Inhaltszusammenfassung zur Seite Nr. 1
PARTS AND OPERATION MANUAL
PLASTER/ MORTAR MIXERS
WM-700S
WM-700P
Revision #7 (06/26/01)
. .
MULTIQUIP INC.. . PARTS DEPARTMENT:
18910 WILMINGTON AVE. 800-427-1244
CARSON, CALIFORNIA 90746 FAX: 800-672-7877
310-537-3700 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE:
800-421-1244 800-478-1244
FAX: 310-537-3927 FAX: 310-631-5032
E-mail:mq@multiquip.com � www:multiquip.com
Atlanta • Boise Dallas Houston Newark
Montreal, Canada Manchester, UK
Rio De Janiero, Brazil Guadalajara, Mexi
Inhaltszusammenfassung zur Seite Nr. 2
PAGE 2 — WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Inhaltszusammenfassung zur Seite Nr. 3
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE 800-478-1244 or 310-537-3700 FAX: 310- 537-4259 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 MAIN 800-421-1244 or 310-537-3700 FAX: 310-537-3927 WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/26/01) — PAGE 3
Inhaltszusammenfassung zur Seite Nr. 4
TABLE OF CONTENTS Here's how To Get Help .......................................... 3 Table Of Contents ................................................... 4 Parts Ordering Procedures ..................................... 5 Rules for Safe Operation & Safety Decals .............. 6 Warranty .................................................................. 7 WHITEMAN — 700S & 700P Operations ......................................................... 8-10 Specifications ............................
Inhaltszusammenfassung zur Seite Nr. 5
PARTS ORDERING PROCEDURES n Dealer account number n Dealer name and address n Shipping address (if different than billing address) n Return fax number n Applicable model number n Quantity, part number and description of each part n Specify preferred method of shipment: UPS Ground UPS Second Day or Third Day* UPS Next Day* Federal Express Priority One (please provide us with your Federal Express account number)* Airborne Express* Truck or parcel post *Normally shipped the same day the
Inhaltszusammenfassung zur Seite Nr. 6
RULES FOR SAFE OPERATION & SAFETY DECALS Do not operate or service this equipment When towing, an adequate safety chain before reading the operating and maintenance must be fastened to the frame, refer to page 9. instructions manual or serious injury may Keep all inexperienced and unauthorized result. people away from the equipment at all times. Do not operate this equipment unless all Unauthorized equipment modifications will guards and safety devices are attached and void all warran
Inhaltszusammenfassung zur Seite Nr. 7
WARRANTY There are no warranties, express or implied, made by Multiquip There are no warranties, express or implied, in addition to the Inc. hereunder on Products manufactured or distributed by it above except as may be provided in writing by Multiquip Inc. except the warranty against defects in material and workmanship MULTIQUIP INC. SHALL NOT BE LIABLE FOR ANY SPECIAL, on new Products to the original purchaser, as hereinafter set INDIRECT OR CONSEQUENTIAL DAMAGES. forth. THE FOREGOING WARRANTI
Inhaltszusammenfassung zur Seite Nr. 8
WM-700S, 700P — OPERATIONS Refer to the following chart. For recommend plug sizes. 115 VOLT 1Ø 230 VOLT 1Ø MOTOR WM 700 WM 900 PIGTAIL CAP CONN BODY PIGTAIL CAP CONN BODY HORSE NEMA/ NEMA/ NEMA/ NEMA/ POWER WHITEMAN WHITEMAN WHITEMAN WHITEMAN 1½ & 3 HPL6 5-30P/940545L0 5-30R/94054L1 6-15P/94055 L6-15R/94055 CONTROLS KILL SWITCH: (Gasoline Engine Only) Located on the side of GENERAL the engine cover. The Whiteman WM-700 and WM-900 Series plaster and mortar ENGINE THROTTLE AND CHOKE CONTROLS: Plea
Inhaltszusammenfassung zur Seite Nr. 9
WM-700S, 700P — OPERATIONS BEARING BRACKET NOTE: It is critical that the length of chain be properly adjusted to prevent the Draw Bar and front mixer stand from Grease the bearing bracket every month. dropping to the ground (contact) in the event the Draw Bar becomes disconnected from the towing vehicle. COUNTERSHAFT STEP 1 The countershaft rotates on two self-aligned pillow block bearings. Grease these every 40 hours using grade #1 Lithium Base grease. DRAW BAR GEAR ALIGNMENT The countershaft a
Inhaltszusammenfassung zur Seite Nr. 10
WM-700S, 700P — OPERATIONS DANGER BEFORE TOWING The following is the recommended wiper blade adjustments: 1) STEEL DRUM MIXERS SIDE SCRAPER BALL HITCH COUPLER 1. Check vehicle hitch, ball, and coupler for signs of wear or damage. Replace any parts that are worn or damaged before towing. 2. Use only the 2" ball diameter as indicated on your coupler. Use of any other ball diameter will create an extremely dangerous condition which can result in separation of the coupler and ball or ball failure. 3
Inhaltszusammenfassung zur Seite Nr. 11
WM-700S, 700P — SPECIFICATIONS WM-700S SPECIFICATIONS MODEL U.S.(inch) METRIC CAPACITY ....................................................7 CUBIC FEET ....................................................... 198 LITERS BAG CAPACITY .............................................1½ - 2½ ............................................................ 1½ - 2½ WEIGHT (appROX.) .......................................788 LBS. ............................................................. 357 KG. L X W X H .
Inhaltszusammenfassung zur Seite Nr. 12
EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Section 1: Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant. Section 2: Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a ser
Inhaltszusammenfassung zur Seite Nr. 13
WM-700S, 700P — SUGGESTED SPARE PARTS WM-700S/P WM-700S/P 1 to 3 Units 5+ Units Qty. P/N Description Qty. P/N Description 3 ......... EM505834 ........... V-BELT 5 ......... EM505834 ........... V-BELT 3 ......... EM507846 ........... V-BELT, WM-700 ELECTRIC MOTOR 5 ......... EM507846 ........... V-BELT, w/ELECTRIC MOTOR 6 ......... 491010 ................ LATCH ASSY 10 ....... 491010 ................ LATCH ASSY 3 ......... EM203010 ........... BLADE KIT STEEL DRUM 5 ......... EM203010 .........
Inhaltszusammenfassung zur Seite Nr. 14
WM-700S, 700P — DRUM HEAD AND PADDLE SHAFT ASSY DRUM HEAD TOW END 27 26 28 25 PADDLE SHAFT ASSEMBLY PAGE 14 — WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Inhaltszusammenfassung zur Seite Nr. 15
WM-700S, 700P — DRUM HEAD AND PADDLE SHAFT ASSY DRUM HEAD & PADDLE SHAFT ASSEMBLY DRUM HEAD NO. PART NO. PART NAME QTY. REMARKS 2 EM200297 U-BOLT 2 EM968011 NUT HEX ½-13 4 3 EM200292 U-BOLT INSERT 4 4 3249 DUST CAP ............................................................................... 1 ................. REPLACES 50017 5 EM902153 BEARING 2 6 EM507720 BRACKET, DUMP BEARING ................................................... 2 ................. STARTING S/N 750180 6 500076 BRACKET, DUMP B
Inhaltszusammenfassung zur Seite Nr. 16
WM-700S — STEEL DRUM STEEL DRUM 109 110 111 108 PAGE 16 — WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Inhaltszusammenfassung zur Seite Nr. 17
WM-700S — STEEL DRUM WM-700S - STEEL DRUM NO. PART NO. PART NAME QTY. REMARKS 100 EM201537 DUMP HANDLE 1 * 101 ELC1 TOWING TONGUE (P. EYE) .................................... 1 .............. NO LONGER AVAILABLE 101 EPC1 TOWING TONGUE (PIN HOLE) .............................. 1 .............. CONTACT MQ SALES DEPT./ACCESSORY ITEM 101 EBC1 TOWING TONGUE (BALL HITCH) .......................... 1 .............. CONTACT MQ SALES DEPT./ACCESSORY ITEM 102 EM963580 CAP SCREW ..........................
Inhaltszusammenfassung zur Seite Nr. 18
WM-700P — POLYETHYLENE DRUM POLYETHYLENE DRUM 121 122 123 124 125 116 126 123 124 PAGE 18 — WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Inhaltszusammenfassung zur Seite Nr. 19
WM-700P — POLYETHYLENE DRUM POLYETHYLENE DRUM MODEL WM-700P NO. PART NO. PART NAME QTY. REMARKS 115 13000 PLASTIC DRUM (W/O GRATES) ............................................. 1 ...................... REPLACES 504522 * 116 507495 SUPPORT DRUM 1 117 504534 STATIONARY GRATE 1 * 118 504535 MOVEABLE GRATE 1 * 119 507493 GRATE OPEN BAR 1 * 120 500083 DUMP HANDLE 1 * 508022 DRUM & SHAFT ASSY (COMPLETE) (POLY) ........................ 1 ...................... INCLS ITEMS w/ AND DRUM * HEAD & PADDLE
Inhaltszusammenfassung zur Seite Nr. 20
WM-700S, 700P — GAS ENGINES, PULLEYS & CAB ASSEMBLY CAB ASSEMBLY PAGE 20 — WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
