Inhaltszusammenfassung zur Seite Nr. 1
OkiLAN 8100e
USER’S GUIDE
Inhaltszusammenfassung zur Seite Nr. 2
PREFACE Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily consti
Inhaltszusammenfassung zur Seite Nr. 3
TABLE OF CONTENTS Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 OkiLAN 8100e Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Network printer IP address configuration . . . . . . . . . . . . . . . . . . 55 Windows 95/98/Me . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Windows NT 4.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Windows 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Windows XP . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 5
OKILAN 8100E CONFIGURATION Introduction The OkiLAN 8100e is a fast 100BASE-TX/10BASE-T network interface card for the OKI C5100, C5300, and B4300 printers. This user’s guide explains the functionality of the OkiLAN 8100e. Although the 8100e is integral to the C5100, C5300 and is added as a Network Interface Card (NIC) to the B4300, access for interconnection and producing self-diagnostic test and configuration printouts is provided in both cases via an interface panel at the rear of the printer
Inhaltszusammenfassung zur Seite Nr. 6
Specification Frame types IEEE 802.2 IEEE 802.3 Ethernet-II, SNAP, AUTO Network interface 100BASE-TX 10BASE-T Network protocols TCP/IP Network layer ARP, RARP, IP, ICMP Session layer TCP, UDP Application layer LPR, FTP, TELNET, HTTP, IPP, BOOTP, DHCP, SNMP, DNS, SMTP, POP3, SLP IPX/SPX (NetWare) Remote printer mode (up to eight file servers and 32 queues) Print server mode over IPX/SPX (up to eight print servers) Encrypted password supported in print server mode SNMP EtherTalk ELAP, AARP, DDP
Inhaltszusammenfassung zur Seite Nr. 7
test, AdminManager, WEB and TELNET, use of these protocols is not supported in the C5100. Self-diagnostic test With the printer power switched on, press the push-button located on the network interface panel (at the rear of the printer) for more than three seconds and release. The self-diagnostic test results and configuration settings are printed. On the first page of the Network Information that is printed out, under the heading General Information the MAC Address is given. For example: MAC Ad
Inhaltszusammenfassung zur Seite Nr. 8
Configuration utility Available utilities You can configure the OkiLAN 8100e by using one of the following methods: Utility Features System requirements Quick Setup Configure the OkiLAN 8100e easily Windows95/98/Me/NT4.0/2000/ and simply without installing any XP (TCP/IP protocol or IPX/SPX software packages into your protocol should be installed). system. You can set the following: To create a NetWare queue, Enable/disable TCP/IP, NetWare, NetWare Client 32 or IntranetWare EtherTalk, NetBEU
Inhaltszusammenfassung zur Seite Nr. 9
Using Quick Setup Quick Setup utility allows you to configure the OkiLAN 8100e easily and simply without installing any software packages. You can configure the following: > Enable/disable TCP/IP, NetWare, EtherTalk, NetBEUI protocols. > Set IP address, Subnet Mask and Gateway for TCP/IP manually or by using DHCP. > Set NetWare mode and create Queue/Print Server/Printer objects. > Zone name and Port name for EtherTalk. Configuration requires a PC with Windows 95/98/Me, Windows 2000 Advanced Ser
Inhaltszusammenfassung zur Seite Nr. 10
The following explanation uses Windows 98 as an example. 1. Insert the Network Software CD-ROM into the CD-ROM drive. The Setup Utility starts automatically. If it does not start, double- click setup.exe in the Windows folder on the CD-ROM. 2. Select [Network Card Setup] 3. Select [Network Card Quick Setup]. 4. Select the appropriate language. 5. Follow the on-screen instructions. > The NetWare Client 32 or IntranetWare Client should be installed on the PC used for the creation of network queu
Inhaltszusammenfassung zur Seite Nr. 11
To create a NetWare queue, NetWare Client 32 or IntranetWare Client should be installed on to your system. The following explanation uses Windows 98 as an example. Installation 1. Insert the Network Software CD-ROM into the CD-ROM drive. The Setup Utility starts automatically. If it does not start, double- click autorun.exe in the Windows folder on the CD-ROM. 2. Select [Network Card Setup]. 3. Select [Network Card Standard Setup]. 4. Select the appropriate language. 5. Follow the on-screen ins
Inhaltszusammenfassung zur Seite Nr. 12
Interface Select [Start]-[Programs]-[OKI Setup Utility]-[Admin Manager]. File menu In the [File] menu, the following item can be selected: Item Function Search Search printers in your network and list all printers that have the OkiLAN 7100e, 7100e+, 7200e, 7300e and 8100e installed. Status Menu In the [Status] menu, the following items can be selected: Item Function Printer Status Current printer status is displayed: System Status Displays current OkiLAN 8100e configuration. Configuration da
Inhaltszusammenfassung zur Seite Nr. 13
Item Function List of Configuration Items Displays current OkiLAN 8100e configuration. Configuration data can be saved as log file. Setup Menu In this menu, the following items can be selected: Item Function Oki Device Setup Configure the OkiLAN 7100e, 7100e+, 7200e, 7300e, 8100e. Setup by HTTP Launch the default browser in your environment to access the selected printer’s web page. Setup by TELNET Launch TELNET application in your environment to access the selected printer’s TELNET port. N
Inhaltszusammenfassung zur Seite Nr. 14
Oki Device Setup Oki Device Setup allows you to configure the OkiLAN 8100e. Type the root password (default value is the last 6 characters of the MAC address) to configure. Remember that the root password is case sensitive and if the MAC address contains any alpha characters, type them as upper case. Oki Device Setup contains details for the following selectable tabs: > General >TCP/IP >NetWare >EtherTalk >NetBEUI >SNMP > POP (if your printer supports E-Mail reception) >SMTP > Maintenance The f
Inhaltszusammenfassung zur Seite Nr. 15
Location Comments Change root password You can set/change the root password for AdminManager, TELNET and FTP. TCP/IP Tab This allows you to configure TCP/IP related items. Location Comments Use TCP/IP Set TCP/IP protocol as enabled/disabled. Protocol Use DHCP/ Check this item if IP address, subnet mask, default gateway and IP BOOTP addresses for DNS primary server and secondary servers are retrieved from the DHCP or BOOTP server. Otherwise, uncheck. Use RARP Check this item if IP address i
Inhaltszusammenfassung zur Seite Nr. 16
Location Comments Network PnP Configure items related to Network PnP. Setup ... In this dialogue box, the following items can be configured> Auto IP address Set to get IP address dynamically by Auto IP, enabled or disabled Use Network PnP Set notifying users with using UPnP supported OS of the printer, enabled or disabled Device Name Set the device name for Network PnP Netware Tab This is where you can configure NetWare related items. Location Comments Use NetWare Protocol Set NetWare pro
Inhaltszusammenfassung zur Seite Nr. 17
Location Comments Bindery Setup Configure items related to Bindery mode. In this dialogue box, the following items can be configured. Available File Server and Select file servers to Selected File Server. connect. Up to eight file- servers can be selected. Select a server from Available file server list and click >> button. The server is copied to Selected file server box. Password. Set password for Print Server. Job Polling Time. Set print job polling interval in seconds. NDS Setup S
Inhaltszusammenfassung zur Seite Nr. 18
Location Comments RPRINTER Setup Available if you select RPRINTER mode in Operation Mode. By selecting the [RPRINTER] button, this is displayed: NDS or Bindery Show the Available print server tree in NDS mode or Bindery mode. Available print server and Select file servers to Selected print server connect. Up to eight fileservers can be selected. Select a server from Available file server list and click >> button. The server is copied to Selected file server box. Time Out Set duration
Inhaltszusammenfassung zur Seite Nr. 19
EtherTalk Tab This allows you to configure EtherTalk related items Location Comments Use EtherTalk Protocol Set EtherTalk protocol to enabled/disabled. Printer Name Set EtherTalk Printer object name. Zone Name Set the zone name to which the OkiLAN 8100e belongs. NetBEUI Tab This allows you to configure NetBEUI related items. Location Comments Use NetBEUI Protocol Set NetBEUI protocol to enabled/disabled. Computer Name Set a computer name for the OkiLAN 8100e. Workgroup Set a work group name to
Inhaltszusammenfassung zur Seite Nr. 20
SNMP Tab This allows you to configure SNMP related items. Location Comments Authentic This community name is used to check whether incoming SNMP Community requests have the correct community name or not. The community name is displayed as ****** for security reasons. TRAP Community This community name is assigned to outgoing system traps such as cold start, authentication failure, etc. TRAP Address Set a destination IP address of a Trap packet. If 0.0.0.0 is set, the Trap is disabled. Sys
