Inhaltszusammenfassung zur Seite Nr. 1
Job # Mi4014 manual cover
Revised 072208
Colors: 1-color print
with REFRESH Style
Pantone 300c
iWakeUp
TM
User Guide
Please read these instructions
completely, before operating this product.
Guía del usario
Por favor lea toda las instruciones
antes de tratar de usar este producto.
Imation Electronic Products, Imation Electronic Products,
A Division of Imation Enterprises Corp., A Division of Imation Enterprises Corp.,
Weston, Florida. Printed in China Weston, Florida. Impreso en China
www
Inhaltszusammenfassung zur Seite Nr. 2
SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock t
Inhaltszusammenfassung zur Seite Nr. 3
SAFETY PRECAUTIONS INFORMATION: This equipment complies with Class B digital device regulations. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turn
Inhaltszusammenfassung zur Seite Nr. 4
S E I R T A S S U S D O N I C Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
Inhaltszusammenfassung zur Seite Nr. 5
LOCATION OF CONTROLS FRONT 10 1 11 12 13 14 15 2 SNOOZE 16 3 17 4 18 5 19 6 7 8 20 9 1. Left Speaker 12. Volume Down Button 2. SNOOZE/SLEEP Button 13. Volume Up Button 3. Power Button 14. Remote Sensor 4. MODE Button (AM/FM) 15. HOUR Button 5. PRESET/SET Button 16. MIN (Minute) Button 6. EQ Button 17. ALARM 2 Button 7. Tune/Skip/Search o 18. ALARM 1 Button Button 19. TIME SET/Display Button 8. PLAY/PAUSE (®p) Button 20. LCD Display 9. Tune/Skip/Search n Button 10. Right Speaker 11. iPod Compartm
Inhaltszusammenfassung zur Seite Nr. 6
LOCATION OF CONTROLS (CONTINUED) REAR 4 1 2 5 3 6 7 1. DIMMER Switch (OFF/L/M/H) 2. DC 12V Jack (AC ADAPTER PART NO. 0251-207200-10103*) 3. LINE IN Jack 4. DST (Daylight Savings Time) Switch (-1/+1) 5. Headphones Jack 6. FM Wire Antenna 7. Battery Compartment (Bottom of Unit) (BATTERY COVER PART NO. 3051-002206-10000*) *Consumer Replaceable Part (See page 20 to order.) 5
Inhaltszusammenfassung zur Seite Nr. 7
LOCATION OF CONTROLS (CONTINUED) REMOTE 1 7 2 3 4 8 5 9 6 10 11 1. Power Button 6. EQ Button 2. Volume Up Button 7. MODE Button 3. PLAY/PAUSE (®p) Button 8. Tune/Skip/Search n 4. Tune/Skip/Search o Button Button 9. Volume Down Button 5. Battery Compartment 10. PRESET/SET Button (Side of Unit) 11. Strap Hole (Bottom of Unit) REMOTE CONTROL PART NO. RC-F00022001* *Consumer Replaceable Part (See page 20 to order.) NOTE: • The remote buttons function in the same way as the buttons on the main unit.
Inhaltszusammenfassung zur Seite Nr. 8
POWER SOURCE AC CONNECTION Insert the small end of the AC adapter into the DC IN 12V jack (located on the rear of the unit). Connect the other end to a wall outlet having 120V AC, 60 Hz. AC Adapter, DC 12V Z NOTES: • Remove both the DC plug and the AC-IN plug to disconnect the AC adapter when not in use. • Only use the supplied AC adapter which has the following specs: DC 12V Z BATTERY INSTALLATION Two (2) “AAA” size batteries can also be used to power and/or to provide a backup for the clock an
Inhaltszusammenfassung zur Seite Nr. 9
C CR R22002255 POWER SOURCE (CONTINUED) REMOTE BATTERY INSTALLATION 1. Remove the Battery Compartment by pressing in on the tab and then sliding the compartment out. 2. Install a CR2025 battery, by popping it in through the back of the compartment, paying attention to the polarity diagram in the compartment (positive side up). 3. Replace the Battery Compartment. BATTERY PRECAUTIONS Follow these precautions when using batteries in this device: 1. Warning–Danger of explosion if battery is incorrec
Inhaltszusammenfassung zur Seite Nr. 10
INSERTING AN iPod 1 2 (B) (A) (A) (B) Insert the Universal Dock included Slide the iPod (A) into the with your iPod (A) into the iPod Universal Dock (B) (as shown). compartment (B) (as shown), Gently push down so the making sure the tabs are facing connector on the iPod slides onto front, and slip the tabs into place. the connector on this unit. Press the rear side of the Universal Dock until it is positioned inside the NOTES: iPod compartment. • If this unit is turned on and in FM/AM/LINE IN mo
Inhaltszusammenfassung zur Seite Nr. 11
OPERATION USING AN iPod WITH THIS UNIT 1 2 SNOOZE 1 2 SNOOZE With an iPod connected (see You can operate the iPod using its previous page), if this unit is not own controls, as per its owner’s already on, turn this unit on by manual, or you can use the pressing the Power button 1. controls on this unit to operate Repeatedly press the MODE button the iPod. 2 to select iPod mode; “iPod” will appear in the display. 3 4 SNOOZE SNOOZE 1 2 To play/pause the iPod: To skip forward or backward on the iPo
Inhaltszusammenfassung zur Seite Nr. 12
OPERATION (CONTINUED) ADJUSTING THE VOLUME AND EQ (Equalizer) 1 2 SNOOZE SNOOZE 2 1 To adjust the EQ (Equalizer): To adjust the main volume: Press the EQ button to cycle Press the Volume Up 1 and/or through the following options: EQ1, Down 2 button to increase and/or EQ2, EQ3, EQ4 or Off (Normal). decrease the volume. NOTES: • After you have adjusted the volume setting, if you turn the unit off and then on again, the volume level will be set to the level you selected prior to turning the unit of
Inhaltszusammenfassung zur Seite Nr. 13
OPERATION (CONTINUED) USING THE RADIO 1 2 SNOOZE SNOOZE Turn this unit on by pressing the Repeatedly press the MODE button Power button. to select AM or FM mode; “AM” or “FM” will appear in the display. NOTES: 3 • When a station is tuned, after five seconds, the radio frequency will SNOOZE 1 disappear and the actual time will 2 reappear in the display. • See the previous page for how to Repeatedly press the Tune/ adjust the volume. Skip/Search o 1 or n 2 button to • To turn this unit off, press
Inhaltszusammenfassung zur Seite Nr. 14
OPERATION (CONTINUED) SETTING THE RADIO PRESETS (10 for each band) 1 2 SNOOZE SNOOZE 3 2 Follow Steps 1-3 on the previous Press the Tune/Skip/Search o 1 page to tune a station. Press and or n 2 button to select a desired hold the PRESET/SET button; Preset (1-10). Press the PRESET/ “P1”, will blink in the display. SET button 3 again to confirm, the station will be saved into memory. Repeat to program up to 10 Presets, as desired. RETRIEVING RADIO PRESETS (10 for each band) 1 2 SNOOZE Follow Steps
Inhaltszusammenfassung zur Seite Nr. 15
OPERATION (CONTINUED) TO SET OR RESET THE ACTUAL TIME 1 2 SNOOZE SNOOZE 2 1 Within 15 seconds, press the MIN With the power off, press and hold the TIME SET/DISPLAY button; (Minute) button 1 to set the the time will blink. present minute and the HOUR button 2 to set the present hour. Make sure to set the correct AM/PM setting. DST (DAYLIGHT SAVINGS TIME) 3 1 SNOOZE Press the TIME SET/DISPLAY For your convenience, there is a DST (Daylight Savings Time) switch button (or wait approx. 15 located on
Inhaltszusammenfassung zur Seite Nr. 16
OPERATION (CONTINUED) TO SET OR RESET THE ALARM TIME 1 2 SNOOZE SNOOZE 1 3 2 2 1 Within 15 seconds, press the MIN With the power off, press and hold (Minute) button 1 to set the alarm either the ALARM 1 button 1 (to set minute and the HOUR button 2 to set Alarm 1) or ALARM 2 button 2 (to the alarm hour. Make sure to set the set Alarm 2); the Alarm time will correct AM/PM setting. While the alarm time is blinking, blink in the display. repeatedly press the MODE button 3 to select alarm on for rad
Inhaltszusammenfassung zur Seite Nr. 17
OPERATION (CONTINUED) 5 SNOOZE If set to iPod, select your desired track, insert the iPod as shown on page 9 and turn off the iPod. When the alarm time is reached, the unit will start playback on the track that you selected and the tracks following it in the playlist. The unit will playback for 20 minutes then turn off automatically or, if the remaining playlist has less than 20 minutes of playback time remaining, the unit will just playback the remaining time of the playlist and then stop. NOTE
Inhaltszusammenfassung zur Seite Nr. 18
OPERATION (CONTINUED) TO SHUT THE ALARM OFF 1 SNOOZE 1 2 Press the ALARM 1 1 or ALARM 2 2 button (which corresponds to the alarm that was set) and the alarm will turn off and NOT be set for the next day. To set the alarm for the next day, press any other buttons (except ALARM 1, ALARM 2 or SNOOZE button). NOTE: If set to iPod or Radio, while the alarm is on, if you press any button on the unit (except the SNOOZE/SLEEP button or the Power button), the unit will change from Alarm mode to normal Po
Inhaltszusammenfassung zur Seite Nr. 19
OPERATION (CONTINUED) SLEEP DIMMER SWITCH 1 1 SNOOZE With the unit in the Radio (FM or AM), Slide the DIMMER switch to adjust iPod or LINE IN mode, press the the dimmer of the display. You can SNOOZE/SLEEP button; the SLEEP select between OFF (to turn the indicator and "10" will appear in the display’s backlight off), “L”, “M” or display for five seconds which indicates “H”. “H” is the brightest display, “M” the unit will turn off after 10 minutes. is the middle display and “L” is the Repeatedly
Inhaltszusammenfassung zur Seite Nr. 20
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM CAUSE SOLUTION No sound. Volume is Increase volume. set to minimum. AM or FM, no sound. Power is not on or Press the Power button, AM or FM mode is not then the MODE button to selected. select AM or FM. Volume is Increase volume. set to minimum. AM/FM, poor sound. Station is not tuned Retune the AM or FM properly. broadcast station. FM: Wire Extend FM wire antenna is not an
