Inhaltszusammenfassung zur Seite Nr. 1
USB DVI KVM with Cables
Dual Port Compact USB DVI KVM with Cables and Audio Switching
SV211KDVI
Instruction Manual
Actual product may vary from photo
Inhaltszusammenfassung zur Seite Nr. 2
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guar
Inhaltszusammenfassung zur Seite Nr. 3
Instruction Manual Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Hardware Guide . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
Instruction Manual Introduction Thank you for purchasing a StarTech.com Dual Port Compact USB DVI KVM with Cables and Audio Switching. Supporting both digital and analog video signal transmissions for display resolutions of up to 1600x1200 (digital) and 2048x1536 (analog), this compact and attractive switch provides access and control of two DVI enabled computers, as well as independent audio/microphone switching that provides an uninterrupted audio experience, even if you switch to the secondar
Inhaltszusammenfassung zur Seite Nr. 5
Instruction Manual Hardware Guide Front Panel 1 2 3 4 5 Rear Panel 6 7 8 9 10 1 Microphone IN port 2 Speaker OUT port 3 Console Display DVI OUT port 4 Shared USB ports 5 Power Button 6 DC 5V Power IN port 7 USB Connection (for control peripherals) to Computer 2 8 DVI Input (from Computer 2) 9 USB Connection (for control peripherals) to Computer 1 10 DVI Input (from Computer 1) 2
Inhaltszusammenfassung zur Seite Nr. 6
Instruction Manual Installation This section details how to install the optional software, as well as how to make the necessary physical connections between your peripherals and the KVM switch. For best results, ensure that all of the computers to be controlled are located as close as possible to the KVM switch and console peripherals (monitor, keyboard, mouse), as this will reduce the length of cabling required and reduces the chance of interference. KVM Switcher Software 1. For each computer t
Inhaltszusammenfassung zur Seite Nr. 7
Instruction Manual 3. Connect the shared USBkeyboard, mouse, monitor, speaker/headphone and microphone to the corresponding port on the front panel of the KVM Switch. 4. Connect each of the Computer connections (USB and DVI) to the computers you wish to control, using the included 3-in-1 KVM combo cables. 5. Optional: Connect the shared speaker and microphone to the appropriate ports on the front panel of the KVM Switch. Configuration Diagram PC 1 PC 2 Please note: On some older computers, you m
Inhaltszusammenfassung zur Seite Nr. 8
Instruction Manual Please note: Hotkeys are only functional while the computer is operating system is running. If you wish to switch computer control during the boot phase, please use the front panel pushbuttons as necessary. User Definable Hotkeys: Hotkey sequence = Ctrl + Alt + [command key]. Please note that these three keys must be pressed simultaneously. Upon the release of the keys, the switching action will be executed. Universal Hotkeys Sequence: Scroll Lock + Scroll Lock switches to the
Inhaltszusammenfassung zur Seite Nr. 9
Instruction Manual To change the command key, simply enter it into the field provided in the Configuration Dialog Box. Depending on the command key you’ve designated in the KVM Switcher Software, to switch to PC ‘x’: Hotkey sequence = Ctrl + Alt + [command key]* *The default hotkey setting is CTRL + ALT + 1/2 for PCs 1 and 2. You can also use Scroll Lock + Scroll Lock to switch to the other computer Please note: If you intend to modify the command key, you have to modify them on each of the co
Inhaltszusammenfassung zur Seite Nr. 10
Instruction Manual Specifications Dimensions 154 mm (6.06”) x 65.5 mm (2.58”) x 27 mm (1.06”) (LxWxH) Regulatory ROHS, CE, WEEE, FCC Certifications PC Port 2 x USB Type B Connectors 2 x DVI-I (integrated with audio&mic) 2 x USB Type A (Keyboard & Mouse & USB 2.0/1.1 Devices) Console Port 1x DVI 15-pin female Connectors 1 x 3.5mm audio jack 1 x 3.5mm mic jack VGA Resolution 1920 x 1200 (digital) / 2048 x 1536 (analog) Power Type DC 5V2A power receptacle Technical Support StarTech.com’s lifetim
Inhaltszusammenfassung zur Seite Nr. 11
About StarTech.com StarTech.com is “The Professionals’ Source for Hard-to-Find Computer Parts”. Since 1985, we have been providing IT professionals with the quality products they need to complete their solutions. We offer an unmatched selection of computer parts, cables, server management solutions and A/V products and serve a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.com for complete information about all our products
