Inhaltszusammenfassung zur Seite Nr. 1
CompactFlash Size
Ethernet LAN Card
For Both Notebook PC and
Windows CE-based
PDA/ Palm PCs/Pocket PCs
Quick Installation Guide
M73-APO01-440
Inhaltszusammenfassung zur Seite Nr. 2
FCC REGULATORY STATEMENTS Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interface, and 2. This device must accept any interface received, including interface that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro
Inhaltszusammenfassung zur Seite Nr. 3
INTRODUCTION This CompactFlash Size Ethernet LAN Card is designed for Windows CE-based palm-sized PCs, handheld PCs and any computer with a CompactFlash slot. Plus, with connecting to a PCMCIA Adapter (not included), this CompactFlash Ethernet LAN Card turns into a PC card that plugs into any computer with a PCMCIA slot. The CompactFlash Ethernet LAN Card is easy to install, and no external power is required. SYSTEM REQUIREMENTS For Windows CE-based PDA/Palm PC: A Type I or Type I
Inhaltszusammenfassung zur Seite Nr. 4
PCMCIA release 2.1 compliant Card Services and Socket Services OPERATING ENVIORNMENTS For Windows CE-based PDA/Palm PC: Software Compatibility Windows CE 2.0 or newer version For Notebook PC: Novell Netware 3.x/4.x Microsoft LAN Manager Packet Driver Applications Microsoft Windows for Workgroups 3.11 Microsoft Windows 3.1 Microsoft Windows NT 4.0 Windows 98 Windows 2000 Windows ME Windows XP Lantastic 6.0 IBM OS/2 Warp Version 3 Hardware Compatibility for Processor Families:
Inhaltszusammenfassung zur Seite Nr. 5
Parts Names CompactFlash Size Ethernet LAN card ACT LED Indicator with Direct Port RJ-45 port Link LED Indicator - 3 -
Inhaltszusammenfassung zur Seite Nr. 6
HARDWARE INSTALLATION It’s referred to “the Compact Card” for the CompactFlash Ethernet LAN Card. Inserting the CompactFlash Ethernet LAN Card 1. Insert the CompactFlash Size Ethernet LAN Card into Windows CE-based PDA/Palm PC by aligning the Compact Card with wide connector toward the CompactFlash slot. Installing into a Notebook PC (Only for users who also purchased this option) 1. Plug the CompactFlash-Size Ethernet LAN Card into the PCMCIA Adapter. The - 4 -
Inhaltszusammenfassung zur Seite Nr. 7
CompactFlash Ethernet LAN Card is then turning into a conventional PCMCIA type II PC Card. 2. Align the PC Card toward the PC Card slot with brand label facing upward, as shown below. Notebook Connecting to the Network 1. Connect unshielded twisted pair (UTP) cable to the RJ-45 connector in the Attached Port of the CompactFlash card before loading any network driver. For operation in the 10Mbps (10Base-T) Ethernet network, Category 3, 4 or 5 unshielded twisted pair (UTP) cable
Inhaltszusammenfassung zur Seite Nr. 8
SOFTWARE INSTALLATION FOR WINDOWS CE 2.0/2.11/3.0 This section describes how to install the “CompactFlash Ethernet LAN Card” on a Palm- sized PC, handheld PC based on Windows CE Version 2.x or later, or on a Pocket PC based on Windows CE 3.0. 1. Establish a connection between a Windows CE based PDA/Palm PC and your Host PC, typically the Host PC runs under Windows9x/NT. 2. Install “ActiveSync” connection from the WinCE Services CD to your desktop PC. For more information, refer to
Inhaltszusammenfassung zur Seite Nr. 9
LAN Card” installed and appearing in the WinCE screen. 8. If your local LAN doesn’t run DHCP, you may have to manully configure the IP address under “Specific an IP address” option. 9. After you have followed the procedure described above and setup the Compact Card correctly, you may now use the pocket Internet Explore to browse the Internet. - 7 -
Inhaltszusammenfassung zur Seite Nr. 10
SOFTWARE INSTALLATION FOR (ONLY FOR USERS WHO NOTEBOOK PC ALSO PURCHASED THIS OPTION) Windows 98 Installation Make sure that the drivers of PC Card slot are well installed. The System Icon in the Status Area can report on its functionality. 1. Once the PC Card is connected to your computer, Windows will automatically detect the new device. Windows will prompt an ADD NEW HARDWARE WIZARD dialog box, then press Next. 2. Select Search for the best… and press Next. 3. Select Floppy
Inhaltszusammenfassung zur Seite Nr. 11
4. Click Next to continue. Windows will start to copy the appropriate driver to your system. If Windows asks you to supply your original Windows 98 installation CD- ROM, load it in the CD-ROM drive. 5. For the first time installation, please click Network icon in Control Panel to add Protocols, Client and Service if you needed. 6. Reboot the machine and the card will take effect. Windows ME Installation 1. Once the PC Card is connected to your computer, Windows will automaticall
Inhaltszusammenfassung zur Seite Nr. 12
2 Windows will copy the appropriate driver to your system. If Windows ME asks you to supply your original Windows ME installation CD-ROM, load it in the CD- ROM drive. 3 Click Finish to complete the software installation. Windows NT 4.0 1. Make sure that the Network Services - 10 -
Inhaltszusammenfassung zur Seite Nr. 13
already installed in the NT 4.0 system. 2. Insert the Ethernet Adapter into one of the system's PCMCIA Slots 3. Power up Windows NT 4.0 4. Open My Computer 5. Open Control Panel 6. Run the Network 7. Select Adapters page 8. Press Add to add network adapter 9. Press Have Disk button 10. Insert the driver disk into drive A: 11. Specify the path to ” A:\ and press OK 12. A dialog box will appear to adjust the driver's settings. The resources assignment to the adapter must be unique i
Inhaltszusammenfassung zur Seite Nr. 14
2. Select Search for a suitable driver for my device (recommended). Click Next. 3. Select Floppy disk drives and insert the disk associated with the PCMCIA Ethernet card in the disk drive. Click Next. - 12 -
Inhaltszusammenfassung zur Seite Nr. 15
4. Click Next to make Windows install the appropriate driver for the new device. 5. Click Yes to continue. - 13 -
Inhaltszusammenfassung zur Seite Nr. 16
6. Click Finish to complete the software installation. Windows XP Installation 1 Once the device is connected, Windows will automatically detect the new device. Insert the device Driver Disk into the floppy disk drive of your system. Click Install the software automatically (Recommended) and click Next. - 14 -
Inhaltszusammenfassung zur Seite Nr. 17
2. Click Continue Anyway to proceed. 3. Wait while Windows copies the appropriate driver to your system. 4 Click Finish to complete the software installation. - 15 -
Inhaltszusammenfassung zur Seite Nr. 18
- 16 -
