Inhaltszusammenfassung zur Seite Nr. 1
Register your product and get support at
www.philips.com/welcome
BDP3000
EN User manual
Inhaltszusammenfassung zur Seite Nr. 2
Norge Important notes for users in U.K. Typeskilt fi nnes på apparatens underside. Mains plug Observer: Nettbryteren er sekundert innkoplet. This apparatus is fitted with an approved moulded Den innebygde netdelen er derfor ikke plug. Should it become necessary to replace the frakoplet nettet så lenge apparatet er tilsluttet main fuse, this must be replaced with a fuse of nettkontakten. same value as indicated on the plug (example 10A). 1. Remove fuse cover and fuse. For å redusere faren f
Inhaltszusammenfassung zur Seite Nr. 3
Contents ČESKA REPUBLIKA Výstraha! Tento přístroj pracuje s laserovým 1 Important 4 paprskem. Při nesprávné manipulaci s přístrojem Safety and important notice 4 (v rozporu s tímto návodem) můże dojít k nebezpečnému ozáření. Proto přístroj za chodu 2 Your product 5 neotevírejte ani nesnímejte jeho kryty. Jakoukoli Feature highlights 5 opravu vždy svěřte specializovanému servisu. Product overview 6 Nebezpečí! Při sejmutí krytů a odjištění 3 Connect 8 bezpečnostních spínačů hrozí nebezpečí
Inhaltszusammenfassung zur Seite Nr. 4
Copyright notice 1 Important This product incorporates copyright Safety and important notice protection technology that is protected by method claims of certain U.S. Warning patents and other intellectual property rights owned by Macrovision Corporation and other • Risk of overheating! Never install the product in a confined rights owners. Use of this copyright protection space. Always leave a space of at least 4 inches around the product for ventilation. Ensure curtains or other obje
Inhaltszusammenfassung zur Seite Nr. 5
BD-Live Java and all other Java trademarks and logos Connect this product to the movie studios website are trademarks or registered trademarks of via the LAN port to access a variety of up-to-date Sun Microsystems, Inc. in the United States content (e.g. refreshed previews and exclusive and/or other countries. special features). You can also enjoy next generation BONUSVIEW™ possibilities, such as ringtone/wallpaper downloads, ‘BD LIVE’ and ‘BONUSVIEW’ are peer-to-peer interactions,
Inhaltszusammenfassung zur Seite Nr. 6
Product overview Main unit a Front panel Description • Turn on this product or switch to display standby mode. LOADING Loading a disc. b Disc compartment UNSUPP The disc is not supported. c BD Blu-ray disc is recognized. • Open or close the disc compartment. HDMI ERR The HDMI video resolution is d IR sensor not supported by TV. • Point the remote control at the IR sensor. FASTFWD Fast forward mode. e Display panel FASTBWD Fast reverse mode. f SLOWFWD Slow forward mode. • Start or resume
Inhaltszusammenfassung zur Seite Nr. 7
c TOP MENU Remote control • BD: Display the top menu. • DVD: Display the title menu. d • Access the home menu. e DISC MENU / POP-UP MENU • BD: Access or exit the pop-up menu. • DVD: Access or exit the disc menu. f OK • Confirm an entry or selection. g • Navigate through the menus. h BACK • Return to a previous display menu. i / • Skip to the previous or next title, chapter, or track. j / • Search backward or forward. k • Mute volume (applicable only to certain Philips brand TVs). l +/
Inhaltszusammenfassung zur Seite Nr. 8
v OPTIONS Note • Access options for the current activity or selection. • You must connect this product directly to a TV. w Color buttons • BD: Select tasks or options. Option 1: Connect to the HDMI jack x HDMI • Select the video resolution of HDMI output. y REPEAT • Select repeat play or random play. 3 Connect Make the following connections to use this product. Basic connections: HDMI IN • Video • Audio • Power 1 Connect an HDMI cable (not supplied) to Optional connections: • the HDMI jack
Inhaltszusammenfassung zur Seite Nr. 9
Option 2: Connect to the component Option 3: Connect to the composite video jack video jack Y Pb Pr AUDIO IN VIDEO IN AUDIO IN 1 Connect a composite video cable to: • the VIDEO jack on this product. • the VIDEO input jack on the TV. 1 Connect the component video cables (not 2 Connect the audio cables to: supplied) to: • the AUDIO L/R-AV OUTPUT jacks on • the Y Pb Pr jacks on this product. this product. • the COMPONENT VIDEO input jacks • the AUDIO input jacks on the TV. on the TV. 2 Co
Inhaltszusammenfassung zur Seite Nr. 10
1 Connect a coaxial cable (not supplied) to: Connect USB device • the COAXIAL jack on this product. A USB device provides an additional memory to • the COAXIAL/DIGITAL input jack on enjoy software updates and BD-Live bonus content. the device. Connect analogue stereo system AUDIO IN 1 Connect the USB device to the USB jack on this product. Note • This product cannot play any audio/video/photo file 1 Connect the audio cables to: stored on a USB device. • the AUDIO L/R-AV OUTPUT jacks o
Inhaltszusammenfassung zur Seite Nr. 11
Prepare the remote control Navigate the menu 1 When a menu is displayed, press the buttons Caution on the remote control to navigate. • Risk of explosion! Keep batteries away from heat, Button Action sunshine or fire. Never discard batteries in fire. Move up or down. 1 Press and push the battery compartment to Move left or right. slide it open (see “1” in the illustration). OK Confirm a selection. 2 Insert two AAA batteries with correct Enter numbers. polarity (+/-) as indicated. 3 Push and
Inhaltszusammenfassung zur Seite Nr. 12
One-touch play Setup network 1 Press the STANDBY button to turn on this To enjoy software updates of this product and BD- product. Live bonus contents for certain Blu-ray discs, set up » The TV (if the TV supports one-touch play) the network connection. automatically turns on and switches to the correct video-in channel. Note » If a disc is loaded in this product, disc play • Ensure that the network cable is properly connected and automatically starts. the router is switched on. One-touch
Inhaltszusammenfassung zur Seite Nr. 13
Disc content structure Change video play The structure of a disc content is generally divided 1 Play a title. as shown below. 2 Use the remote control to change the play. BD-video, DVD-video Button Action title 1 title 2 AUDIO Select an audio language or chapter 1 chapter 2 chapter 1 chapter 2chapter 3 channel on a disc. Audio CD SUBTITLE Select the subtitle language on track 1 track 2 track 3 track 4track 5 a disc. MP3, Windows Media™ Audio, JPEG REPEAT Select or turn off repeat or shuffle m
Inhaltszusammenfassung zur Seite Nr. 14
VCD/SVCD/DivX disc: Note • DISC MENU display the content of the disc. • The marked section for repeat play is only possible Tip within a track/title. • If the PBC setting is off, the VCD/SVCD skips the menu and starts play from the first title. To display the View video play from different camera menu before play, turn on the PBC setting (see “Adjust settings” > [Preference Setup] > [VCD PBC]). angles 1 During play, press OPTIONS. » The play options menu is displayed. Select title/chapter
Inhaltszusammenfassung zur Seite Nr. 15
3 Play automatically starts, or select a play Play DivX® video option in the menu and press OK. DivX video is a digital media format that retains high • During play, you can press TOP MENU quality despite a high rate of compression. You can to display additional information, features enjoy DivX video on this DivX certified product. or content stored in the disc. 1 Insert a disc that contains the DivX videos. • During play, you can press POP-UP 2 Press , select [Play Disc], then press OK. M
Inhaltszusammenfassung zur Seite Nr. 16
Play MP3/WMA music Control photo play MP3/WMA is a type of highly compressed audio file 1 Play a photo slideshow. (files with .mp3, .wma extensions). 2 Use the remote control to control the play. 1 Insert a disc that contains the MP3/WMA music. Button Action 2 Press , select [Play Disc], then press OK. Rotate a photo anti-clockwise/ / » A contents menu is displayed. clockwise. 3 Select a music folder, then press OK. Flip a photo horizontally/vertically. / 4 Select a file to play, then press OK
Inhaltszusammenfassung zur Seite Nr. 17
6 Adjust settings Note • If the setup option is grayed out, it means the setting cannot be changed at the current state. Video setup • [4:3 Letterbox] – For 4:3 screen TV: wide- 1 Press . screen display with black bars on the top and bottom of the screen. 2 Select [Settings], then press OK. • [4:3 Panscan] – For 4:3 screen TV: full-height 3 Select [Video Setup], then press . display with the trimmed sides. • [16:9 Widescreen] – For wide-screen TV: display ratio 16:9. • [16:9] – For 16:9 s
Inhaltszusammenfassung zur Seite Nr. 18
• [Auto] - Enjoy vivid images in over a billion [Night Mode] colors on Deep Color enabled TV. Make a loud sound level softer and a soft sound • [Off] - Output standard 8 bit color. level louder to play the disc at a low volume, without disturbing other persons. [Component Video] • [Auto] - Applicable to tracks with Dolby True Select a component video output resolution that is HD audio. compatible with the TV display capability. • [On] – For quiet viewing at night. • [480i/576i], [480p/576p],
Inhaltszusammenfassung zur Seite Nr. 19
Preference Setup 1) Press the Numeric buttons to enter the password or your last set password. If you forget 1 Press . the password, enter ‘0000’, then press OK. 2 Select [Settings], then press OK. 2) Enter the new password. 3 Select [Preference Setup], then press . 3) Enter the same password again. 4) Move to [Confirm] in the menu and press OK. [Display Panel] Select a brightness level of the front panel display. • [Normal] - Normal brightness. • [Dim] - To dim display. [Auto Standby] Turn on
Inhaltszusammenfassung zur Seite Nr. 20
• [On] - Turn on EasyLink features. • [Off]- Internet access is permitted for all BD- • [Off] - Disable EasyLink features. Live contents. [One Touch Play] [Network] When you press the STANDBY button to turn Set up a connection to internet to download on this product, the TV (if the TV supports one- updated software and access BD-Live bonus touch play) automatically turns on and switches to contents. It guides you through a step-by-step the video-in channel. Disc play starts if there is a netw
