Inhaltszusammenfassung zur Seite Nr. 1
TL-WDN3200
N600 Wireless Dual Band USB Adapter
Rev: 1.0.0
1910010577
Inhaltszusammenfassung zur Seite Nr. 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2012 TP-LINK TECHNOLOGIES CO.
Inhaltszusammenfassung zur Seite Nr. 3
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarant
Inhaltszusammenfassung zur Seite Nr. 4
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. National Restrictions This device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below: Country Restriction Reason/remark General authorization required for outdoor use and Bulgaria
Inhaltszusammenfassung zur Seite Nr. 5
Industry Canada Statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be
Inhaltszusammenfassung zur Seite Nr. 6
TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: N600 Wireless Dual Band USB Adapter Model No.: TL-WDN3200 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives: Directives 1999/5/EC, Directives 2006/95/EC, Directives1999/519/EC, Directives 2011/65/EU The above product is in conformity with
Inhaltszusammenfassung zur Seite Nr. 7
CONTENTS Package Contents .................................................................................................... 1 Chapter 1 Product Overview ................................................................................. 2 1.1 Introduction ............................................................................................................. 2 1.2 Features.................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 8
TL-WDN3200 N600 Wireless Dual Band USB Adapter Package Contents Please verify that all the package contents below are available. One TL-WDN3200 N600 Wireless Dual Band USB Adapter Quick Installation Guide USB cable One Resource CD for TL-WDN3200, including: • TP-LINK Wireless Configuration Utility (TWCU) and Drivers • User Guide • Other helpful information Make sure that the above items are contained in the package. If any of the above items are damaged or missing, please contact
Inhaltszusammenfassung zur Seite Nr. 9
TL-WDN3200 N600 Wireless Dual Band USB Adapter Chapter 1 Product Overview 1.1 Introduction The adapter is a 802.11n client device designed to deliver a high-speed and unrivaled wireless performance for your desktop. It has better speed and range with less interference compared to other wireless-N adapters, thus you can get a better Internet experience, such as downloading, online gaming, Internet phone calls and video streaming. With the 802.11n technology, higher throughput improvements
Inhaltszusammenfassung zur Seite Nr. 10
TL-WDN3200 N600 Wireless Dual Band USB Adapter 1.3 Hardware Overview LED status: Status Working Status On The adapter has connected to a network. . The driver has been installed but no data is being transmitted or Flashing Slowly received. Flashing Quickly Data is being transmitted or received. Note: When the adapter failed to connect to a wireless network, the LED may be off. Please choose your network and try to connect again. 3
Inhaltszusammenfassung zur Seite Nr. 11
TL-WDN3200 N600 Wireless Dual Band USB Adapter Chapter 2 Installation Please insert the USB adapter into your computer before installing the driver software from the Resource CD. 2.1 Hardware Installation There are two methods: Method One: Plug the adapter into an available USB interface on your computer directly. Method Two: Connect the adapter and your computer with the provided USB cable. When the Found New Hardware wizard appears, click Cancel. 2.2 Software Installation Th
Inhaltszusammenfassung zur Seite Nr. 12
TL-WDN3200 N600 Wireless Dual Band USB Adapter 1. Insert the Resource CD into your CD-ROM drive, and the window below will appear. Select model TL-WDN3200. There will be a menu including: Install Driver&Utility and User Guide. Click Install Driver&Utility to begin. Figure 2-1 2. The InstallShield Wizard window will appear. Click Next to continue. Figure 2-2 5
Inhaltszusammenfassung zur Seite Nr. 13
TL-WDN3200 N600 Wireless Dual Band USB Adapter 3. Choose a setup type. It is recommended to select Install TP-LINK Wireless Configuration Utility and Driver. Selecting Install Driver Only will only install driver and you will not be able to manage the networks through TP-LINK configuration utility. Click Next to continue. Figure 2-3 4. Click Change to specify the destination location for the software or you can leave it default. Click Next in the screen below to continue. Figure 2-4
Inhaltszusammenfassung zur Seite Nr. 14
TL-WDN3200 N600 Wireless Dual Band USB Adapter 5. Click Install to continue the setup. Figure 2-5 6. The utility and drivers will install. This may take 1~2 minutes. Figure 2-6 7
Inhaltszusammenfassung zur Seite Nr. 15
TL-WDN3200 N600 Wireless Dual Band USB Adapter 7. After all the steps above, you will see the screen below. Click Finish to complete the setup. Figure 2-7 8. After installation, the utility configuration page will automatically pop up as shown in the following figure and the icon will appear on your desktop. To connect to a network, please refer to Chapter 3 Connect to a Wireless Network. Figure 2-8 Note: If you have only installed the driver, the above configuration page will not
Inhaltszusammenfassung zur Seite Nr. 16
TL-WDN3200 N600 Wireless Dual Band USB Adapter Chapter 3 Connect to a Wireless Network With both the hardware and software successfully installed into your computer, you can quickly connect to a wireless network using one of the following methods. Method One: To connect using TWCU TL-WDN3200 uses the TP-LINK Wireless Configuration Utility as the management software. The utility provides you an easy interface to connect to a network and to change any settings related to the wireless ada
Inhaltszusammenfassung zur Seite Nr. 17
TL-WDN3200 N600 Wireless Dual Band USB Adapter automatically connect to your target network next time and automatically save it as a profile if you tick Connect automatically. Figure 3-2 3. If word None appears behind the SSID, this means the network to be connected is not security-enabled and you can connect to the network without entering a key. To prevent outside intrusion and safeguard your network, it is strongly recommended that you set a password to your router or access point.
Inhaltszusammenfassung zur Seite Nr. 18
TL-WDN3200 N600 Wireless Dual Band USB Adapter enter a key. Figure 3-4 4. You have successfully connected to your network and can surf the Internet now. Click Close to enjoy the Internet. Figure 3-5 5. To view more information about the network currently connected, click Status in the tools section and the page will display information such as the network type, link quality and wireless mode. 11
Inhaltszusammenfassung zur Seite Nr. 19
TL-WDN3200 N600 Wireless Dual Band USB Adapter Figure 3-6 3.2 To connect using WPS WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing network quickly. If the wireless router supports WPS or QSS (Quick Secure Setup), you can establish a wireless connection between wireless card and router using either Push Button Configuration (PBC) method or PIN method. Three WPS connection methods are listed in the following parts. 3.2.1 PBC (Push Button Conf
Inhaltszusammenfassung zur Seite Nr. 20
TL-WDN3200 N600 Wireless Dual Band USB Adapter Figure 3-8 Figure 3-9 2) Open TWCU and click WPS tab. Select Push the button on my access point or wireless router and then click Connect. Figure 3-10 13
