Inhaltszusammenfassung zur Seite Nr. 1
MOTOROLA HK100
Quick Start Guide
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Congratulations Your MOTOROLA HK100 headset is designed for quick connections, clear calls, and lasting comfort. We’ve crammed all of the main features of your headset into this handy guide, and in a matter of minutes we’ll show you just how easy your headset is to use. So go on, check it out. more information on the Web: www.motorola.com/support Caution: Before using your headset for the first time, please read the important Safety, Regulatory & Legal information at the back of this gui
Inhaltszusammenfassung zur Seite Nr. 4
Your headset the important parts Microphone Call (on side) Button Status Light Ear Mini USB Speaker Earhook Charging Connector 2 Your headset
Inhaltszusammenfassung zur Seite Nr. 5
Charge it let’s get you up and running Indicator Light Red/Purple = charging Blue = fully charged Charge it 3
Inhaltszusammenfassung zur Seite Nr. 6
While your headset is charging, you won’t be able to use it. Note: Your battery is designed to last the life of your product. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage your headset. 4 Charge it
Inhaltszusammenfassung zur Seite Nr. 7
Basics a few essentials to get you started Turn it on & off Press and hold Call Button the Call button until you hear a series of tones. Note: For the Spanish and Mandarin versions, instead of tones, you hear voice prompts. Basics 5
Inhaltszusammenfassung zur Seite Nr. 8
Wear it Flex the ear hook and loop it over your ear. Make sure the speaker aligns with your ear canal, and the microphone is pointing towards your mouth. Your headset comes ready for use on your right ear. To change for left ear, just pull off the earhook, turn, and reinstall. 6 Basics
Inhaltszusammenfassung zur Seite Nr. 9
Pair & connect connect and go Pair & connect with your phone 1 Turn off any Bluetooth® devices previously paired with your headset. 2 Turn on the Bluetooth feature on your phone. 3 Turn on your headset (see “Turn it on & off” on page 5). The status light becomes steadily lit in blue. Note: When prompted for the passkey, enter 0000. When connected, you see the status light rapidly flash in blue and purple. Pair & connect 7
Inhaltszusammenfassung zur Seite Nr. 10
For daily use, make sure your headset is turned on, and your phone’s Bluetooth feature is on. Your headset and phone will connect automatically. Test your connection 1 Place the headset on your ear. 2 On the phone, dial the number you want to call and press the Call/Send key. If your phone and headset are successfully connected, you hear ringing on the headset. 8 Pair & connect
Inhaltszusammenfassung zur Seite Nr. 11
Restore to factory settings Caution: This action erases all pairing information stored in your headset. 1 Turn your headset off. 2 Press and hold the Call button and wait for a tone after hearing the startup tones (or voice prompt for the Spanish and Mandarin versions). Pair & connect 9
Inhaltszusammenfassung zur Seite Nr. 12
Calls it’s good to talk Note: Some call features are phone/network dependent. To... answer call Press the Call button. reject call Use phone to reject call. make a voice Press the Call button and you dial call hear a tone. end a call Press the Call button. answer or Follow the phone’s instructions. reject second call 10 Calls
Inhaltszusammenfassung zur Seite Nr. 13
To... adjust call Use volume buttons on phone volume to adjust volume. Calls 11
Inhaltszusammenfassung zur Seite Nr. 14
Status light know your headset if light shows... your headset is... off off three blue powering on/off flashes steady blue in pairing/connect mode rapid blue/purple connected to your phone flashes quick blue flash receiving or making a call slow blue pulse connected (on a call) slow blue flash in standby (not on a call—connected to the phone) 12 Status light
Inhaltszusammenfassung zur Seite Nr. 15
if light shows... your headset is... slow red flash idle (not connected to a phone) steady red trying to connect to your phone quick red flash in a low battery state Note: After 20 minutes of inactivity, the status light stops flashing to conserve power, but the headset remains on. Note: After 20 minutes of idle time (no connection to a phone), the headset turns off. Status light 13
Inhaltszusammenfassung zur Seite Nr. 16
Problems? we’ve got solutions My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the status light is flashing in blue, first turn off the other device, then turn the headset off and on. The status light becomes steadily lit in blue. My phone doesn't find my headset when searching. Make sure the status light on your headset is steadily lit in blue when your phone is searching for devices. If not, press and hold the Call
Inhaltszusammenfassung zur Seite Nr. 17
My headset will not pair with my phone. If the status light is not steadily lit in blue when your phone is searching for your headset, press and hold the Call button until your hear tones (or a voice prompt for Spanish and Mandarin versions), then turn the headset off and on, and the status light turns steady blue (see “Pair & connect” on page 7). My headset connected before, but now it's not working. Make sure the status light on your headset is steadily lit in blue when your phone is
Inhaltszusammenfassung zur Seite Nr. 18
Support we’re here to help If you have questions or need assistance, contact us at 1877MOTOBLU, or visit us at www.motorola.com/Bluetoothsupport or www.motorola com/bluetoothconnect. 16 Support
Inhaltszusammenfassung zur Seite Nr. 19
Safety, Regulatory & Legal Safety & General Information Safety Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR DEVICE. Use & Safety for Battery-Powered Accessories • Do not store or use your battery-powered accessory (such as a Bluetooth® headset or other device) in temperatures below -10°C (14°F) or above 60°C (140°F). • Do not recharge your accessory in temperatures below 0°C (32°F) or above 45°C (113°F). • Conditions inside a park
Inhaltszusammenfassung zur Seite Nr. 20
exceed RF energy exposure guidelines and may void your mobile device’s warranty. For a list of approved Motorola accessories, visit our Web site at: www.motorola.com Driving Precautions Responsible and safe driving is your primary responsibility when behind the wheel of a vehicle. Using a mobile device or accessory for a call or other application while driving may cause distraction. Using a mobile device or accessory may be prohibited or restricted in certain areas, always obey the laws an
