Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Copyright Information Copyright © 2006 by Oki Data Americas, Inc. All Rights Reserved Document Information OkiLAN 8300e Network Print Server Users Guide for the C6100 Series P/N 59385005, Revision 1.0 April, 2006 Disclaimer Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Copyright Information . . . . . . . . . . . . . . . . . . . . . . .2 Document Information. . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Trademark Information . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Introduction . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
Installation of TCP/IP Protocol . . . . . . . . . . . . . . . . . . . . .76 Windows 95/98/Me . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Windows NT 4.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Windows 2000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78 Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78 Network printer IP address configuration . . . . . . . . . . . . . .80 Windows 95/98/Me . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 5
Configuration Introduction The OkiLAN Internal Print Server is a fast 100BASE-TX/10BASE-T network interface. This network print server supports IEEE802.2, IEEE802.3, Ethernet-II and SNAP and can detect those frame types automatically. Also, it supports major protocols such as TCP/IP, EtherTalk, NetBEUI, Netware, Appletalk, and Rendezvous/Bonjour. This section details the specification and several software utilities. For multiple emulation printers, change the emulation in the Printer Menu s
Inhaltszusammenfassung zur Seite Nr. 6
Specifications CPU Falcon Frame types IEEE 802.2 IEEE 802.3 Ethernet-II, SNAP, AUTO Network interface 100BASE-TX 10BASE-T Network protocols TCP/IP Network layer ARP, RARP, IP, ICMP, IPV6, UPnP, AutoIP Session layer TCP, UDP Application layer LPR, FTP, TELNET, HTTP, IPP, BOOTP, DHCP, SNMP, SMTP, NCP, SAP, NLSP, RIP, NDS, NDPS, SPXII, Pure IP, SMP on TCP/IP, SMB on NetBEUI IPX/SPX (NetWare) Remote printer mode (up to eight file servers and 32 queues) Print server mode (up to eight pri
Inhaltszusammenfassung zur Seite Nr. 7
Self-diagnostic test With the printer power switched on, press the print server test button for more than three seconds and release. The self-diagnostic test results and configuration settings are printed. Printed self-diagnostic test sample If NG is displayed instead of OK see the Troubleshooting chapter. C6100 Series Network Users Guide Configuration - 7
Inhaltszusammenfassung zur Seite Nr. 8
Printed configuration settings sample networkinfo_pg1.jpg C6100 Series Network Users Guide Configuration - 8
Inhaltszusammenfassung zur Seite Nr. 9
networkinfo_pg2.jpg C6100 Series Network Users Guide Configuration - 9
Inhaltszusammenfassung zur Seite Nr. 10
Configuration Utility Available utilities You can configure the print server by using one of the following methods: Utility Features System requirements Quick Setup Configure the print server Windows95/98/Me/NT4.0/ easily and simply without 2000/XP (TCP/IP protocol or installing any software IPX/SPX protocol should be packages into your system. installed). You can set the following: To create a NetWare queue, Enable/disable TCP/IP, NetWare Client 32 or NetWare, EtherTalk, NetBEUI Intr
Inhaltszusammenfassung zur Seite Nr. 11
Utility Features System requirements SNMP The printer and print server Third-party vendor developed can be controlled using SNMP application. third-party vendor developed SNMP application. C6100 Series Network Users Guide Configuration - 11
Inhaltszusammenfassung zur Seite Nr. 12
Using Quick Setup Quick Setup utility allows you to configure the print server easily and simply without installing any software packages. You can configure the following: > Enable/disable TCP/IP, NetWare, EtherTalk, NetBEUI protocols. > Set IP address, Subnet Mask and Gateway for TCP/IP manually or by using DHCP. > Set NetWare mode and create Queue/Print Server/Printer objects. > Zone name and Port name for EtherTalk. Configuration requires a PC with Windows 95/98/Me, Windows 2000 Advanced
Inhaltszusammenfassung zur Seite Nr. 13
2. Select [Optional Utilities] netsofbutton.gif 3. Select [Install Quick Setup Utility]. install_configbut.gif 4. Select the language. admgr_qsetbut.gif sel_lang.gif 5. Select OKI Device Quick Setup. sel_quicksetup.gif 6. Follow the on-screen instructions. quicksetup.gif C6100 Series Network Users Guide Configuration - 13
Inhaltszusammenfassung zur Seite Nr. 14
> The NetWare Client 32 or IntranetWare Client should be installed on the PC used for the creation of network queues. Installation enables the user to create network queues and perform other functions. 7. If the settings are correct, click [Execute]. The new settings are transmitted to the network card but the network card is still operating with pre-transmission settings. 8. Click [Finish] to validate the new settings. Depending on the model, the printer may have to be switched off and on
Inhaltszusammenfassung zur Seite Nr. 15
Using a Web browser If the print server is connected to the network using TCP/IP, its settings and the printer menu settings can be configured using a Web browser, such as Microsoft Internet Explorer Version 4.0 and higher, or Netscape Navigator version 4.0 and higher. No guarantees are offered for other browsers. Refer to the relevant manuals for details of how to launch and use the browser. The network addresses used in this manual are shown as examples only. Network addresses used in yo
Inhaltszusammenfassung zur Seite Nr. 16
equivalents, see the description in the Configurable Items and Default Values table starting on page 50. 3. To ensure correct operation, follow the procedure below for the appropriate network browser. Microsoft Internet Explorer a. Select [Internet Options] in the [Tools] menu. b. Click on the [General] tab and click [Settings] in [Temporary Internet files]. c. Select [Every visit to the page] in [Check for newer versions of stored programs]. Netscape Navigator a. Select [Settings] in the [
Inhaltszusammenfassung zur Seite Nr. 17
6. After the new values are transmitted to the network card, the following screen is displayed. If a different message is displayed, check the settings. ENTERPASSWORD.bmp For example: For Ethernet address 00:80:92:01:00:D2, a default password is [0100D2]. The Ethernet address (MAC address) is displayed during the self-diagnostic test. The root password can be changed to allow you to configure the print server and printer by using a Web browser. The default password is the last six
Inhaltszusammenfassung zur Seite Nr. 18
The root password for configuration via Web browser is different for AdminManager/TELNET/FTP. These passwords can be set in AdminManager or TELNET. C6100 Series Network Users Guide Configuration - 18
Inhaltszusammenfassung zur Seite Nr. 19
Standard Setup Using AdminManager AdminManager is a powerful Microsoft Windows-based utility to configure all print server functions by using a graphical user interface. Configuration requires a PC with Windows 95/98/Me, Windows 2000 Advanced Server/Professional or Windows NT Server 4.0/ Work-station 4.0, Windows XP running TCP/IP or IPX/SPX (NetWare). This utility can only be used on a PC that can be connected to the network with TCP/IP or IPX/ SPX and must be used on a PC that is locate
Inhaltszusammenfassung zur Seite Nr. 20
Installation The following explanation uses Windows 98 as an example. 1. Insert the CD-ROM provided with your printer into the CD-ROM drive. If the Menu Installer does not start automatically, click Start→Run→Browse. Browse to your CD-ROM and click Setup→Οpen→OK. 2. Select [Optional Utilities] netsofbutton.gif 3. Select [Install Quick Setup Utility]. install_configbut.gif 4. Select the language. sel_lang.gif C6100 Series Network Users Guide Configuration - 20
