Bedienungsanleitung Stanton SA-12

Inhaltszusammenfassung zur Seite Nr. 1

ROTATING AND REPLACING THE OS2
ROTATING INSTRUCTIONS REPLACING INSTRUCTIONS
1 . Remove the face plate. 1. Remove the the face plate.
2. Remove the 2 outer screws from the 2. Remove the 2 outer screws from the SA-12
round OS2 plate (removing the 2 inner round plate (removing the 2 inner
DJ CRAZE SIGNATURE MIXER
screws will detach the fader from the screws will detach the fader from the
plate) plate)
3. Rotate the plate to the desired posi- 3. Remove the OS2 assembly and dis -
tion and tighten th

Inhaltszusammenfassung zur Seite Nr. 2

TECHNICAL SPECIFICATIONS Line inputs: 2 (RCA), -10dBV @ <10Kohm Thank you for making Stanton your first choice in professional DJ mixers. Phono inputs: 2 (RCA), -50dBV @ <10Kohm This innovative family of mixers has been developed with input from the DJ mic input: 1 (1/4 inch), 2.45 mV / 3K ohm professional DJ community, bringing to the marketplace a previously Master output: 2 (1/4” TRS Balanced/RCA unbalanced), unavailable, affordable combination of user-friendly, functional design, Balanced

Inhaltszusammenfassung zur Seite Nr. 3

FADER CLEANING AND REPLACEMENT SA-12 FUNCTIONS & FEATURES It’s only the 3x champion, DJ Craze signature mixer! This battle mixer has the all remove the slider assembly (C), ensuring that the wiper contacts (D) are the quality of a club mixer and meets all the requirements of today's Turntablist. not damaged as this will affect the operation of the fader. Clean the slid - After years in the making the ultimate Scratch DJ mixer is here and ready for bat- er assembly by gently wiping the wiper cont

Inhaltszusammenfassung zur Seite Nr. 4

FADER CLEANING AND REPLACEMENT DESCRIPTION OF FUNCTIONS After constant scratch use the SA-12 faders may need to be cleaned and lubri - cated from time to time. This will ensure long life and keep a smooth feeling throughout the fader's lifetime. Follow the instructions below to lubricate and clean your faders: Removing a fader: 1. Make sure mixer is powered off and power supply is disconnected from back of mixer. 2. To remove the lower faceplate, take off the 3 fader knobs and then remove the 4

Inhaltszusammenfassung zur Seite Nr. 5

FOCUS FADER V2 TOP PANEL Improving on the original and world's first optical fader design that brought the industry and art to a new plateau, the Focus Fader V2 is truly curve adjustable to 1. Mic/Line 3 level control: Controls 9. Channel fader: Controls the chan- accommodate to any style of DJ artist. Created to meet the requirements of the output level of the microphone/ nel output level. Line channel. today’s higher standards , if your style requires a smooth fade for long mixes or a 10. Cro

Inhaltszusammenfassung zur Seite Nr. 6

DESCRIPTION OF FUNCTIONS PostScript Picture MOD-1_callouts.eps MOD1 - REMOVABLE EFFECTS MODULE lock will keep it there even if the OS2 is mixed for easy control (and cool moved. effect). The Pitch shifter only has one 18. Effects: Used to select an effect. parameter. Effects included on the MOD1are 20. Mix: Controls the dry/wet signal(dry Echo, Flanger, and Pitch Shifter. = original signal, wet = processed sig- nal). In the center position, the signal 19. Parameter: Controls the effect includes