Bedienungsanleitung Stanton SMX-401

Inhaltszusammenfassung zur Seite Nr. 1

SMX-401
P R O F E S S I O N A L DJ MIXER
OWNER’S M A N U A L
STANTON MAGNETICS, INC
info@stantonmagnetics.com • (954) 689-8833
w w w . s t a n t o n d j . c o m
© 2003, Stanton Magnetics, Inc.

Inhaltszusammenfassung zur Seite Nr. 2

W E L C O M E ! W A R R A N T Y Thank you for making Stanton professional quality features. This unit has been designed and manufactured using quality compo- your first choice in professional DJ Stanton and your authorized nents. Therefore, it is warranted to be free from defects in materials mixers. Stanton dealer are dedicated to (limited as specified below), and workmanship for a period of twelve your complete satisfaction by (12) months from the original purchase date. During this period, al

Inhaltszusammenfassung zur Seite Nr. 3

T E C H N I C A L S P E C I F I C AT I O N S SMX-401 FEA T U R E S Line Inputs: 2 (RCA) x 3 channels, -10 dBV /10 kOhm When Stanton set out to Phono Inputs 2 (RCA) x 3 channels, -50 dBV / 47 kOhm design its new SMX-401 3- Mic Inputs 1(1/4")/ 1 XLR -50 dBV /4.7 kOhm Channel DJ Mixer, compro- Return Inputs 2 (1/4"), -10 dBV / 10 kOhm Send Outputs 2 (1/4"), -10 dBV mise was not an option. This Master Outputs 2 (1/4”) Balanced/ (RCA) unbalanced, 10" professional mixer -2 dBu balanced / -10 dBV unbal

Inhaltszusammenfassung zur Seite Nr. 4

DESCRIPTION OF FUNCTIONS FADER CLEANING AND REPLACEMENT ing all traces of dirt and contamination. 4. Remove the fader track (G) by slowly withdrawing from the A unit. Place fader track on desk or working surface with black contacts facing upwards. If necessary, the track can be washed in warm water, wiped gently then dried thor- oughly using a dry cloth. Use a lint free cloth or swab to wipe the tracks and check for marks along the track. (Note: Lint free cloth should be used to avoid B dust/fib

Inhaltszusammenfassung zur Seite Nr. 5

FADER CLEANING AND REPLACEMENT DESCRIPTION OF FUNCTIONS After constant use the SMX-401 faders may need to be cleaned and 1. Microphone 1 input - This combo (1/4”/XLR) connector is used to lubricated from time to time. This will ensure long life and keep a connect a microphone. The volume is controlled by the MIC 1 knob. smooth feeling throughout the fader's lifetime. Follow the instructions 2. Microphone 2 input - This 1/4” connector is used to connect a below to lubricate and clean your faders:

Inhaltszusammenfassung zur Seite Nr. 6

DESCRIPTION OF FUNCTIONS DESCRIPTION OF FUNCTIONS 18. Master output level - Controls the overall output level of the mixer. 19. Output meters - These LEDs let you know if the audio coming out of the mixer is loud enough (or too loud!). If the LEDs reach the red, the mixer is probably clipping, or distorting. 20. Input selectors - These toggle switches select the input source between phono and line for each channel. 21. Input gains - Controls the input sensitivity level of each channel. An LED