Inhaltszusammenfassung zur Seite Nr. 1
PCI 1M PhoneLine
Network Adapter
Quick installation Guide
M73-APO01-120
Inhaltszusammenfassung zur Seite Nr. 2
REGULATORY STATEMENTS Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interface, and 2. This device must accept any interface received, including interface that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protect
Inhaltszusammenfassung zur Seite Nr. 3
FCC Part 68 Registration This device complies with FCC Part 68 rules, and the use of this device is subject to the following restrictions: 1. The FCC has established rules which permit this device to be directly connected to the telephone network. Standardized jacks are used for these connections. This equipment should not be used on party lines or coin phones. 2. If this device is malfunctioning, it may also be causing harm to the telephone network; this device should be disconnect
Inhaltszusammenfassung zur Seite Nr. 4
INTRODUCTIONS The PCI 1M PhoneLine Network Adapter enables the instant connectivity to multiple PCs over a home's existing telephone lines. You can share network-enabled printers, transfer files between computers, play network games, and more- no switches, hubs, or even any additional cables is needed. The network runs on standard home-grade telephone wires just like the ones you use everyday. Plus, it doesn’t interfere with your normal phone use. Features • Connects to a network
Inhaltszusammenfassung zur Seite Nr. 5
• Windows 98 all version • Windows 2000 ready HARDWARE INSTALLATION Before you begin, make sure you turn off all power to your computer. 1. Remove the chassis cover of your computer. 2. Align the contact edge of the PCI 1M PhoneLine Network Adapter toward the connector of any free PCI Bus Master expansion slot. Push firmly and slowly until it is fully seated in the connector. 3. Screw the PCI 1M PhoneLine Network Adapter to the computer chassis with the provided screws. 4. Rep
Inhaltszusammenfassung zur Seite Nr. 6
SOFTWARE INSTALLATION Once your PCI 1M PhoneLine Network Adapter has been successfully installed into the computer, turn on your computer and the system will automatically detect the new hardware. Insert the driver diskette for the PCI 1M PhoneLine Network Adapter into the floppy disk drive. To efficiently help you to setup the proper driver for your PCI 1M PhoneLine Network Adapter, an on-line documentation named README.TXT was provided in the folder/subdirectory corresponding to the
