Inhaltszusammenfassung zur Seite Nr. 1
REJ10J0497-0100Z
M30880T-EPB
User's Manual
Emulation Probe for M32C/88 Group
Rev.1.00
Jan. 16, 2005
Inhaltszusammenfassung zur Seite Nr. 2
Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with ap- propriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of non- flam
Inhaltszusammenfassung zur Seite Nr. 3
M30880T-EPB User’s Manual Preface Preface The M30880T-EPB is an emulation probe for the M32C/88 Group MCUs. The M30880T-EPB is used by connecting to the PC7501 emulator main unit. This user's manual mainly describes specifications of the M30880T-EPB emulation probe and how to setup it. For details on the following products, which are used with the M30880T-EPB, refer to each product's user's manual. All the components of this product are shown in "1.1 Package components" (page 13). If t
Inhaltszusammenfassung zur Seite Nr. 4
M30880T-EPB User’s Manual Important Important Before using this product, be sure to read this user’s manual carefully. Keep this user’s manual, and refer to this when you have questions about this product. Emulator: The emulator in this document refers to the following products that are manufactured by Renesas Technology Corp.: (1) PC7501 main unit (2) Emulation probe (3) Package converter board for connecting the user system The emulator herein does not include the customer’s use
Inhaltszusammenfassung zur Seite Nr. 5
M30880T-EPB User’s Manual Important Usage restrictions: This emulator has been developed as a means of supporting system development by users. Therefore, do not use it as a device used for equipment-embedded applications. Also, do not use it for developing the systems or equipment used for the following purposes either: (1) Transportation and vehicular (2) Medical (equipment where human life is concerned) (3) Aerospace (4) Nuclear power control (5) Undersea repeater If you are consid
Inhaltszusammenfassung zur Seite Nr. 6
M30880T-EPB User’s Manual Precautions for Safety Precautions for Safety Definitions of Signal Words In both the user’s manual and on the product itself, several icons are used to insure proper handling of this product and also to prevent injuries to you or other persons, or damage to your properties. This chapter describes the precautions which should be taken in order to use this product safely and properly. Be sure to read this chapter before using this product. This symbol repr
Inhaltszusammenfassung zur Seite Nr. 7
M30880T-EPB User’s Manual Precautions for Safety WARNING Warnings for AC Power Supply: If the attached AC power cable does not fit the receptacle, do not alter the AC power cable and do not plug it forcibly. Failure to comply may cause electric shock and/or fire. Use an AC power cable which complies with the safety standard of the country. Do not touch the plug of the AC power cable when your hands are wet. This may cause electric shock. This product is connected signal gro
Inhaltszusammenfassung zur Seite Nr. 8
M30880T-EPB User’s Manual Precautions for Safety CAUTION Cautions to Be Taken for Turning On the Power: Turn ON the power of the emulator and user system as simultaneously as possible. Turn OFF the power of the emulator and user system as simultaneously as possible. Do not leave either the emulator or user system powered on, because of leakage current the internal circuits may be damaged. When turning ON the power again after shutting OFF the power, wait about 10 seconds. C
Inhaltszusammenfassung zur Seite Nr. 9
M30880T-EPB User’s Manual Contents Contents Preface..........................................................................................................................................................................3 Important.......................................................................................................................................................................4 Precautions for Safety ....................................................................
Inhaltszusammenfassung zur Seite Nr. 10
M30880T-EPB User’s Manual Contents 4. Hardware Specifications........................................................................................................................................77 4.1 Target MCU Specifications ..........................................................................................................................77 4.2 Differences between the Actual MCU and Emulator ...................................................................................7
Inhaltszusammenfassung zur Seite Nr. 11
M30880T-EPB User’s Manual User Registration User Registration When you have purchased the emulator presented in this user's manual, please be sure to register it. As the hardware tool user registration FAX sheet is included with this manual, fill it in and FAX it to your local distributor or email the same contents to the following address. Your registered information is used for only after-sale services, and not for any other purposes. Without user registration, you will not be able to
Inhaltszusammenfassung zur Seite Nr. 12
M30880T-EPB User’s Manual Terminology Terminology Some specific words used in this user's manual are defined as follows: Emulator system This means an emulator system built around the PC7501 emulator. The PC7501 emulator system is configured with an emulator main unit, emulation probe, host machine and emulator debugger. Emulator main unit (Hereafter PC7501) This means an emulator main unit for M16C Family MCUs. Emulation probe This means the emulation probe (this product) for
Inhaltszusammenfassung zur Seite Nr. 13
M30880T-EPB User’s Manual 1. Outline 1. Outline This chapter describes the package components, the system configuration and the preparation for using this product for the first time. 1.1 Package Components The M30880T-EPB package consists of the following items. When unpacking it, check to see if your M30880T-EPB contains all of these items. Table 1.1 Package components Item Quantity M30880T-EPB emulation probe 1 M30800T-PTC (pre-mounted) converter board for 100-pin LCC 1 IC61
Inhaltszusammenfassung zur Seite Nr. 14
M30880T-EPB User’s Manual 1. Outline 1.3 System Configuration 1.3.1 System Configuration Figure 1.1 shows a configuration of the M30880T-EPB system. Figure 1.1 System configuration (1) Emulation probe M30880T-EPB (this product) This emulation probe contains an evaluation MCU. (2) Converter board M30800T-PTC (included) This is a converter board for connecting to the user system (for 100-pin 0.65-mm-pitch LCC socket). For details, refer to "2.9 Connecting the User System
Inhaltszusammenfassung zur Seite Nr. 15
M30880T-EPB User’s Manual 1. Outline 1.3.2 Names and Functions of the PC7501 Upper Panel LEDs Figure 1.2 shows the names of the LEDs on the upper panel of the emulator. Figure 1.2 Names of the LEDs on the upper panel of the PC7501 (1) System Status LEDs The system status LEDs indicate the emulator PC7501's power supply, firmware operating status, etc. Table 1.3 lists the definition of each system status LED. Table 1.3 Definitions of the system status LEDs Name Status Mean
Inhaltszusammenfassung zur Seite Nr. 16
M30880T-EPB User’s Manual 1. Outline (2) Target Status LEDs The target status LEDs indicate the target MCU's operating status and target board's power supply. Table 1.4 lists the definition of each target status LED. Table 1.4 Definitions of the target status LEDs Name Status Meaning POWER ON Power is supplied to the target MCU. OFF Power is not supplied to the target MCU. CLOCK ON Target MCU internal clock is oscillating. OFF Target MCU internal clock is not oscillating. RESET ON
Inhaltszusammenfassung zur Seite Nr. 17
M30880T-EPB User’s Manual 1. Outline 1.4 Specifications Tables 1.5 and 1.6 list the specifications of the M30880T-EPB. Table 1.5 M30880T-EPB specifications (1/2) Applicable MCUs M32C/88 Group Evaluation MCU M30882FJVGP ROM size: 512 KB + 4 KB, RAM size: 18 KB Usable mode Single-chip mode Maximum operating frequency VCC1 = VCC2 = 4.2 to 5.5 V: 32 MHz Applicable power supply 4.2--5.5 V Basic debugging functions - Download - Software break (max. 64 points) - Program execution/stop (
Inhaltszusammenfassung zur Seite Nr. 18
M30880T-EPB User’s Manual 1. Outline Table 1.6 M30880T-EPB specifications (2/2) Host machine interface - LPT parallel (ECP, EPP, Byte/compatibility and Nibble/compatibility modes) - USB (USB 1.1, full-speed) - LAN (10BASE-T) Power supply to emulator Supplied from included AC adapter (power supply voltage: 100--240 V, 50/60 Hz) Connection to user system For 144-pin 0.5-mm-pitch LQFP (144P6Q-A): (see "2.9 Connecting the User System" M3T-FLX-144NSD (not included) on page 29) For 100-pin 0
Inhaltszusammenfassung zur Seite Nr. 19
M30880T-EPB User’s Manual 2. Setup 2. Setup This chapter describes the preparation for using this product, the procedure for starting up the emulator and how to change settings. 2.1 Flowchart of Starting Up the Emulator The procedure for starting up the emulator is shown in Figure 2.1. For details, refer to each section hereafter. And, when the emulator does not start up normally, refer to “5. Troubleshooting” (page 92). Check the package components. Refer to “1.1 Package
Inhaltszusammenfassung zur Seite Nr. 20
M30880T-EPB User’s Manual 2. Setup 2.2 Installing the Emulator Debugger If the OS used in your host machine is Windows XP or 2000, this installation must be executed by a user with administrator rights. Be aware that users without administrator rights cannot complete the installation. Install the emulator debugger M3T-PD308F following the procedure described below. (1) Downloading the M3T-PD308F V.3.20 Release 1 Download the M3T-PD308F V.3.20 Release 1 from the URL below. http://w
