................................................................................
Inhaltszusammenfassung zur Seite Nr. 4
1. Introduction: Serial ATA (SATA) is the latest form of computer connectivity, featuring faster transfer speeds, easier configuration, and the ability to hot swap drives. With the Vantec SATA/eSATA PCI Host Controller, the SATA/eSATA PCI-Express Host Controller, or the 2-Port eSATA PCMCIA CardBus, you can add the features and functionality of eSATA to your computer or notebook. By providing an internal SATA port, the PCI and PCI-Express Host Controllers offer the expanadability to add a hard
Inhaltszusammenfassung zur Seite Nr. 5
2. Specifications/Features: SATA/eSATA PCI Host Controller (UGT-ST300): Specifications: • Interface: 32-bit 33/66 MHz PCI v2.2 • Connections: 1x Internal SATA port 1x External SATA (eSATA) port • Dimensions: 120mm x 50mm x 13mm (Not including mounting plate) Features: • Easily add SATA/eSATA to any system with an open PCI slot. • Transfer Rates Up to 1500Mbps (150MB/s). • Supports Hot-swapping: Plug and play without rebooting! • LED drive activity header for each port. SATA/eSATA
Inhaltszusammenfassung zur Seite Nr. 6
3. System Requirements: SATA/eSATA PCI Host Controller (UGT-ST300): • Intel Pentium II 350MHz-compatible or greater • Microsoft Windows 98SE/ME/2000/XP • Open PCI slot. SATA/eSATA PCI-Express Host Controller (UGT-ST400): • Intel Pentium II 350MHz-compatible or greater • Microsoft Windows 98SE/ME/2000/XP • Open PCI-Express slot. 2-Port eSATA PCMCIA CardBus (UGT-ST350CB): • Intel Pentium II 350MHz-compatible or greater • Microsoft Windows 98SE/ME/2000/XP • Open PCMCIA slot. System Requirements 4
Inhaltszusammenfassung zur Seite Nr. 7
4. Parts Layout: SATA/eSATA PCI Host Controller (UGT-ST300): LED Activity Headers Internal SATA port External SATA (eSATA) Port SATA/eSATA PCI-Express Host Controller (UGT-ST400): LED Activity Headers Internal SATA port External SATA (eSATA) Port 2-Port eSATA PCMCIA CardBus (UGT-ST350CB): External SATA (eSATA) ports Parts Layout 5
Inhaltszusammenfassung zur Seite Nr. 8
5. Installation: SATA/eSATA PCI Host Controller (UGT-ST300) / SATA/eSATA PCI-Express Host Controller (UGT-ST400): 5.1. Hardware Installation: 1) IfyouhaveanLEDyouwouldliketoconnecttothedriveactivity header, connect it first. If not, skip this step. 1-2 External Port 3-4 Internal Port Pins 2 and 4 are positive 2) Insert card into an open PCI slot in your computer. When firmly seated in the PCI slot (or PCI-E slot for ST400), screw in mounting bracket. Installation 6
Inhaltszusammenfassung zur Seite Nr. 9
SATA/eSATA PCI Host Controller (UGT-ST300) / SATA/eSATA PCI-Express Host Controller (UGT-ST400): 5.2. Driver Installation: Windows XP/2000 - New Installation of Operating System 1) Upon startup, the SATA/eSATA Host Controller’s BIOS screen should appear and display any SATA drives connected. If the BIOS screen does not appear or the attached hard drive is not recognized, recheck your connections. 2) During Windows setup, press F6 when prompted: “Press F6 to install a third- party SCSI or RAID
Inhaltszusammenfassung zur Seite Nr. 10
SATA/eSATA PCI Host Controller (UGT-ST300) / SATA/eSATA PCI-Express Host Controller (UGT-ST400): 5.2. Driver Installation (continued): Windows 98/98SE/ME - New Installation of Operating System NOTE: SATA drives attached to the SATA/eSATA PCI Host Controller can not be used as boot drives for Windows 98/98SE/ME. 1) Upon startup, the SATA/eSATA PCI Host Controller’s BIOS screen should appear and display any SATA drives connected. If the BIOS screen does not appear or the attached hard drive is n
Inhaltszusammenfassung zur Seite Nr. 11
5. Installation: 2-Port eSATA PCMCIA CardBus (UGT-ST350CB): 5.3. Hardware Installation: 1) InserteSATACardBusintoanopenPCMCIAslotonnotebookcomputer. Installation 9
Inhaltszusammenfassung zur Seite Nr. 12
2-Port eSATA PCMCIA CardBus (UGT-ST350CB): 5.4. Driver Installation: Windows XP 1) You should be prompted with the Found New Hardware Wizard. Check Install from a list or specific location (advanced), click Next. If the Found New Hardware Wizard does not appear, right click My Computer and select properties. Select the hardware tab and then click on Device Manager. The Device Manager should now appear. Expand the SCSI and RAID controllers and right click Silicon Image SiI 3512 SATALink Cont
Inhaltszusammenfassung zur Seite Nr. 13
2-Port eSATA PCMCIA CardBus (UGT-ST350CB): 5.4. Driver Installation: Windows 98/98SE/ME - Adding to an Existing installation 1) You should be prompted with the Add New Hardware Wizard. Click Next. 2) Select Search for the best driver for your device option and click Next. 3) Insert the Driver CD-ROM, check Specify a Location, uncheck the other boxes, type in E:\ (if your CD-ROM/DVD is E:\), and click Next. 4) Click Next again, and then Finish. 5) Remove the driver diskette and restart Windows.
Inhaltszusammenfassung zur Seite Nr. 14
5.5. Connecting Drives: SATA/eSATA PCI Host Controller (UGT-ST300) / SATA/eSATA PCI-Express Host Controller (UGT-ST400): Internal SATA: ConnectSATAcabletotheInternalSATAportonthecard. Connecttheotherendtothedrive. External SATA: ConnecteSATAcabletotheExternalSATAportonthecard. Connecttheotherendtothedriveorenclosure. 2-Port eSATA PCMCIA CardBus (UGT-ST350CB): External SATA: ConnecteSATAcabletoeitherExternalSATAportontheCardBus. Connecttheotherendtothedriveorenclosure. Installation 12
Inhaltszusammenfassung zur Seite Nr. 15
9. Warranty: The SATA/eSATA PCI & PCI-E Host Controller and eSATA PCMCIA CardBus come with a 1 year limited warranty (90 day parts). If your unit should become defective within that time frame, please go to http://www.vantecusa.com for information on how to receive warranty exchange or repair. Cosmetic defects and missing parts are not covered under this warranty. Please check the contents of the unit to make sure you received all parts. Also, check for any cosmetic flaws. If any parts are mis
