Bedienungsanleitung Olympus LS-10

Inhaltszusammenfassung zur Seite Nr. 1

Linear PCM Recorder
http://www.olympus.com
How to Capture
Live Sound

Inhaltszusammenfassung zur Seite Nr. 2

Features of the LS-10 Recording in various scenes Scene 1: Recording music Scene 2: Recording sounds of nature Scene 3: Recording a conference Setups of musical Instruments Actual applications Application 1: Digitizing an analog source Application 2: Excellent playback functions Application 3: Playback, editing on your PC Application 4: CD creation on your PC Experience the world of unlimited Accessories live sound recording with the LS-10 Specifications Fully compliant with the linear PCM form

Inhaltszusammenfassung zur Seite Nr. 3

Features of the LS-10 High-quality linear PCM recording capability High-sensitivity built-in microphones for high-quality recording Multi-format compatibility Newly developed to accurately capture any Supported recording formats include the MP3 and WMA formats that are widely used in Internet file Microphone Case type of sound, the LS-10's high-sensitivity distributions and are suitable for long-term recording, as well as the linear PCM (WAV) format. Select the microphones are accommodated in

Inhaltszusammenfassung zur Seite Nr. 4

Recording in Recording music various scenes | LS-10 recording position Place the LS-10 in front of the musical instruments or the stage. The microphones have directivity so they should be installed in front of the performer or stage, with the LCD panel facing up. If the microphones are titled or placed upside down, the sound source cannot be recorded with correct positioning and the phase may be inverted. For details on the positioning, see pages 10 and 11 of this guide. Install the LS-10

Inhaltszusammenfassung zur Seite Nr. 5

Recording in Sound of nature / Conference various scenes Scene 2 Scene 3 Recording sounds of nature Recording a conference The following settings are recommended for outdoor recording of sounds of nature such The following settings are recommended for recording people speaking at a conference, as bird songs, the murmuring of a stream, or even the sound of a steam locomotive. forum, lecture, etc. | | Rec Mode setup Rec Mode setup WAV (44.1 kHz/16-bit) Approx. 3 hr. 10 min. When recording bird so

Inhaltszusammenfassung zur Seite Nr. 6

Setups of musical instruments Tips for recording individual musical instruments or musical performances | | Vocals Piano With a grand piano, point the LS-10 towards the center of the Place the LS-10 some distance in front of the singer(s). If breath soundboard located inside the opening of the piano. To noise is noticeable, set the LOW CUT switch to ON or attach the include the sounds in the environment where the piano is provided windscreen to the LS-10. Adjust the angle of the unit

Inhaltszusammenfassung zur Seite Nr. 7

Actual applications Application 1 Application 3 Digitizing an analog source Playback, editing on your PC The LS-10 can be used to digitize analog sound sources such as LP records and music cassettes. Connect The LS-10 comes with CUBASE LE4 software, a multifunction DAW (Desktop the LINE OUT jacks of the analog component (amplifier, radio-cassette, etc.) to the LINE IN jacks of the Audio Workstation) application that enables you to edit and play back audio LS-10. A converter cable (commercially

Inhaltszusammenfassung zur Seite Nr. 8

Accessories Specifications Expand the joy of recording Main specifications Recording format Linear PCM (Pulse Code Modulation) (WAV) / MP3 (MPEG-1/MPEG-2 Audio Layer 3) / WMA (Windows Media® Audio) Maximum headphone output 3 mW + 3 mW (at load of 16Ω) Recording media Built-in NAND ash memory (2 GB), SD/SDHC Card (8 GB maximum) (optional) Speaker Built-in 16 mm dia. round dynamic speaker x 2 (stereo) MIC jack 3.5 mm dia. mini-jack, impedance 2 kΩ LINE IN jack 3.5 mm dia. mini-jack, impedance ap