Bedienungsanleitung Stanton SMX.202

Inhaltszusammenfassung zur Seite Nr. 1

Inhaltszusammenfassung zur Seite Nr. 2

IMPORTANT SAFETY PRECAUTIONS 1. Read Instructions – All the safety and operating instructions should be read before 14. Servicing – The user should not attempt any service to the appliance beyond that operating this product. described in the operating instructions. All other servicing should be referred to 2. Retain Instructions – The safety and operating instructions should be retained for qualified service personnel. future reference. 15. Ventilation – The cabinet contains slots and opening

Inhaltszusammenfassung zur Seite Nr. 3

INTRODUCTION Thank you for purchasing Stanton’s newest innovation in professional tabletop mixer. The SMX.202 mixer was designed to bring style and reliability to the mobile or club DJ at an affordable cost. MAIN FEATURES Compact design User replaceable crossfader 2 phono, 2 line, 1 microphone input Gain, Hi and Low Controls on Channels Powerful stereo headphone output Cue Pan Selector (Ch.1-Ch.2) Bright LED Output Indicators ACCESSORIES Checking Package Contents Check tha

Inhaltszusammenfassung zur Seite Nr. 4

CONTROL OVERVIEW AC 9V 2

Inhaltszusammenfassung zur Seite Nr. 5

CONTROL OVERVIEW 1. Channel Gain - Adjusts the pre-fader volume for cleaner sound. 11. Headphone Level - Adjusts cue volume. 2. Mic Input Gain - Adjusts microphone input level. 12. Master Level - Controls the overall output level. 3. Mic EQ - The mic channel includes a two-band EQ with a 13. Power Switch - Turns unit off and on. range of +10dB to -10 dB. 14. Power Connector - Plug in the included power supply 4. Channel EQ - Adjusts the high, mid and low frequency here. levels of the input

Inhaltszusammenfassung zur Seite Nr. 6

QUICK SETUP DIAGRAM Review this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC power. Now you are ready to switch everything on. IMPORTANT: Always switch on your audio input sources, such as turntables or CD players first, then your mi

Inhaltszusammenfassung zur Seite Nr. 7

SPECIFICATIONS Input / output impedance & sensitivity: Line 47k ohm /-14 dB +/-3 dB Phono 47k ohm /-50 dB +/-3 dB Mic 6k ohm /-54 dB +/-3 dB Master (Rec) 47k ohm /0 dB +/-3 dB Phones (load=32 ohm) 33 ohm / -3 dB +/-3 dB Max. output (THD= 5%, load= 47k) Master (RCA) More than 18 dB (8.0V) Phones More than 5 dB (1.8V) at load=32 ohm Channel balance: Within 3 dB Frequency response: Line 20-20 kHz +/- 3 dB Phono 20-20 kHz +2/-3 dB (RIAA) Mic 50-20 kHz +2/-3 dB S/N ratio:

Inhaltszusammenfassung zur Seite Nr. 8

WARRANTY & RETURN POLICY Warranty Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one year following the date of original purchase. Exceptions to this warranty are as noted below: The warranty