Inhaltszusammenfassung zur Seite Nr. 1
IRt/c Accessories
Transmitter
The t/c.XMTR is specifically designed to interface any model IRt/c by a
IRt/c.XMTR
simple thermocouple connector or splice. The two wire current loop can
be used in any conventional 4-20mA, 0-5V or 0-10V circuit that is scaled
for the temperature range of interest.
In-Line Pre-Calibrated 4-20
mA Transmitter For OEMs, IRt/c sensors and t/c.XMTR can be supplied pre-wired
together.
· Use any existing wiring, for easy low cost installation
· Use existing PLC, computer o
Inhaltszusammenfassung zur Seite Nr. 2
IRt/c Accessories 0 IRt/c for Ambient >100 C Cooling Requirements Up to 450°F (230°C), air alone can provide sufficient cooling with the Cooling Jacket Kit. As the Air Cooling Chart illustrates, considerably less air is required to cool an IRt/c with a CJK-1 or CJK-2, than an IRt/c.5. For this reason, the IRt/c is recommended for hot areas if it is possible to bring the sensor close to the target. The air cooling chart extends above the recommended 450°F (230°C), and can be used there, but cauti
Inhaltszusammenfassung zur Seite Nr. 3
IRt/c Accessories Cooling Jacket Kits CJK-1 for IRt/c, IRt/c.3X, IRt/c.1X Water/Air Cooling A convenient and inexpensive kit makes it possible to use the IRt/c with air, water, or both for service in All Stainless Steel Housing harsh environments. Measuring only 1" x 4.16" (25 x 106 mm) overall, the CJK-1 is physically small enough to fit into tight areas and closely monitor Water Coil IRt/c.2 process temperatures from the optimum position - up Spring close. With its all stainless steel housing,
Inhaltszusammenfassung zur Seite Nr. 4
IRt/c Accessories Cooling Jacket Kits CJK-2 For IRt/c.3X only Air Only Cooling Features • Cooling up to 750°F (450°C) • Small size - 1" dia. x 3" lg. (76 x 25.4mm) • Stainless steel housing • Available with brass or stainless fittings • Air purge included • Ultra-efficient design for low air consumption and maximum cooling efficiency • Side venting for variable air flow 51 Water Street, Watertown, MA 02172 USA 51 51 51 51 51 CO RPORA TI O N 800-422-3006 • 617-923-9900 • Fax 617-923-9911
Inhaltszusammenfassung zur Seite Nr. 5
IRt/c Accessories IRt/c Accessories MB-1 Multi-Purpose Mounting Bracket APK-1, APK-2 The convenient Air Pump Kit allows for fast and easy installation of Pumps for Purge Air an air source suitable for maintaining optical cleanliness of IRt/c’s in APK-1 120 VAC dirty, dusty environments. Its air flow is sufficient to keep up to five APK-2 12 VDC IRt/c.2, or one IRt/c.5 clean. Additionally, the air flow is sufficient to allow an IRt/c.2 to operate in ambients up to 240°F (115°C). The pump can be m
Inhaltszusammenfassung zur Seite Nr. 6
IRt/c Accessories IRt/c Accessories Connector Kit • Easy Installation of IRt/c, with up to 1000' Thermocouple Connectors (300 m) Extension Cable with Shield • Connector Ground Protects Against Electrical Noise Errors • Write-On Area for Easy Identification to assure high accuracy. Each connector includes a • Superior Mechanical Connection Prevents write-on insert and an external ground strap to Signal Loss due to Vibration or Wire Movement maintain the electrical connection of the ground wire an
Inhaltszusammenfassung zur Seite Nr. 7
IRt/c Accessories Gooseneck Mounting Kit GMK-1 For fast, convenient testing of IRt/c’s For fast and convenient mounting of IRt/c’s, especially for testing, the Gooseneck Mounting Kit provides an inexpensive method to quickly install an IRt/c directly on the production line. Its heavy duty design provides excellent stiffness for reliable positioning. Clamps are fabricated of aluminum for durable performance. The sensor clamp fits all IRt/c models (the MB-1 Mounting Bracket is required for Adj
