Inhaltszusammenfassung zur Seite Nr. 1
Wireless N Adapter RNX-N180UB
User Manual
Inhaltszusammenfassung zur Seite Nr. 2
Wireless N Adapter RNX-N180UB User Manual FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the
Inhaltszusammenfassung zur Seite Nr. 3
Wireless N Adapter RNX-N180UB User Manual required Luxembourg General authorization required for network and service supply(not for spectrum) Norway Implemented This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund Russian Only for indoor applications Federation Note: Please don’t use the product outdoors in France. 3
Inhaltszusammenfassung zur Seite Nr. 4
Wireless N Adapter RNX-N180UB User Manual Table of Content Chapter 1 Overview ....................................................................................................5 Package Content.................................................................................................5 1.1 Overview of the Product.........................................................................5 1.2 Features...........................
Inhaltszusammenfassung zur Seite Nr. 5
Wireless N Adapter RNX-N180UB User Manual Chapter 1 Overview Thank you for choosing Rosewill’s 802.11n 1T2R Wireless USB adapter – RNX-N180UB. This chapter is to introduce you more about this Wireless Adapter. Package Content Before getting started, please verify that your package includes the following items: 1. Rosewill 802.11n Wireless USB Adapter x 1 2. Quick Installation Guide x 1 3. Resource CD x 1, including: Rose
Inhaltszusammenfassung zur Seite Nr. 6
Wireless N Adapter RNX-N180UB User Manual Complies with IEEE802.11n, IEEE802.11g, IEEE802.11b standards Supports 1T2R MIMO technology Supports WPA/WPA2 data security, IEEE802.1x authentication, TKIP/AES encryption, and 64/128 - bit WEP encryption Supports high rate of up to 300Mbps download speed for maximum throughput Ease to configure and provides monitoring information Supports Windows 2000, XP, Vista Supports W
Inhaltszusammenfassung zur Seite Nr. 7
Wireless N Adapter RNX-N180UB User Manual Chapter 2 Installation Guide 2.1 Software Installation Insert the Driver and Utility CD-ROM into the CD-ROM driver. The Wizard should run automatically, and Figure 0-1 should appear. If not, click the Start button and choose Run. In the field that appears, enter D:\autorun.exe (if ‘’D’’ is the letter of your CD-ROM drive). Figure 0-1 Next we use the USB wireless adapter installatio
Inhaltszusammenfassung zur Seite Nr. 8
Wireless N Adapter RNX-N180UB User Manual Figure 0-2 Click Next Figure 0-3 Click Install to start installing 8
Inhaltszusammenfassung zur Seite Nr. 9
Wireless N Adapter RNX-N180UB User Manual Figure 0-4 Follow the InstallShield Wizard steps, and click Finish when done. Figure 0-5 Now your PC or notebook will restart automatically. 9
Inhaltszusammenfassung zur Seite Nr. 10
Wireless N Adapter RNX-N180UB User Manual Chapter 3 Install Wireless Adapter The wireless USB Adapter supports up to 300 Mbps wireless connection. This USB adapter is fully compliant with the specifications defined in IEEE802.11n standard. It is designed to complement USB2.0 computers and supports Windows98SE/Me/2000/XP/Vista. 3.1 USB adapter Installation The status LED indicators of the USB wireless adapter are described in
Inhaltszusammenfassung zur Seite Nr. 11
Wireless N Adapter RNX-N180UB User Manual If the Welcome to Found New Hardware Wizard displays, choose install the software automatically (Recommended), and click Next button. The driver will be installed automatically. Figure 0-3 Now you have completed the driver and hardware installation for the adapter. 11
Inhaltszusammenfassung zur Seite Nr. 12
Wireless N Adapter RNX-N180UB User Manual Chapter 4 Configuration – Station Mode The Wireless USB Adapter provides two modes: Station mode and Access Point mode, the default is Station mode. You can select remote wireless AP to connect to Internet in station mode. But in the Access Point mode, the wireless USB adapter act as a wireless access point which the wireless USB Adapter can connect to share an Internet connection with oth
Inhaltszusammenfassung zur Seite Nr. 13
Wireless N Adapter RNX-N180UB User Manual General Information Status: Wireless network Associated, Ad-hoc Mode or Not Associated. Speed: The data Tx rate and Rx rate of the current connection. Type: The type of the current wireless connection , Infrastructures or ad hoc Encryption: Current encryption. SSID: The unique name of the wireless network to which the wireless adapter is connecting. Signal Strength: The sign
Inhaltszusammenfassung zur Seite Nr. 14
Wireless N Adapter RNX-N180UB User Manual Figure 0-3 4.2.1 Add Create a new Infrastructure mode profile If you want your wireless computers to communicate with other computers on your wired network via a wireless access point. Click the Add button to create a new infrastructure profile. 14
Inhaltszusammenfassung zur Seite Nr. 15
Wireless N Adapter RNX-N180UB User Manual Figure 0-4 When the Network Info dialog box appears (Figure 0-4), enter a name for the new profile. Enter the Network SSID. Choose the Network Authentication Mode and Data encryption from the drop-down menu and import the network key. Then click OK button. Create a new ad-hoc mode profile If you want your wireless computers communicate with each other directly, click the Add button
Inhaltszusammenfassung zur Seite Nr. 16
Wireless N Adapter RNX-N180UB User Manual Figure 0-6 Choose the Network Authentication Mode and Data encryption from the drop-down menu. And import the network key. Then click OK button. You have successfully created a profile. 4.2.2 Remove Select a profile and click Remove button to delete this profile (Figure 0-7). 16
Inhaltszusammenfassung zur Seite Nr. 17
Wireless N Adapter RNX-N180UB User Manual Figure 0-7 4.2.3 Edit Select a profile and click Edit button to edit this profile (Figure 0-8). Figure 0-8 17
Inhaltszusammenfassung zur Seite Nr. 18
Wireless N Adapter RNX-N180UB User Manual Figure 0-9 Modify the profile information according to your demand. 4.2.4 Duplicate Select a profile which you want to copy and then click Duplicate （Figure 0-10 ） Figure 0-10 Import the new profile name in the popup window blank (Figure 0-11) 18
Inhaltszusammenfassung zur Seite Nr. 19
Wireless N Adapter RNX-N180UB User Manual Figure 0-11 4.2.5 Set default When you want to make one profile as a default wireless connection, you should select the profile and click Set default button. The wireless adapter will use this profile to connect to wireless network automatically when the utility running next time. Figure 0-12 4.2 Available Network The Available Network tab displays a list of infrastructure and ad-hoc
Inhaltszusammenfassung zur Seite Nr. 20
Wireless N Adapter RNX-N180UB User Manual Figure 0-13 Double-click the network to which you wish to connect. Figure 0-14 Refer to Figure 0-14 choose the Authorization modes and Encryption modes in the drop-down box. If the wireless network uses a Passphrase, enter the Passphrase in 20
