Bedienungsanleitung Vestax PMC-05ProIII

Inhaltszusammenfassung zur Seite Nr. 1

OWNER'S MANUAL

Inhaltszusammenfassung zur Seite Nr. 2

CONGRATULATIONS Thank you for your purchasing the VESTAX PMC-05ProIII, Professional Mixing Controller. We suggest that you read through this owner's manual thoroughly so that you may enjoy the full use of this product safely and in the knowledge of all its special features and suitable applications. CONTENTS CAUTION 2 IMPORTANT SAFEGUARDS 3 FEATURES 4 FUNCTIO N 5 TOP PANEL 5 FRONT PANEL 7 REAR PANEL 7 HOW TO CHANGE THE FADER UNIT 8 CONNECTION 10 SPECIFICATIONS 11

Inhaltszusammenfassung zur Seite Nr. 3

READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read instructions-All the safety and operating 11. Lightning-For added protection for this product instructions should be read before the appliance during lightning storm, or when it is left is operated. unattended and unused for long periods of time, 2. Retain instruc

Inhaltszusammenfassung zur Seite Nr. 4

16. Replacement Parts-When replacement parts are 18. Carts and Stands-The appliance should be used required, be sure the service technician has used only with a cart stand that is recommended by replacement parts specified by the manufacturer manufacturer. or have the same characterristics as the original parts. Unauthorized substitutions may result in 19. An appliance and cart combination should be fire, electric shock or other hazards. moved with care. Quick stops, excessive force, and uneven

Inhaltszusammenfassung zur Seite Nr. 5

FUNCTIONS TOP PANEL

Inhaltszusammenfassung zur Seite Nr. 6

qMAIN MIC LEVEL Adjusts the input level of the MAIN MIC input. wMIC EQs Adjusts the HI and LOW frequencies for both the MAIN and SUB MIC input. eMIC PAN Adjusts the panning for both the MAIN and SUB MIC. rTRIM (PGM1/PGM2) Adjusts the input level of each channel. For optimal acoustic quality, set the INPUT FADER to a position of 7 or 8 then adjust the TRIM so that a sufficient signal is fed through the channel without distorting. tPGM EQs (PGM1/PGM2) Adjusts the HI and LOW frequencies for eac

Inhaltszusammenfassung zur Seite Nr. 7

FRONT PANEL @1PHONE JACK @3EFFECT SEND JACK Connect the headphones with the impedance of Connect to the input of the external effects. 8ohm to 600ohm. (Delay, Reverb etc) @2EFFECT RECEIVE JACK Connect to the output of the external effects. REAR PANEL connected, the signal from the turntable is fed to the @4SUB MIC LEVEL respective PGM when the Phono Input is selected. Adjusts the input level from SUB MIC IN. @5MAIN/SUB MIC JACK @8GROUND TERMINAL Input jack for MAIN/SUB MIC. Connect th

Inhaltszusammenfassung zur Seite Nr. 8

HOW TO CHANGE THE FADER UNIT q Remove the fader knobs. (See fig-a) w Remove the 4 screws which fix the top panel. (See fig-a) e Remove the 2 screws which fix the fader panel, and remove the fader unit from position in mixer. (See fig-b) r Carefully remove the multi-cable connector from the fader unit. t Remove the fader knob of new fader unit. y Attach multi-cable connector to new fader unit. (See fig-c/d) u Position the new fader unit carefully and secure with screws.

Inhaltszusammenfassung zur Seite Nr. 9

HOW TO CHANGE INPUT SELECT SWITCH q Remove the top panel in the same procedure. e Carefully remove the multi-cable connector from the switch unit. (See fig-f) (See fig-a) w Remove the 2 screws which fix the switch panel, fix the r Attach multi-cable connector to new switch unit. switch panel, and remove the switch unit from tPosition the switch unit carefully, and secure with position in mixer. (See fig-e) screws. HOW TO CHANGE THE DIRECTION INPUT SELECT SWITCH q Remove the top panel in the sam

Inhaltszusammenfassung zur Seite Nr. 10

CONNECTION

Inhaltszusammenfassung zur Seite Nr. 11

SPECIFICATION

Inhaltszusammenfassung zur Seite Nr. 12

III q Vestax Corporation