Inhaltszusammenfassung zur Seite Nr. 1
®
SUPER
SUPERSERVER 5014C-T
USER’S MANUAL
Revision 1.0b
Inhaltszusammenfassung zur Seite Nr. 2
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. SUPERMICRO COMPUTER reserves the right to make changes t
Inhaltszusammenfassung zur Seite Nr. 3
Preface Preface About This Manual This manual is written for professional system integrators and PC techni- cians. It provides information for the installation and use of the Super- Server 5014C-T. Installation and maintainance should be performed by ex- perienced technicians only. The SuperServer 5014C-T is a high-end single processor 1U rackmount server based on the SC811T-260 server chassis and the Super P8SCi motherboard. The P8SCi supports single Intel® Pentium® 4 LGA775 ("Prescott") type
Inhaltszusammenfassung zur Seite Nr. 4
SUPERSERVER 5014C-T User's Manual Chapter 4: System Safety You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the SuperServer 5014C-T. Chapter 5: Advanced Motherboard Setup Chapter 5 provides detailed information on the P8SCi motherboard, including the locations and functions of connectors, headers and jumpers. Refer to this chapter when adding or removing processors or main memory and
Inhaltszusammenfassung zur Seite Nr. 5
Preface Notes v
Inhaltszusammenfassung zur Seite Nr. 6
SUPERSERVER 5014C-T User's Manual Table of Contents Preface About This Manual ...................................................................................................... iii Manual Organization ................................................................................................... iii Chapter 1: Introduction 1-1 Overview......................................................................................................... 1-1 1-2 Motherboard Features ....................
Inhaltszusammenfassung zur Seite Nr. 7
Table of Contents 4-3 ESD Precautions ............................................................................................. 4-3 4-4 Operating Precautions ................................................................................... 4-4 Chapter 5: Advanced Motherboard Setup 5-1 Handling the Motherboard ............................................................................. 5-1 5-2 Motherboard Installation ........................................................................
Inhaltszusammenfassung zur Seite Nr. 8
SUPERSERVER 5014C-T User's Manual CMOS Clear ............................................................................................. 5-17 USB Wake-Up ......................................................................................... 5-18 Watch Dog Enable/Disable ................................................................... 5-18 Speaker Jumper ..................................................................................... 5-18 Keyboard Wake-Up ............................
Inhaltszusammenfassung zur Seite Nr. 9
Chapter 1: Introduction Chapter 1 Introduction 1-1 Overview The Supermicro SuperServer 5014C-T is a high-end single processor, 1U rackmount server with state-of-the-art features. The 5014C-T is comprised of two main subsystems: the SC811T-260 1U chassis and the P8SCi motherboard. Please refer to our web site for information on operating systems that have been certified for use with the 5014C-T. In addition to the mainboard and chassis, various hardware components may have been included wit
Inhaltszusammenfassung zur Seite Nr. 10
SUPERSERVER 5014C-T User's Manual 1-2 Motherboard Features At the heart of the SuperServer 5014C-T lies the P8SCi, a single processor motherboard based upon Intel's E7221 chipset. Below are the main fea- tures of the P8SCi. Processor The P8SCi has an LGA775 ZIF socket to support a single Intel® Pentium® 4 ("Prescott" type) processor with hyper-threading technology at an 800/533 MHz FSB speed or a single Intel® Celeron® processor at a 533 MHz FSB speed. Please refer to the support section of ou
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 1: Introduction Onboard Controllers/Ports An onboard IDE controller supports one floppy drive and up to four Ultra ATA 100 hard drives or ATAPI devices. Onboard I/O backpanel ports in- clude one COM port, one parallel port, two USB ports, PS/2 mouse and keyboard ports and two Gigabit LAN (NIC) ports. Other Features Other onboard features that promote system health include voltage moni- tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU overheat sensors,
Inhaltszusammenfassung zur Seite Nr. 12
SUPERSERVER 5014C-T User's Manual Figure 1-1 . Intel E7221 Chipset: System Block Diagram Note: This is a general block diagram. Please see Chapter 5 for details. 1-4
Inhaltszusammenfassung zur Seite Nr. 13
Chapter 1: Introduction 1-3 Server Chassis Features The SuperServer 5014C-T is built on the SC811T-260 1U rackmount server chassis. The following is a general outline of the main features of the SC811T-260 chassis. System Power When configured as a SuperServer 5014C-T, the SC811T-260 chassis in- cludes a single 260W power supply. Serial ATA Subsystem For the 5014C-T, the SC811T-260 chassis was designed to support two Serial ATA hard drives. The Serial ATA drives are hot-swappable units. ATA/10
Inhaltszusammenfassung zur Seite Nr. 14
SUPERSERVER 5014C-T User's Manual Figure 1-2. Rear I/O Panel 1-6
Inhaltszusammenfassung zur Seite Nr. 15
Chapter 1: Introduction 1-4 Contacting Supermicro Headquarters Address: SuperMicro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: SuperMicro Computer B.V. Het Sterrenbeeld 28, 5215 ML 's-Hertogenbosch, The Netherlands Tel: +31 (0) 73-6400390 Fax: +31 (0) 73-6416525 Email: sales@supermicro.nl (General I
Inhaltszusammenfassung zur Seite Nr. 16
SUPERSERVER 5014C-T User's Manual Notes 1-8
Inhaltszusammenfassung zur Seite Nr. 17
Chapter 2: Server Installation Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your SuperServer 5014C-T up and running. Following the steps in the order given should enable you to have the system operational within a minimal amount of time. This quick setup assumes that your 5014C-T system has come to you with the processor and memory preinstalled. If your system is not already fully integrated with a motherboard, processor, system memory etc.,
Inhaltszusammenfassung zur Seite Nr. 18
SUPERSERVER 5014C-T User's Manual Choosing a Setup Location - Leave enough clearance in front of the rack to enable you to open the front door completely (~25 inches). - Leave approximately 30 inches of clearance in the back of the rack to allow for sufficient airflow and ease in servicing. - This product is for installation only in a Restricted Access Location (dedicated equipment rooms, service closets and the like). Warnings and Precautions! ! ! Rack Precautions - Ensure that the
Inhaltszusammenfassung zur Seite Nr. 19
Chapter 2: Server Installation Rack Mounting Considerations Ambient Operating Temperature If installed in a closed or multi-unit rack assembly, the ambient operating temperature of the rack environment may be greater than the ambient temperature of the room. Therefore, consideration should be given to installing the equipment in an environment compatible with the manufacturer’s maximum rated ambient temperature (Tmra). Reduced Airflow Equipment should be mounted into a rack so that the amount o
Inhaltszusammenfassung zur Seite Nr. 20
SUPERSERVER 5014C-T User's Manual 2-4 Installing the System into a Rack This section provides information on installing the SuperServer 5014C-T into a rack unit. If the system has already been mounted into a rack, you can skip ahead to Sections 2-5 and 2-6. There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. The following is a guideline for installing the unit into a rack with the rack rails provided with the system. You should also re
