Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Contents Passport Basics ................................................................................................................................................................. 1 Checklist .................................................................................................................................................................................................1 About this guide .......................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
Passport Basics Congratulations and thank you for purchasing the Kyocera Passport PC Card. Passport is a dual-band 1X EVDO PC card that enables you to communicate wirelessly from your laptop at high speeds on CDMA networks with all the benefits of CDMA technology. The modem offers 2G data transmission at 14.4 kilobits per second (Kbps); and 3G data transmission for 1X RTT at up to 143 Kbps, and 1XEVDO at up to 2.4 Mbps. With the modem installed in your PC, you can send and receive email messa
Inhaltszusammenfassung zur Seite Nr. 4
Account Activation To use Passport, the card must be activated. Activation is the process of configuring your modem to use your account. Depending on how you purchased your modem, it may have been pre-activated. If the modem has not been pre-activated, when you insert the modem for the first time, the Activation Wizard will launch automatically. The wizard will guide you through the activation process. Power Management Passport is designed to take advantage of the power management and system
Inhaltszusammenfassung zur Seite Nr. 5
Installation Warning: DO NOT insert the Passport PC card before you install the software onto your notebook PC. Once you install the software and drivers you will be prompted to insert Passport into the Type II PC Card slot. Once the card is inserted, do not physically remove Passport from the PC Card slot until you have completed the Unplug/Eject process. Removing the card improperly may cause a fatal error to your PC. See “Removing Passport from the PC” on page 5. System Requirements ® Your
Inhaltszusammenfassung zur Seite Nr. 6
10. Double-click the Passport Navigator icon. . The connections window appears. PLEASE INSERT CARD shows in the lower-left corner. 11. Insert your Passport PC card into your notebook’s PC card slot with the label facing up. Raise the antenna so that it is fully extended and pointed up at a 90° angle. Use in any other configuration may exceed FCC RF exposure limits. Recognition of your card could take a few minutes while your computer recognizes the new software drivers that were installed in
Inhaltszusammenfassung zur Seite Nr. 7
14. Enter your Lock Code (provided by your PC card vendor) and click Next. The Wizard activates your PC card. Activation may take a few minutes. 15. Click Next. The wizard requests your Phone Number (MDN) and MSID (IMSI_M). Both are provided by your PC card vendor. 16. Enter your MDN and MSID and click Next. The wizard indicates that the configuration was successful. 17. Click Finish to exit the wizard and return to the Passport Navigator screen. Once your Passport PC card is recognized, the con
Inhaltszusammenfassung zur Seite Nr. 8
5. Remove the Passport PC card from your notebook. When removing Passport, always grip it by the sides of the card rather than from the top. Pulling on the antenna over time may damage the card. If available, use the Card Ejector tool on your laptop. 6 User Guide for the Kyocera Passport PC Card
Inhaltszusammenfassung zur Seite Nr. 9
Connecting to Passport Navigator Connecting Navigator manages the modem’s connections, which is your passport to the internet. Use Navigator to connect to the internet, to check status, and to obtain information on your card and connection. 1. Insert your Passport PC card into the PC slot. 2. Double-click on the Passport Navigator icon on your desktop. -or- Select the Start → Programs → Kyocera Passport Navigator 2→ Passport Navigator. 3. Select your desired connection type and click the Conne
Inhaltszusammenfassung zur Seite Nr. 10
Understanding Navigator Connections Tab The Connections tab allows you to manage your wireless connections. This tab is displayed at the startup of Passport Navigator and initially shows the following information: Wireless Network Connections shows the available connections from which you can select. Connections can include 1x-EVDO, 2GPassport, 3GPassport, etc. Your PC card vendor may have there own connection listed here. Signal Strength is shown in the icon to the right of each con
Inhaltszusammenfassung zur Seite Nr. 11
Status Bar Icons The Status Bar (bottom of the screen) contains various icon indicators. Depending on your PC card vendor, your Passport Navigator product may not contain all the icons described here. Signal Strength. The more bars, the better the signal stength. EVDO connection. When icon is active (yellow), an EVDO connection is established. IX connection. When icon is active (yellow), a IX connection is established. Note: If both EV and IX icons are active, an EVDO connection is establi
Inhaltszusammenfassung zur Seite Nr. 12
Messaging Tab The Messaging tab allow you to send, save, read, and delete Short Messaging Service (SMS) messages. The tab contains two main sections—Mailbox and New Message. Mailbox shows the contents of all your mailboxes. It contains: Mailbox selection combo-box lets you select from the available mailboxes—Inbox, Sent Items, and Drafts. Inbox shows any received messages. Sent Items shows any sent messages. Drafts shows any messages entered, but not sent. Mailbox content field
Inhaltszusammenfassung zur Seite Nr. 13
Connection History Tab The Connection History tab shows a log of all connection activity. It contains: Filter allows you to select a history list by connection type (All, 1xEVDO, 1xRTT, IS95A, IS95B, or Unknown). History list shows detailed information about each connection, including: Dialed phone number Call type (1xRTT, 1xEVDO, etc.). Date and time connected Call duration Byte sent Byte received Total bytes counter (per call) IP Address used for connection
Inhaltszusammenfassung zur Seite Nr. 14
Address Book Tab The Address Book tab allows you to Add, Edit, Delete, and Search for contacts stored on your Passport PC card. You can also send a message to a selected contact. It contains: Group combo-box lets you select a group of contacts to display in the contacts list. Search field lets you search for a contact in the contacts list. For example, entering ba would return any contacts beginning those letters, like barbara, barry, etc. Contact List shows all contacts available
Inhaltszusammenfassung zur Seite Nr. 15
Other Navigator Features When you select Tools from the top menu, the following additional options are available: Lock PC Card (can also be Unlock PC Card) Power off (can also be Power on) Preferences These features are described below. Lock PC Card Selecting Lock PC Card lets you to lock your Passport PC card. You’ll need your lock code (provided by your PC card vendor). Once locked, the card is useless to another user since only you know the code to unlock it. Note: The Lock PC Ca
Inhaltszusammenfassung zur Seite Nr. 16
Power off Selecting Power off lets you conserve your PC's power, by turning off power to the Passport PC Card when the card is not used. Think of this as an “On/Off switch” for your PC Card. Follow these steps to power off your card: 1. When your PC Card is powered on and connected, your Passport interface looks similar to this. 2. Select Tools → Power off from the top menu. A prompt asks if you want to terminate your connection. 3. Click Yes. 4. A prompt tells you to wait while your PC Card
Inhaltszusammenfassung zur Seite Nr. 17
5. When the Power Off is complete, your Passport inteface looks like this (see illustration). PC CARD IS POWERED OFF appears in the bottom left corner. The green Disconnect button changes to a grey Connect. Your Passport PC Card is now powered off and helping conserve the power used by your PC. Follow these steps to power on your PC Card: 1. Select Tools → Power on from the top menu. A prompt tells you to wait while your card is powering on. 2. Once the card powers on, the grey Connect butt
Inhaltszusammenfassung zur Seite Nr. 18
Preferences Selecting Preferences opens a sub menu of additional PC Card settings. Show Welcome Screen check box. This enables showing of the Welcome Splash Screen when you start Passport Navigator. This option is enabled by default. Start in System Tray check box. Specifies whether the Passport Navigator application starts “minimized” (i.e., appearing in the System Tray rather than open on the screen). This option is disabled by default. Launch at Windows Startup check box. Speci
Inhaltszusammenfassung zur Seite Nr. 19
About your PC card You can access details about your Passport PC card. From the top menu, select Help > About. The About screen is displayed, with the following information about your PC card. Manufacturer (Kyocera Wireless Corp.) Model Hardware revision Firmware revision. PRL version ERI version ESN in both decimal and hexadecimal format MDN (your phone number) MIN (Mobile Identification Number)\ Activation status Security lock Device capability RSSL. Cu
Inhaltszusammenfassung zur Seite Nr. 20
Regulatory and Safety Information This Section outlines important regulatory notices concerning your new Passport PC card. FCC ID:OVFKWC-KPC650, IC:3572A-KPC650 Regulatory Notices FCC/IC Notice: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparat
