Inhaltszusammenfassung zur Seite Nr. 1
OWNER'S MANUAL
VESTAX CORPORATION
VESTAX EUROPE
Inhaltszusammenfassung zur Seite Nr. 2
CAUTION 2 IMPORTANT SAFEGUARDS 4 FEATURES 5 BEFORE USE 6 FUNCTION 6 CD SECTION 7 MIXER SECTION 11 FRONT PANEL 11 REAR PANEL 12 CONNECTION EXAMPLE 12 GETTING THE MOST OUT OF THE CDX-16 13 SPECIFICATIONS 14
Inhaltszusammenfassung zur Seite Nr. 3
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequeney energy and, If not installed and used in accordance with the lnstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wil
Inhaltszusammenfassung zur Seite Nr. 4
READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read instructions-All the safety and operating 10. Power sources-This product should be operated only instructions should be read before the appliance is from the type of power source indicated on the operated. marking label. If you are not sure of the type of power sup
Inhaltszusammenfassung zur Seite Nr. 5
19. Replacement Parts-When replacement parts are 17. Servicing-Do not attempt to service product required, be sure the service technician has used yourself as opening or removing covers may expose replacement parts specified by the manufacturer or have you to dangerrous voltage or other hazards. Refer the same characterristics as the original parts. all servicing to qualified sersonnel. Unauthorized substitutions may result in fire, electric 18. Damage Requiring Service-Unplug this product shock
Inhaltszusammenfassung zur Seite Nr. 6
BEFORE USE Using CDs. A conventional CD consists of two (2) sides. Typically one side bears a label stating the name of the CD and artist whilst the front side, rainbow like in its color, contains the information that makes this technology work. There are approximately six (6) million data items stored on any one given CD front surface. Please make sure to load the CD into the playing mechanism correctly, so that the front side (rainbow) is unable to be seen once the lid is closed. Unlike conv
Inhaltszusammenfassung zur Seite Nr. 7
PITCH CONTROL FADER Used to adjust the playing pitch (speed) by up to +/- 8%, +/- 16%. As this fader is 100mm in length you are able to make both major and subtle adjustments in the playing pitch of any given CD sound source. Typically, this fader is used to make subtle adjustments that allow for beat matching/mixing that results in you ultimately being able to move from one track to another without an audible difference. PITCH LOCK INDICATOR When the light is on Pitch Lock is active. When
Inhaltszusammenfassung zur Seite Nr. 8
[3] Search Function Whilst pause is activated, the joystick when moved from left to right will do so in 1-75 frame units for the purpose of aiding track or point search. This is especially useful when recalling an exact start point far from the start or end point or a particular track. stick left Scans backward. stick right Scans forward. The information (data) on a CD is written at approximately 75 frames per second. PREVIOUS BUTTON Used for skipping backwards to the starting point of the c
Inhaltszusammenfassung zur Seite Nr. 9
CUE INDICATOR When the cue point is set the LED will be on. SINGLE / CONTINUE BUTTON This button is used to switch between single play, single repeat and all repeat modes. When the unit is first switched on this mode will be set to OFF, meaning that at the end of the CD's final track the CD will stop. Press the single/continue button once and the AUTO CUE SINGLE mode will be selected. Set to this mode the current track will be repeated until it is stopped. Press the single/continue button t
Inhaltszusammenfassung zur Seite Nr. 10
DISPLAY [1] Indication of motion status Open The top loading CD tray is open. Read The CD mechanism is reading the TOC data from the CD. No Disc The CD tray is closed and there is no disc or the disc has a reading error. Sleep The CD mechanism/motor has been stopped. [2] DISPLAY aPLAY cCONTINUE eTIME BAR bPAUSE dAUTO CUE SINGLE fPITCH DISPLAY CONTINUE AUTO CUE SINGLE REMAIN gTRACK No. hMINUTES iSECONDS jFRAMES kREMAIN (a) PLAY The CD is in play mode. (b) PAUSE The CD is in pause mode. (c)
Inhaltszusammenfassung zur Seite Nr. 11
INPUT SELECT SWITCH Used to select the input source (Phono, Line, CD) sent to the designated PGM (A,B). MONITOR SELECT SWITCH Used to select the signal for monitoring (headphone). Selection is made irrespective of the position of the crossfader and can be set to either PGM A, B or to Mix. The selected PGM monitor signal can be heard through the left (side) headphone whilst the main output signal is heard in the right headphone. When set to MIX the master signal can be monitored through both
Inhaltszusammenfassung zur Seite Nr. 12
POWER GROUND (GND) TERMINAL MIX OUTPUT JACK Connection of this terminal to the grounding out lead of a turntable will reduce unnecessary hum and noise. CD OUTPUT JACK PHONO INPUT JACK AC POWER CORD LINE INPUT JACK POWER ON/OFF SWITCH CONNECTION EXAMPLE PROFESSIONAL MIXING CONTROLLER INPUT SELECTOR INPUT 1 INPUT 2 INPUT 3 INPUT 4 MIC PHONO 1 LINE 1 PHONO 2 LINE 2 PHONO 3 LINE 3 PHONO 4 LINE 4 LEVEL MAIN MIC PGM 1 PGM 2 PGM 3 INPUT INPUT INPUT +8 MIN
Inhaltszusammenfassung zur Seite Nr. 13
GETTING THE MOST OUT OF THE CDX-16 1.Switch your CDX-16 on, you'll find the on/off switch on the left side of the rear panel. 2.Open the CD tray(s) and put in your CD. Make sure that the CD has been placed flat and in the tray with the front side facing the mechanism (so that you can see the label side through the tray's window. Close the tray 3.Press the PLAY button. 4.The CD will now be playing and you will be able to fully control the CDís status through all the various controls. For exampl
Inhaltszusammenfassung zur Seite Nr. 14
SPECIFICATIONS
Inhaltszusammenfassung zur Seite Nr. 15
Inhaltszusammenfassung zur Seite Nr. 16
Vestax Corporation
