Inhaltszusammenfassung zur Seite Nr. 1
TABLE OF CONTENTS
FLOW CHART...........................................................................................1
CONTROLS & FUNCTIONS.......................................................................2
REAR CONTROLS.........................................................................................4
DMX-512 ADDRESSING..............................................................................4
PROGRAMMING SCENES..................................................................
Inhaltszusammenfassung zur Seite Nr. 2
FLOW CHART This is the order you program the DMX Operator. ADDRESS FIXTURES pg 4 to 7 PROGRAM SCENES (up to 240) pg 8 & 9 PLAYBACK SCENES PROGRAM CHASES 8 AT A TIME up to 6 of 240 scenes 30 BANKS OF 8 pg 12 pg 14 PLAYBACK CHASES up to 240 pg 14 Elation Professional® - DMX OPERATOR User Manual page 1 5 1 3 4 2 SCENES SCANNERS 1 7 Chase 1 BANK 1 2 3 4 5 6 7 8 2 Chase 2 8 Page A Program 1 2 3 4 5 6
Inhaltszusammenfassung zur Seite Nr. 3
CONTROLS & FUNCTIONS REAR CONTROLS 16. MIDI IN- Receives MIDI data. 1. SCANNER BUTTONS - Used to Select any or all of 12 fixtures This 17. DMX POLARITY SELECT- Changes the polarity setting of the DMX is what selects which DMX channels go to output. the fixtures. 18. DMX OUT- Used to send DMX signal to fixtures or Packs. Scanner 1 controls Channel 1 to 16 19. DC INPUT- Accepts a DC 9~12V, 300 mA minim
Inhaltszusammenfassung zur Seite Nr. 4
Some units start receiving one more than the ADDRESS selected. Example: Elation Patend Light, Elation Professional Mighty Scan Most fixtures start receiving on the address selected EXAMPLE: Setting ADDRESS at 0 unit starts at CHANNEL 1 all Dip switches OFF EXAMPLE: Setting ADDRESS for Setting ADDRESS for Setting ADDRESS at 1 unit starts at CHANNEL 1 17 49 Dip switch # 1 on Setting ADDRESS for Setti
Inhaltszusammenfassung zur Seite Nr. 5
While DMX 512 is the standard used to control lighting, at this time, PROGRAMMING SCENES there are some differences you should know about. One is pin con- 1. PRESS AND HOLD PROGRAM BUTTON (FIG. 6) for three (3) seconds figuration. The DATA + And DATA- are reversed. This can be corrected to activate program mode. The LCD DISPLAY (FIG.3) will indicate by using the reversal switch on the DMX Operator. If you have some your in program mode by displaying a continuous fast blinking fixt
Inhaltszusammenfassung zur Seite Nr. 6
Programming Scenes continued PROGRAMMING SCENES REVIEW SCENE COPY: To review this is how you would create a simple 4 step box pattern This function allows you to copy the settings of one scene to another. 1. Press and hold PROGRAM BUTTON (FIG. 6) for three (3) seconds 1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to 2. Select a fixture(s) to program using the SCANNER BUTTONS 1 TO 12 activate program mode. The LCD DISPLAY (FIG.3) will indicate NOTE: WHEN YOU ARE BEGINNING IT
Inhaltszusammenfassung zur Seite Nr. 7
RESET ALL SCENES Continued: PROGRAMMING CHASES: 3. Disconnect the power and release the buttons. NOTE: YOU MUST PROGRAM SCENES BEFORE YOU CAN PROGRAM CHASES. 4. Reconnect the power, all scenes should be erased 1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to COPY BANK OF SCENES: activate program mode. The LCD DISPLAY (FIG.3) will indicate program mode by displaying a continuous fast blinking dot next This function will copy the settings of one bank to another. to ‘PROG.’
Inhaltszusammenfassung zur Seite Nr. 8
PLAYBACK SCENES & CHASES DELETE A STEP: MANUAL RUN SCENES: 1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to activate program mode. The LCD DISPLAY (FIG.3) will indicate 1. When power is first turned on, the unit is in manual scene mode. program mode by displaying a continuous flashing light next to 2. Make sure AUTO & MUSIC LED’S BUTTONS (FIGS. 8 AND 9) are off . ‘PROG.’ 3. Select BANK (FIG.4), using the UP and DOWN BANK BUTTONS 2. Select the CHASE 1 TO 6 (FIG. 5) th
Inhaltszusammenfassung zur Seite Nr. 9
AUTO RUN CHASES: MIDI OPERATION 1. Select your desired chase by pressing any or all of the six CHASE BUTTONS (FIG.5). To Activate MIDI operation: 2. Press and release the AUTO/DEL BUTTON (FIG.8). 1. Press and hold down the MIDI/REC BUTTON (FIG.7) for three 3. The corresponding LED will flash in the LCD DISPLAY (FIG.3) seconds, the last two digits of the LCD DISPLAY (FIG.3) will BLINK to indicating Auto mode is engaged. indicate MIDI setting. 4. Adjust the SPEED (FIG.13) and FADE (FI
Inhaltszusammenfassung zur Seite Nr. 10
Specifications TROUBLE SHOOTING All Scenes,Chases, and Options retained by battery back up 3 space 19” rack mount case Mirrors don’t respond when I move faders Reversible DMX polarity out put Make sure address is correct. See Chart pages 20, 21 MIDI input to control Chase and scene s Make sure speed is adjusted, if available, for faster 192 DMX Channels output 12 Scanners buttons (up to 16 Channels each) movement.Not all Fixtures have a speed adjustment. 6 Chases of 240 steps If total of XL
Inhaltszusammenfassung zur Seite Nr. 11
DIP SWITCH DMX ADDRESS CHART DIP SWITCH DMX ADDRESS CHART WHEN STARTING ADDRESS IS ONE MORE THAN WHEN STARTING ADDRESS IS THE ONE SELECTED SELECTED IE: AMERICAN DJ MIGHTY SCAN & MAX Scanner 7 Channel 97 Scanner 7 Channel 97 Scanner 1 Channel 1 Scanner 1 Channel 1 ON ON ON ON 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 Scanner 8 Channel 113 Scanner 8 Channel 113 Scanner 2 Channel 17 Scanner 2 Channel 17 ON ON ON ON 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9
Inhaltszusammenfassung zur Seite Nr. 12
CUSTOMER SUPPORT 2-YEAR LIMITED WARRANTY A. Elation Professional® hereby warrants, to the original purchaser, Elation Professional® Elation Professional® provides a customer support line, to provide set up products to be free of manufacturing defects in material and workmanship for a period of 2 help and to answer any question should you encounter problems during Years (730 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United Stat
