Inhaltszusammenfassung zur Seite Nr. 1
Hi-Speed USB
CardBus Dual-M
Quick Installation Guide
Features and Benefits
• Compliant with USB specifications revision 2.0
• PC Card Interface with Power Management
• Supports simultaneous operation of multiple high-
speed USB 2.0 and USB 1.1 devices
• Supports high-speed (480 Mbps), full-speed (12
Mbps), and low-speed (1.5 Mbps) data transfer
modes
• Includes a high quality switching power adapter to
provide standard power output for each port
Note: USB 1.1 devices are limited to USB 1.1 spee
Inhaltszusammenfassung zur Seite Nr. 2
Package Contents • Hi-Speed USB CardBus Dual-M • Switching power adapter • USB power cable • Driver CD • This quick installation guide Layout Power Adapter Jack* Power LED USB 2.0 Ports Figure 1. Layout * Note: Some USB devices may require the Hi-Speed USB CardBus Dual-M to be powered. Please plug in either the Switching power adapter or the USB power cable if your device needs additional power. Refer to the device's manual for more details. Not all USB devices requires additional power to o
Inhaltszusammenfassung zur Seite Nr. 3
Hardware Installation General instructions for installing the Cardbus are provided below, since the design of notebook computers may vary. Refer to your system’s reference manual for further information, if needed. 1. Power off your notebook computer and any other connected peripheral devices. 2. Insert the Cardbus into the CardBus Type II slot of your notebook computer with its 68-pin connector facing the slot. Make sure it is inserted all the way in for a solid connection. 3. Power on your not
Inhaltszusammenfassung zur Seite Nr. 4
5. Double click v108.img, then double click the USB2EHCI_v108 disk icon that appears on the desktop. 6. At the next window, double click USB2EHCI_v108 to start installation. 7. At the Authorization window, click the lock icon, enter your administrator password, and click OK. 8. Click Continue. When prompted to select the destination disk to install the USB 2.0 driver, choose the disk where your Mac OS is installed, and click Continue. 9. Click Install, Continue Installation, and Restart to comp
Inhaltszusammenfassung zur Seite Nr. 5
Mac OS X (v10.2.8) or later Mac OS X (v10.2.8) or later have built-in driver support for this Cardbus. Just install the Cardbus and Mac OS will automatically detect and install the correct drivers for it. No additional driver is necessary. To Verify Mac OS Driver Installation Mac OS 8.6, 9.x, X (v10.0-10.1) Since we didn't load any additional driver under these Mac OSs, the only way to verify the Cardbus works is actually connecting devices to the USB ports. Mac OS X (v10.1.3-10.1.5) 1. Double
Inhaltszusammenfassung zur Seite Nr. 6
Mac OS X (v10.2.8) or later Since we didn't load any additional driver under these Mac OSs, the only way to verify the Cardbus works is actually connecting devices to the USB ports. 6
Inhaltszusammenfassung zur Seite Nr. 7
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our website at www.siig.com and click on Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and one of our technical support analysts will promptly respond. A lifetime manufacturer warranty supplied with this product is offered by SIIG, Inc. Please see SIIG website for more
Inhaltszusammenfassung zur Seite Nr. 8
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivity products, including PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b), Networking, Sound Cards, and other accessories. SIIG is the premier one-stop source of upgrades. SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty. High-quality control standards are evident by
