Bedienungsanleitung Addonics Technologies DDU3SAS

Inhaltszusammenfassung zur Seite Nr. 1

ENT
ESC
T E C H N O L O G I E S
User Guide
1:3 Blu-Ray / DVD Duplicator
(DDU3SAS)
www.addonics.com
v3.1.11
CONTACT US
Technical Support
www.addonics.com
If you need any assistance to get your unit functioning properly, please have your
Phone: 408-573-8580
product information ready and contact Addonics Technical Support at:
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/ Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/

Inhaltszusammenfassung zur Seite Nr. 2

ENT ESC Diagram Source SATA Port 3 Destination (top port) SATA Ports 15-pin SATA Power Connector Mounting Holes (2 on each side) LCD Scroll Up Duplicator Panel ENT Executes Function ESC Cancels Function Scroll Down 1 10 Technical Support: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/

Inhaltszusammenfassung zur Seite Nr. 3

12.19 Quick Compare Quick Guide Quick Compare is related to function#5 Compare. Once compare error byte reach to the setting figures, compare process will stop. Installing the 1:3 optical duplicator 12.20 Link Mode Select (Select Models) Now press ESC and ▼ to enter the following screen. Press ENT to enter the “Link Mode Select” Step 1 screen. Use ▲ ▼ to choose between the Stand Alone, Middle Tower or Last Tower modes as Insert the 1:3 Blu-Ray / DVD Duplicator into standard 5.25” drive bay. a

Inhaltszusammenfassung zur Seite Nr. 4

To select any function from #1 to # 13 as the first item appears on the screen whenever system is turned on. Panel Functions 12.6 Auto Verify LCD To set if auto verify target disc's readability after copy function. The default is Off. Press ▼ to select On. Scroll Up Duplicator Panel 12.7 Auto Compare To set if auto do comparison after copy function to check if source and target disc are identical. The default is Off. Press ▼ to select On. ENT Executes Function 12.8 Auto Prescan ESC Cancels Funct

Inhaltszusammenfassung zur Seite Nr. 5

10.3 Close Session 1. Copy Single session format is used for Audio CD, and commercial audio player is not able to play open Function#1 Copy, instant copy source (disc/image) to the target drives (optical writes). Use Function#8 session audio CD, therefor session must be closed to max. playback compatibility. However, no to select source drive before copying. Select function#1. place a source disc into source drive and blank more tracks can be added once session is closed. disc into the target

Inhaltszusammenfassung zur Seite Nr. 6

9. Image 9.9 Format HDD Hard disk must be formatted by the system for the very first time. Hard disk will be partitioned into Function#9 Image is valid only when a hard disk is installed. Disc is loaded to hard disk as an the chosen partition format. If no hard disk is installed, LCD will show the message as No Valid HDD! image file. All data on the hard drive will be erased after the hard disk format. After the hard drive is formatted correctly, LCD will show “ Format HDD ok!.”, Press ENT to